Best selling Water pumps from Vortex
This page always stays fresh and updates automatically.
1. Vortex Domestic hot water pump BWO 200 BLUEONE without control module
Vortex Domestic Water Pump BWO 200 BLUEONE without control module: V-housing, 230 V, 1″ external, continuous operation function, suitable for large pipe cross-sections, average power consumption 9.5 W, vent screw on the pump housing, includes insulation shell, maximum delivery data 1.3 m WS/1500 l/h, EC motor in ball motor design, 140 mm installation length.
Additional technical specifications: Motor speed control: none, nominal flow rate: 1.5, pressure stage of the item: PN 10, absorbed motor power (P1): 12 kW, double pump: No, insulation class according to IEC: F, maximum medium temperature (continuous operation): 95, delivery height at nominal flow rate: 13, housing material: brass, oval flange shape: No, communication bus: none, electrical connection: connection terminals, frequency: 50 Hz, installation length: 140 mm, pump height: 107, minimum medium temperature (continuous operation): 2, material quality: other, nominal current: 0.065 A.
Outlet side connection: external cylindrical gas thread BSPP (ISO 228-1), inlet side connection: external cylindrical gas thread BSPP (ISO 228-1), outlet side connection standard: ISO 228-1, inlet side connection standard: ISO 228-1, number of phases: 1, rated voltage: 230 V, speed: 3000 rpm, diameter of inlet side connection: 1 inch (25), delivery height at flow rate (BEP): 10.5 kPa, UBA positive list mark: Yes, power consumption of the pump (solpump): 12 W, power consumption of the pump in standby: 0 W, medium temperature (continuous operation): 2 degrees Celsius, nominal diameter: DN 20, nominal diameter outlet side connection: 1 inch (25), outer diameter of outlet connection: 22 mm, outer diameter of inlet connection: 22 mm, ambient temperature: 2 degrees Celsius, flow rate (BEP): 0.7 m³/h, material of the impeller: other, maximum working pressure: 10 bar, maximum delivery height: 1.3 m, maximum pump volume: 1.5 m³/h.
2. Vortex Radio switch 230 V, for BWO 155 MA
Radio switch for an additional socket to manually activate the pump BWO 155 MA. Up to 15 radio switches can be used with one pump. Design: white high-gloss plastic. Technical data: 1~230 V / 50 Hz, contour plug (Schuko). Additional technical features: connection voltage 1x 230 V, number of phases 1, type of accessory/replacement part control and regulation system, design type surface-mounted, frequency 50 Hz, power consumption 0.3.
3. Vortex W-valves interchangeable set
The W-Valve replacement set from Vortex is a high-quality accessory for water pumps that functions as both a check valve and a shut-off valve. With a total installation length of 138 mm and a robust brass housing, this product offers a reliable solution for various applications. The precise dimensions of 33.25 mm in width and height, along with a length of 41 mm, make the replacement set versatile. It is compatible with dimensions of 1/2" female thread and 1" female thread, allowing for easy integration into existing systems. The W-Valve replacement set is listed on the UBA positive list, underscoring its suitability for use in drinking water systems. This product is ideal for professionals and DIY enthusiasts who value quality and durability. With the Vortex W-Valve RV+KV, you receive a reliable and effective accessory that optimizes the functionality of your water pump.
4. Vortex Universal motor BLUEONE BWO 155 SL
Suitable for Vortex with spherical motor - Grundfos UP 15-13, Grundfos UP 15-14, Grundfos UP 20-14, Grundfos UPS 15-14, Grundfos UPS 20-14, Laing/ITT/Lowara E1-13/100, Laing/ITT/Lowara E1-15/700, Laing/ITT/Lowara S1-13/100, Laing/ITT/Lowara S1-15/700.
Other technical features:
- Supply voltage: 1x 230V
- Number of phases: 1
- Type of speed control: stepless
- Absorbed motor power (P1): 9kW
- Absorbed motor power (P1) (1): 0.009kW
- Rated voltage: 115V
- Speed: 3000 1/min
- Speed control: motor built-in
- Pressure stage article: PN 10
- Installation length: 110mm
- Electrical connection: terminals
- Head at nominal volume flow rate: 13
- Head at volume flow rate (BEP): 28kPa
- Frequency: 50/60 Hz
- Insulation class according to IEC: F
- UBA positive list label: Yes
- Power consumption of the pump (solpump): 9W
- Power consumption of the pump in standby: 0.0W
- Medium temperature (continuous operation): 2 degrees Celsius
- Min. medium temperature (continuous operation): 2 degrees Celsius
- Nominal current: 0.02A
- Nominal volumetric flow: 0.95
- Pump height: 125
- Protection class (IP): IP44
- Ambient temperature: 40 degrees Celsius
- Volumetric flow (BEP): 1.8 m3/h
- Max. working pressure: 10 bar
- Max. delivery head: 1.3m
- Max. medium temperature (continuous operation): 95
- Max. pump volume: 0.95 m3/h.
