Best selling Machine accessories from Pferd
On this page you'll find a ranking of the best Pferd products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Pferd Clamping bolt 10-50 mm for felt discs and cloth rings
Bolts and shanks for holding fine grinding and polishing tools are available with various threads and shank diameters, as well as in different designs. Compatible tool holders for Polinox compact grinding wheels, Polinox grinding wheels, Poliflex fine grinding discs, felt discs, and cloth rings. Ø 20 mm clamping range 10-50 mm shank MK1.
2. Pferd Extension for drive spindles SPV 150-6 S8
With extensions for drive spindles, the shafts of grinding and milling tools are lengthened. They enable use in hard-to-reach areas and are clamped into the collet of the machine (pneumatic or electric drive) or into the handpiece of the bending shaft. Extensions for drive spindles are a cost-effective alternative to custom-made milling and grinding pins with long shafts.
Safety Notice:
Caution! When using spindle extensions, the applicable safety regulations and accident prevention regulations must be observed. When working with long shaft lengths, it is essential to insert the tool into the workpiece (e.g., holes, pipes, channels, or grooves) before switching on the drive machine. The extension must never run freely with the tool outside of the workpiece. Failure to comply increases the risk of accidents! Under unfavorable conditions, there is a possibility of the extension bending with the clamped tool. The extension is only suitable for manual use in conjunction with appropriate pneumatic, electric drives, or bending shaft handpieces for tools with standard shafts. It is used in conjunction with a tool approved for the corresponding speed in the impact-free collet of the devices. It must never be clamped on the transition radius. Clamping a second extension or tools with excessively long shafts is prohibited.
3. Pferd Accessories for ALUMASTER, carbide reversible cutting plates Ø 8 mm
Machine accessories
EUR189,–
Pferd Accessories for ALUMASTER, carbide reversible cutting plates Ø 8 mm
4. Pferd STV13 L500
5. Pferd EF-WSP-A 30°
Cutting insert holders for the EDGE FINISH system for work on edges.
6. Pferd SPVH13 L300-6 S6
With extensions for drive spindles, the shafts of grinding and milling tools are lengthened. They enable use in hard-to-reach areas and particularly deep holes. They are clamped into the collet of the machine with pneumatic or electric drive or into the handpiece of the bending shaft and must additionally be guided by hand. Extension for drive spindles for manual use with a diameter of 13 mm, a length of 300 mm, a tool holder of 6 mm, and a shaft holder of 6 mm. Includes 2 clamping wrenches DM SW 6/7 mm and 1 collet 6 mm. Max. RPM 25,000 including 6 mm collet.
7. Pferd Bending shaft BW 10 DIN10/G28 750-18000min-¹ DIN 10/30 mm/G 28/28mm
Speed and power range should not be under or exceeded. Radius of curvature should not be smaller than 170 mm. Further technical features include a weight of 2.66 kg.
Machine accessories
EUR985,20
Pferd Bending shaft BW 10 DIN10/G28 750-18000min-¹ DIN 10/30 mm/G 28/28mm
8. Pferd POLIVLIES Velcro holder PVKRH 180 M14
9. Pferd Tool holders
Accessories for mounting small cutting discs on straight grinders. Sturdy design with maximum shaft breakage safety. Shaft diameter 6 mm.
10. Pferd 87100727
PFERD 87100727.
