HP M281fdw Color LaserJet Pro
Laser, Colour
Questions about HP M281fdw Color LaserJet Pro
What would you like to know?
0 questions and answers
Helpful answer
Yes, that is possible. HP itself writes: "AirPrint is supported on all HP wireless printers introduced from 2010 onwards."
Unfortunately, this item is sold out with us and we have no information on if or when it will be available again.
I have never had any problems with the printer since I bought it. But importantly, there may be some residue on the print cartridge, so clean it with a piece of paper, or if you have scanned, clean the feeder. It has happened to me that I have signed something with blue ink, and then the residue caused the lines when scanning and then printing.
Hello - no duplex scan, but feeder and flatbed for book available.
Helpful answer
If you operate the printer normally on a Windows PC (or network), then you set this in the printer settings. These settings are then always used as the default in programmes such as Word, etc. etc. Windows - Settings - Printers & Scanners - HP Color Laserjet ... and set the settings under "Manage".
How do I set the scanner to run over the feeder?
Currently, the scanner only scans over the surface.
If the sheet feeder is meant, only printing is possible. Scanning is possible via the document feeder (or scanner glass), but the "HP Scan" software must be installed (this software should be able to scan via the document feeder). Manual: http://h10032.www1.hp.com/ctg/Manual/c05543610
Yes, toner is included with delivery. You can start right away.
This MFP can do both. Either you place the original on the glass and scan (flatbed scanner). Or, if you have multiple pages, you can place them on top of the feeder. Then it feeds page by page and scans until they are all captured.
no.
It can be copied directly.
Usb and/or network cables are not included in the scope of delivery.
Helpful answer
However, the toners supplied are not quite full, they only last for about 1000 pages, while the X variants last for just under three times that.
The printer begins to feel neglected, runs away and starts its own business. Last time I was in the United States, I saw one selling corndogs at a fun fair. It was a sad picture...
I can't say that. Check the HP support site to see if there are drivers for your system.
Yes, it works well. I have mine in the study, in the cupboard, ready to go within about 1 minute.
As far as I know, the only way to scan is to open the printer interface and then click on the scan icon. This should then perform a scan of the page. However, I have never used this function before.
You have a 2-year guarantee. For one more year you pay 28.50 CHF, so you have 3 years. Three more years cost 43.30 CHF
Helpful answer
Exactly, the printer switches to black and white mode and continues printing!
According to the manufacturer, the toners from the MFP M177 are only shared with the MFP M176.
Please contact our customer service directly with your order number. A solution can then be suggested accordingly. https://www.digitec.ch/de/Information/ContactInformation
Comparison: https://www.galaxus.ch/de/Comparison/6596296-5622697 In short: The 477 is faster, has duplex scanning, larger paper trays, better warranty conditions and the 477 has cheaper page prices because the toners have a higher range.
I am not an expert but I would delete the drivers, reinstall everything, restart everything and then recalibrate the printer. Greetings Marcel
30 of 45 questions