Best Emcotec products in the RC electronics accessories category
On this page you'll find a ranking of the best Emcotec products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Emcotec sps pin switch
A72025.
2. Emcotec spare pins for dpsi pin switch (2 pcs.)
A18025.
3. Emcotec dpsi magnetic switch transmitter (board) 90cm
Switch transmitter for the DPSI RV family / DPSI TWIN / DPSI LR.Generates the on/off signal for the electronic switch in the respective system.The on/off switchingprocess is done with an external magnet. No "damage" to the fuselage side wall necessary (except for the hole for the ultra-bright 3mm control LED). Extremely low space consumption (e.g. glider hulls)The switch-off process of the DPSI works with a Hall sensor. Hall sensors react to magnetic fields. In the case of very strong magnetic fields (e.g. electric drive), the DPSI may switch off under certain circumstances. Cables carrying current generate a magnetic field. Therefore, please lay all cables carrying a very high current (>100A) at a distance of at least 3cm past the DPSI. A18030-90cm.
4. Emcotec battery backer dpsi 2001 rv
A11025-1.
5. Emcotec sps tank cap switch blue led
PLC tank cap switch sensor with blue LED for the SPS SafetyPowerSwitch. A72021.
6. Emcotec dpsi tank cap switch 90cm
Elegant switch transmitter for the DPSI dual power supplies. Generates the on/off signal for the electronic switch in the respective system.The on/off switchingprocess takes place with an external magnet. When the magnet is inserted, the system is switched off; when it is pulled out, it is switched on.The red switching magnet is automatically held in the DPSI tank cap switch sensor by the magnetic force. The switched-on system is indicated by a brightly lit red ringFault conditions or battery undervoltage are signalled by flashing codes via the ring in the tank cap switch transmitter.Absolutely fail-safe switch concept with a combination of reed switch and Hall sensor.Compatible DPSI dual power suppliesBattery switch DPSI 2001 RVAbattery switch DPSI 2001 RV version 2014Battery switch DPSI 2010 RVDPSI RV Mini battery switchBattery switch DPSI 2018The switch-off process of the DPSI tank closure switch transmitter works with a Hall sensor. Current-carrying cables generate a magnetic field, Hall sensors react to magnetic fields. In the event of very strong magnetic fields (e.g. electric drive), the DPSI tank cap switch sensor may switch off under certain circumstances. Therefore, please route all cables that carry a very high current (>100A) at a distance of at least 3cm past the DPSI tank cap switch sensor. A18081.
7. Emcotec dpsi magnetic switch (housing) 30cm
Switch transmitter for the DPSI RV family / DPSI TWIN / DPSI LR.Generates the on/off signal for the electronic switch in the respective system.The on/off switchingprocess takes place with an external magnet.Connection possibility for two commercially available battery controllers on the rear.Mounting on the inside of the fuselage possible.ATTENTION: when used with the DPSI RV of older design (before June 2009), the DPSI must be sent to Hacker and slightly modified (free of charge). The other DPSIs (Mini, Magic, 2001 RV) are not affected by this! The magnetic switch transmitter cannot be used with the DPSI TWIN.The switch-off process of the DPSI works with a Hall sensor. Hall sensors react to magnetic fields. In the case of very strong magnetic fields (e.g. electric drive), the DPSI may switch off under certain circumstances. Cables carrying current generate a magnetic field. Therefore, please route all cables carrying a very high current (>100A) past the DPSI at a distance of at least 3cm. A18029.
