Printing technology: FDM
Printing media: Wood
Device specific: No
Color: Light wood
Weight: 500 g
Diameter: 1.75 mm

Due to its low tendency to warp, wood can be printed without a heated bed. If a heated bed is used, the recommended temperature is approximately 35–60 °C. Wood can be used with all common 3D desktop printers that utilize FDM or FFF technology. We recommend using a nozzle larger than 0.4 mm. Storage should be cool and dry (15–25 °C) and protected from UV light to significantly increase shelf life.

RS's wood filament is a modified, PLA-based filament type that smells and feels like wood. The filament is somewhat brittle but robust enough to be delivered in rolls ranging from 300 grams to 1 kg. It prints easily, but we recommend a slightly larger nozzle to avoid clogs. Due to its low shrinkage factor, wood does not deform after cooling. Polylactic acid is a biodegradable plastic made from renewable natural resources and is one of the most popular materials for 3D printing.

It feels like wood and smells like it too. It is easy to print at low temperatures and has very little warping. It is biodegradable and should preferably be printed with a nozzle larger than 0.4 mm. After purchasing the filament, it is important to store it properly to maintain quality. Over time, the plastic absorbs moisture from the air, leading to small water bubbles in the filament. These bubbles can quickly reach boiling point when heated in the extruder nozzle, which can damage the print. The use of desiccants for moisture absorption is highly recommended.