The new Turnado V3 Glider seamlessly integrates into our program for glider nose drives/FES. Thanks to the shaft extension with the built-in support bearing, this drive can also be installed in slim glider noses.

• The shaft can be easily adjusted by loosening the three M3 screws on the back. The model can be converted back to a glider in no time. E-flight and glider towing can be alternated.

• Based on the proven Hacker A50-Turnado, which has been tested thousands of times.

• Free shaft with a diameter of 6 mm, suitable for common prop adapters and scale spinners.

Application area: Glider nose drive/FES:

• Perfect as a nose drive for takeoff on its own landing gear with a small propeller.

• Suitable for gliders up to approximately 14 kg: 8S LiPo, RFM 13x10, Master Mezon 120 lite (current draw approximately 65-70A in flight).

• Suitable for gliders up to approximately 16 kg: 8S LiPo, RFM 14x10, Master Mezon 120 lite (current draw approximately 75-80A in flight).

Technical specifications of the motor: (Overall dimensions see image above)

No-load current at 8.4V: 1.1A

Internal resistance: 0.026 Ohm

No-load RPM per volt: 400 RPM

Weight: 445g

Outer diameter: 51.5 mm

Length: 61 mm

Number of poles: 10

Recommended ESC: 80A-130A Brushless

Recommended timing: 20°-25°

Shaft diameter: 6 mm (internal 8 mm)

Mounting thread: M4, 25 / 30 mm.