EUR724,35
Dreame X40 Master
12000 Pa, Wiping pads (rotating)
Questions about Dreame X40 Master
What would you like to know?
0 questions and answers
I bought a "used" X40 from Digitec.
But it was certified and checked by DIGITEC.
Mine was absolutely NEW. But it's possible that if you return it, you have to reckon with the fact that someone has run the device 1-2 times, I think. But that's my opinion.
-->-->--> Unfortunately the water leaked from my X40 Mater.
I could have sent it back to Digitec under warranty without any problems.
But I opened the device myself and the manufacturer straightened a hose that was kinked.
It's been an absolutely fantastic device ever since.
Helpful answer
Yes
Galaxus
8 months ago
Yes, the device requires a WLAN to connect to the app and to enable functions such as control and configuration. The device is set up via the app by connecting it to a 2.4 GHz WLAN.
Automatically generated from the .
Helpful answer
Scope of supply :
Flexible water supply hose (1/4") approx. 8m.
Drain hose (3/8") also approx. 8m.
A water inlet with 3/8" male threaded connection is required for the water supply.
Unfortunately, I can't give you any precise details at the moment. It is not yet clear when the X50 Master will be available. As soon as our buyers have access, the product will be launched immediately.
Helpful answer
Hello, sorry I don't have a threshold and I can't answer your question.
Helpful answer
I agree with the masses, I put the waste water hose in the sink to test it and attached it to the tap. That was over a metre and still worked. In the end, I have the drain at approx. 60cm, which works without any problems.
Helpful answer
I have installed another siphon from the Bächlein brand, which has another connection. Simply google "siphon with appliance connection". According to the instructions, the maximum height for the waste water hose should not exceed 80 cm from the floor.
Unfortunately, I have no experience with the other questions, as my flat has none of the obstacles you describe.
Helpful answer
I screwed the 3-way valve onto the angle valve and the tap from the washbasin onto the 3-way valve. All the necessary seals were included and everything was tight right from the start. The plastic hoses give me a good impression, as long as they are not crushed, kinked or overheated, they should last without any problems. So far I'm happy with the station and the Robi😊
The Complete model has a removable water tank, while the model you mentioned has an integrated direct water connection. The floor cleaning functions are otherwise comparable.
12 of 12 questions