The PowerBox MicroMatch is used wherever a battery switch cannot be accommodated or where the switch does not offer this function. With the help of the MicroMatch, the servo travel and center positions of both outputs can be easily adjusted. This allows two servos working together on a control surface to be electronically synchronized. The servos no longer work against each other, and the torque and speed of both servos are fully utilized. Another positive effect is that power consumption and wear of the servos are significantly reduced. A servo reverse function allows the direction of the servos to be reversed with just one click. This enables mirror-image mounted elevator servos to be operated on a single channel. Double rudder or nose wheel controls are additional application cases. All settings can be made using the USB interface cable (also compatible with Jeti and MPX) or the BlueCom™ adapter. The BlueCom™ is particularly convenient as you can work directly on the servo arm and make adjustments easily via Bluetooth with your mobile phone! The MicroMatch is updateable, so future expansions in functionality are not an issue.

Features:
• Servo match function on both outputs
• Direction, center, and end points can be precisely adjusted
• Programmable via phone app (BlueCom) or PC (USB)
• Quick reverse function
• Output frame rate adjustable
• 16-bit processor for fast signal processing
• 4096 steps resolution for the latest servo generation
• Noise suppression and pulse amplifier function
• Highest current capacity, limited only by the connector
• Updateable via BlueCom or USB interface adapter

Technical specifications:
Operating voltage: 4.0V - 9.0V
Current consumption in operation: 22mA
Current capacity: >10A
Signal input: PWM
Channels: 1
Programmable servo outputs: 2
Servo pulse resolution: 4096
Pulse repetition rate: 12ms, 15ms, 18ms, 21ms.