No, there is not, but the lens is further inside and thus partially protected. Mine hangs in the air, so I have never missed a lens protector until now.
Hello. I've never had this problem with the beamer. And it's certainly not the xbox?
Tip: if you are sure that the problem is with the projector (and not the cable or source), file a warranty claim with Digitec/Galaxus. They are very responsive and helpful from experience.
Not such a stupid question. So far, I have only rarely managed such WLAN connections (computer/beamer, computer/TV, TV/beamer, camera/computer ...), and I dutifully use a cable - which then also works. Regarding your question: theoretically it should be possible, but how it works in practice is anything but clear. You would have to try it out on this beamer.
I read here that it is supported: https://www.projectorreviews.com/lg/lg-hu70la-cinebeam-thinq-4k-projector-review-special-features/
However, LG itself can only confirm ARC via the website and hotline and not eARC.
Has anyone already tried it out?
Hi. In my experience, streaming movie sound via Bluetooth unfortunately does not give satisfactory results because the picture and sound are not in sync. With this beamer, the sound is best routed to the speakers with HDMI Arc. Unfortunately, truly wireless enjoyment is not yet realistic.
Asked LG support (UK) today and they couldn't say conclusively. They confirm that 03.00.06 is the current version. So maybe this is already WebOS 4.5? (I don't know why the versioning would be different, I don't have a separate 4.5 device for direct comparison).
We are very sorry for this inconvenience :( it is best to contact our customer service directly on digitec@digitec.ch, our team will take care of this case.
!!!CAUTION!!! NO NATIVE 4K!!!!!
The specifications state that the image resolution is 3840 x 2160 pixels. However, it does not state that it is not native, because native is "only" Full HD, and 4K resolution is achieved by shifting. Unfortunately, this information is also not on the LG homepage. Other beamer tech sites clearly point to it. I understand that digitec only represents the information that the supplier provides, but in my opinion it is very important to know that native 4K resolution for 1999.- (1399.- today, 19.03.2020) is not real and the lack of information on the part of digitec can strongly influence a purchase decision.
The beamer can be connected wirelessly via Bluetooth. I have connected my old stereo system this way and it is easily sufficient for streaming films. It's not enough for Bluray 4k, but you can save the "extra loop" via the projector anyway and it's better to connect the player directly anyway.
Sonos audio via WLAN is Sonos-specific and I know of neither a beamer nor a TV that can do this. If there is a Sonos audio bridge to WLAN, then the beamer also has HDMI ARC and optical for a digital feed and hopefully the quality question would then become superfluous ;-) But I don't know whether Sonos can also use these standards... (besides PCM, Dolby, DTS and so on should be mentioned). Otherwise, you can also set the digital outputs to PCM. With PCM, however, you are probably not far away from Bluetooth in terms of quality.
Hi, I've had the LG HU70LS for about 3 months and I'm very satisfied. The device has one drawback: When I try to install the Disney + app, I get the message that a system update should be made. Unfortunately, there is no new update from LG. So I can watch Disney+ via the internal browser in the device, but unfortunately it is very slow until the desired film is on. Because on the Netflix app, everything runs subito fast and the desired film is started all of a sudden. There is also the option of bringing the Disney+ to the projector via pad or computer, where it also runs flux. However, I appreciate the possibility of projecting directly via the projector, without any other device.
Question: Is there a way to get an update from LG? Does anyone have a tip? Thank you.
I cannot answer this very specific question because I do not know your frame. The beamer has 4 holes on the belly side at the distance of a square 125x130 mm, in the same rectangular direction as the beamer. This means that the projection is parallel to the narrow sides (lens is on the wide side), and the 125 mm are also in this direction. Very precise M4 screws fit into these holes.
Don't forget, the beamer has quite a chunk as a power supply: 85x181mm and 28 mm thick. The power connections are vis a vis the two narrow sides.
If it is useful to you, you are welcome to have a look at my beamer. I live in the Baden/Brugg region, and I agree if Digitec gives you my e-mail address or home address/phone number.
What do you want to use the projector for? It may be fine for TV and games, but for projecting true colour images, the settings of the device don't work. Take a look at the review of the projector at www.projektorcentral.com. The HU70LA(*) only manages 800 ANSI lumens at best, and if you select Expert Mode for real colours, it's barely 600 lumens. This is sufficient for a dark room. - For nice colours I project from my laptop, with HDMI cable and Spyder calibration. That works quite well.
(*) The HU70LA is the version offered in the USA, unfortunately not in Europe. This is the HU70LS, but with an additional digital TV tuner and the socket for TV cable connection. This is discreetly covered in the European version. Too bad!
Is there a possibility to buy it at the offer price, I wanted to buy it yesterday, but it didn't work, today there was only one left, this one couldn't be bought, otherwise I would have bought it a long time ago, it's a real pity about the good beamer. Would be nice that if you want to buy something it also dunktioniert, had already times the problem on Black Friday :(
If one was returned, I would buy it immediately.
Hope the right people read this
Otherwise great shop, I have already ordered a lot here.