5. Vortex BW pump BLUEONE BWO 155 V ERT with electronic control thermostat
The BW pump BLUEONE BWO 155 V ERT from Vortex is a powerful water pump that is ideal for irrigation applications. With a robust V-shaped housing and a ball motor, this pump offers reliable performance and a maximum delivery height of 1.3 mWS. The pump is designed for continuous operation and can achieve a flow rate of up to 950 l/h. Thanks to the integrated electronic control thermostat and the stepless speed control, the pump performance can be precisely adjusted to meet specific requirements. The IP 44 protection class ensures safe use in various environments, while the insulation class F and the maximum medium temperature of 95 °C highlight the pump's durability and reliability. The BW pump is equipped with a ball shut-off valve and a check valve, making handling and maintenance easier.
- Integrated electronic control thermostat for precise temperature control
- Stepless speed control for flexible adjustment of pump performance
- Maximum delivery height of 1.3 mWS and flow rate of up to 950 l/h
- Robust brass housing for high durability
- Continuous operation and stop function for versatile applications.
6. Vortex Blueone BWO
With ball motor, V-housing, R 1 1/4″ external thread with screw/solder fittings, 1/2″ external/Ø 15 internal. Max delivery head: 1.3 mWS. Max flow rate: 950 l/h. Voltage: 115-230 V, frequency: 50-60 Hz. Power consumption: 2.5-9 W. IP rating: 44. Temperature range: 2 to 95 degrees Celsius. Speed range: 2000-3000 1/min.
Further technical features:
- Insulation class according to IEC: F
- Pump height: 110 mm
- Delivery head at nominal volume flow: 13
- Communication bus: None
- Oval flange shape: No
- Nominal volume flow: 0.95
- Pressure rating: PN 10
- Electrical connection: Connection terminals
- Housing material: Brass
- Motor speed control: Built-in
- Double pump: No
- Motor power absorbed (P1): 9 kW
- Material quality: Other
- Nominal current: 0.02 A
- Connection outlet side: External thread gas cylindrical BSPP (ISO 228-1)
- Connection inlet side: External thread gas cylindrical BSPP (ISO 228-1)
- Connection standard outlet side: ISO 228-1
- Connection standard inlet side: ISO 228-1
- Number of phases: 1
- Type of speed control: Infinitely variable
- Rated voltage: 115 V
- Speed: 3000 1/min
- Diameter, connection inlet side: Other
- Delivery head at volume flow (BEP): 9.8 kPa
- Labelled UBA positive list: Yes
- Length of connection: 174
- Power consumption of pump (solpump): 9 W
- Power consumption of pump in standby mode: 0.0 W
- Nominal diameter: DN 20
- Outer pipe diameter, connection outlet: 15 mm
- Outer pipe diameter, connection inlet: 15 mm
- Ambient temperature: 40 degrees Celsius
- Volume flow (BEP): 0.35 m3/h
- Material of the impeller/blower impeller: Other
- Max working pressure: 10 bar
- Max delivery head: 1.3 m
- Max pump volume: 0.95 m3/h.
7. Vortex BW pump BLUEONE BWO 155 R ERT with electronic control thermostat o Verschr.
BLUEONE domestic water pump without connection fittings, featuring an electronic control thermostat. Equipped with a ball motor, R housing, and R 1/2″ internal thread. The maximum delivery head is 1.3 mWS and the maximum flow rate is 950 l/h. Operating voltage of 115-230 V at 50-60 Hz, with a power consumption of 2.5-9 W and protection class IP 44. The temperature limit is 95 °C and the speed range is 2000-3000 rpm. Includes insulation shell, but does not come with a ball shut-off valve and check valve.
Additional technical specifications:
- Insulation class according to IEC: F
- Max. medium temperature (continuous operation): 95 °C
- Delivery head at nominal flow rate: 13
- Nominal flow rate: 0.95
- Pressure rating of the item: PN 10
- Motor speed control: built-in
- Double pump: No
- Motor power input (P1): 9 kW
- Pump control: Temperature
- Pump height: 125
- Installation length: 80 mm
- Min. medium temperature (continuous operation): 2 °C
- Communication bus: none
- Oval flange shape: No
- Electrical connection: terminal blocks
- Housing material: brass
- Frequency: 50/60 Hz
- Material quality: other
- Nominal current: 0.02 A
- Outlet side connection: internal cylindrical gas thread (BSPP)
- Inlet side connection: internal cylindrical gas thread (BSPP)
- Outlet side connection standard: ISO 228-1
- Inlet side connection standard: ISO 228-1
- Number of phases: 1
- Type of speed control: stepless
- Rated voltage: 115 V
- Speed: 3000 rpm
- Diameter, inlet side connection: other
- Delivery head at flow rate (BEP): 9.8 kPa
- UBA positive list identifier: Yes
- Power consumption of the pump (solpump): 9 W
- Power consumption of the pump in standby: 0 W
- Medium temperature (continuous operation): 2 °C
- Nominal diameter: 1/2 inch (15)
- Nominal diameter, outlet side connection: other
- Pipe outer diameter, outlet connection: 18 mm
- Pipe outer diameter, inlet connection: 18 mm
- Ambient temperature: 2 °C
- Flow rate (BEP): 0.35 m³/h
- Material of the impeller: other
- Max. operating pressure: 10 bar
- Max. delivery head: 1.3 m
- Max. pump volume: 0.95 m³/h.
