The popular Aqua Color paints are now available in all 88 colours. Model builders no longer have to compromise and can use this acrylic colour system for all their colour requirements. The advantages of this colour system are Revell Aqua Color paints in novel 18 ml containers that are ideal for processing. The paints can be diluted with water, have a mild odour, are non-flammable and contain practically no organic solvents. There are 88 different colours that can be mixed with each other. The paint is completely dry after 2 to 3 hours, and it is possible to paint over a colour after just one hour, which means it is six times faster than with Enamel Colour paints. The new colours and the existing Enamel-Color colours (14 ml) can be easily painted over each other after the drying time, but cannot be mixed with each other. The colour is also suitable for airbrushing. Please note the following: The paint must not be diluted too much, a maximum of 20 to 25 % with water. It is best to dilute the paint with Aqua Color Mix, as this acts as a drying retarder and prevents the paint from drying too quickly in the spray gun. The spray gun should be cleaned with water immediately after use. If the paint has already dried, the spray gun can also be cleaned with Airbrush Clean or Aqua Colour Clean. For application with a brush: The colours are brushable and are characterised by high opacity. Smooth surfaces after brushing are almost as good as with airbrushing. The end result is absolutely comparable with the enamel colours and offers exceptional results when brushing.