Water pumps
EUR263,25
Vortex BW pump BLUEONE BWO 155 R ERT with electronic control thermostat o Verschr.
8. Vortex Universal motor BLUEONE BWO 155
Suitable for Vortex with spherical motor - Grundfos UP 15-13, Grundfos UP 15-14, Grundfos UP 20-14, Grundfos UPS 15-14, Grundfos UPS 20-14, Laing/ITT/Lowara E1-13/100, Laing/ITT/Lowara E1-15/700, Laing/ITT/Lowara S1-13/100, Laing/ITT/Lowara S1-15/700.
Other technical features:
- Supply voltage: 1x 230 V
- Number of phases: 1
- Type of speed control: Stepless
- Absorbed motor power (P1): 9 kW
- Absorbed motor power (P1) (1): 0.009 kW
- Rated voltage: 115 V
- Speed: 3000 1/min
- Speed control: Motor built-in
- Pressure stage article: PN 10
- Installation length: 110 mm
- Electrical connection: Terminals
- Head at nominal volumetric flow: 13
- Head at volumetric flow (BEP): 9.8 kPa
- Frequency: 50/60 Hz
- Insulation class according to IEC: F
- UBA positive list label: Yes
- Power consumption of the pump (solpump): 9 W
- Power consumption of the pump in standby: 0.0 W
- Medium temperature (continuous operation): 2 degrees Celsius
- Nominal current: 0.02 A
- Nominal volumetric flow: 0.95
- Pump height: 110
- Protection class (IP): IP44
- Ambient temperature: 40 degrees Celsius
- Volumetric flow (BEP): 0.35 m3/h
- Max. working pressure: 10 bar
- Max. delivery head: 1.3 m
- Max. medium temperature (continuous operation): 95
- Max. pump volume: 0.95 m3/h.
9. Vortex BW pump BLUEONE BWO 155 V MA ONdemand module 1/2inch external d= 15mm internal
V-housing - 230 V/50-60 Hz - with radio receiver and radio switch.
Further technical features:
- Pump circuit: other
- Pump height: 125
- Insulation class to IEC: F
- Max. medium temperature (continuous operation): 95
- Installation length: 110 mm
- Delivery head at nominal volume flow: 13
- Min. medium temperature (continuous operation): 2
- Communication bus: without
- Oval flange shape: No
- Nominal volume flow: 0.95
- Pressure stage article: PN 10
- Electrical connection: terminals
- Motor speed control: built-in
- Housing material: brass
- Frequency: 50/60 Hz
- Double pump: No
- Absorbed motor power (P1): 0.009 kW
- Material grade: other
- Nominal current: 0.02 A
- Connection outlet side: external thread gas cylindrical BSPP (ISO 228-1)
- Connection inlet side: external thread gas cylindrical BSPP (ISO 228-1)
- Connection standard outlet side: ISO 228-1
- Connection standard inlet side: ISO 228-1
- Number of phases: 1
- Type of speed control: stepless
- Absorbed motor power (P1) (1): 9 kW
- Rated voltage: 115 V
- Speed: 3000 1/min
- Diameter, connection inlet side: other
- Delivery head at volume flow (BEP): 9.8 kPa
- UBA positive list mark: Yes
- Length of connection 1: 174
- Power consumption of pump (solpump): 9 W
- Power consumption of pump in standby mode: 0.6 W
- Medium temperature (continuous operation): 2 degrees Celsius
- Nominal diameter: DN 20
- Nominal diameter, outlet connection: other
- Outer pipe diameter, outlet connection: 15 mm
- Outer pipe diameter, inlet connection: 15 mm
- Ambient temperature: 40 degrees Celsius
- Flow rate (BEP): 0.35 m3/h
- Impeller material: other
- Max. working pressure: 10 bar
- Max. delivery head: 1.3 m
- Max. pump volume: 0.95 m3/h.
Water pumps
EUR345,87
Vortex BW pump BLUEONE BWO 155 V MA ONdemand module 1/2inch external d= 15mm internal
Domestic water pump
10. Vortex Sealing ring 10 pieces (1 bag)
The Vortex sealing ring is an essential accessory for water pumps with ball motors. This product is delivered in a convenient bag containing 10 pieces, providing a sufficient quantity for various applications. Made from durable plastic, the sealing ring ensures a reliable seal and contributes to the efficiency of the pump. With a width of 61 mm and a height of 3.5 mm, this sealing ring is specifically designed to meet the requirements of pumps. The use of high-quality materials ensures a long lifespan and optimal performance. The sealing ring is ideal for use in various environments and applications where a reliable seal is required.
- Made from durable plastic for high resistance
- Suitable for pumps with ball motors
- Delivered in a convenient bag containing 10 pieces.
Product order
See all products