Best Abus products in the Home security accessories category
On this page you'll find a ranking of the best Abus products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Abus Frame for 3 modules for flush mounting
Total modular: The video intercom system
See who is at the door, talk to them, and open the door. Modular and easily adaptable to any building – with the appropriate mounting frame.
Discreetly flush-mounted: Your ModuVis installation
When installing ModuVis modules (video module, doorbell button module, etc.), you can choose between surface-mounted and flush-mounted installation. You can select from a single-module frame (for 1 module), a double frame, and a triple frame (for 3 modules). This mounting frame is suitable for flush mounting of 3 modules.
Totally modular, extensively expandable
A clear advantage: Depending on the number of apartments or living areas and the local needs, modules can simply be added to the system, such as an info module with nameplate, doorbell button module, or keypad for keyless access via PIN code. If 3 modules are installed, the triple mounting frame is the first choice. If 3 modules are planned but not all are installed during the initial setup, the triple frame can still be chosen, and the unused part can be covered with a blank module (blind cover).
2. Abus Terxon SX/MX LCD control panel
Abus AZ4110 Terxon SX/MX LCD Control Panel
The LCD control panel is an expansion module for the Terxon SX and Terxon MX. Mounted near the entrance, it allows for quick operation of your alarm control panel. The LCD control panel connects to the Terxon SX/MX via a 4-wire bus wiring. Up to 4 control panels can be integrated into the alarm system. Placed in different areas of your building, these expansion modules provide added convenience. From any control panel, the system can be easily activated or deactivated using a PIN code and proximity chip key. Additionally, the status of the control panel is displayed on the clear text display of the control panel. You can calmly view and modify system settings, programmed configurations, and the 250-event memory of the Terxon SX/MX here. The LCD control panel is elegantly designed in white, making it not only a valuable addition to any entrance area but also visually compatible with all wireless components of the Secvest.
- For operating and programming the alarm control panel
- Suitable for indoor and protected outdoor areas
- Operate your alarm control panel with a PIN code or proximity chip key
- Integrated proximity chip key reader
Note: According to the manufacturer, this product should only be installed by qualified partners.
3. Abus Control unit FUAA50500 Touch Secvest
Design Meets Security
The central unit of the Secvest Touch wireless alarm system features an elegant touch interface that meets the highest design standards. Its capacitive control panel can either be permanently illuminated or become visible only upon touch. An integrated brightness sensor ensures that the lighting dynamically adjusts to the current light conditions. Depending on the brightness, the display is always optimally readable. Additionally, the cleaning mode allows the cover to be cleaned without unintentionally triggering any functions.
Proven Comprehensive Protection
For years, the Secvest has been one of the most successful alarm systems on the security market. In addition to classic alarm functions for protection against burglary, fire, water, and emergencies, it offers a variety of modern security features: Electronic access control systems can be directly integrated into the alarm system. This allows users to maintain maximum control over all movements within the building at all times. Live video verification is also possible with the Secvest Touch wireless alarm system. Users can integrate up to six IP cameras into the system and conveniently access the live streams via web browser or app at any time. With its mechatronic detectors, the Secvest Touch wireless alarm system also provides the unique double burglary protection that is only available from ABUS.
Extensive Detector Portfolio and Diverse Control Options
With 48 wireless and four wired detectors, the system offers not only the highest security for up to 50 users but also the ability to automate processes and simulate presence, such as during vacations. The worldwide control via Android/iOS app is an absolute highlight. Various other options, such as code entry, proximity chip keys, or remote control, also cater to different user preferences.
4. Abus PSTN dialer
The dialer for voice and text messages connects the alarm system (wireless/wired) to the telephone network. When the alarm control center sends an alarm or status message, the dialer transmits this as voice or text (call/SMS with saved wording) to a landline or mobile phone.
Silent alarm via telephone: If the alarm system triggers a silent alarm, the dialer forwards this to the phone. Through wired inputs, 8 events (e.g., burglary, robbery, medical emergency, fire) are available, each associated with an event text (SMS, voice). Up to 8 messages can be sent to 10 numbers via landline (PSTN). In the event of an alarm, the respective event text is sent to a maximum of 10 contacts. If one transmission path is disrupted, the second one is used.
Remote access, on-site interaction, mailbox: Messages can be retrieved or the device programmed via a call from anywhere. With the listen and speak mode (microphone/speaker), it is possible to listen and speak into the building. The mailbox forwards incoming SMS, for example, when the prepaid SIM card's balance has expired.
Stand-alone operation, 4 relay outputs: Through wired inputs, signals from other systems besides an alarm system can also be processed. Thus, other devices can be controlled via 4 relay outputs, for example, for home automation or industrial applications.
5. Abus Secvest Emergency Power Battery FUBT50000 7.4V / 2500 mAh
Replacement battery for the Secvest wireless alarm control panel (FUAA50xxx). The second battery extends the backup runtime from 12 to up to 24 hours. With the Secvest replacement battery, you can increase the backup runtime of the Secvest wireless alarm system from 12 to up to 24 hours. The battery can be easily and quickly inserted into its designated slot in the housing.
Size designation: other
Number of cells: 2
Type: Lithium
Nominal voltage: 7.4 V
Capacity: 2500 mAh
IEC designation: other
Other designation: other
Length: 64 mm
Height including poles: 21 mm
Width: 38.5 mm
Diameter: 38.5 mm
Battery pack: yes
Suitable for Ex area: no
Plastic housing: one
Suitable for fast charging: no
Weight: 90 g.
6. Abus PSTN/IP converter
Converts analog control center protocols into digital protocols and transmits them to control centers via 8 controllable wired inputs. Integrated GSM module. Double security: redundancy through Ethernet and GSM. The housing is monitored for tampering. The PSTN/IP converter transforms analog control center protocols into digital protocols and sends them to a control center. Supported protocols include VdS IP, CID, SIA DC09, among others. It also utilizes conventional wired inputs, making it possible to future-proof older, still analog control center connections. The housing features tamper monitoring and an LED display. Encryption of messages to the receiving control center is also possible. The AZWG10200 is ideal for continuing to connect ABUS Terxon systems to control centers. The following digital protocols are implemented: SIA DC-03, SIA DC-09, SIA DC-09 Encrypt, SIA DC-09 A.Ascii, SIA DC-09 A.Encrypt, CID DC-09 encrypted, VdS-IP 2465 demand-controlled, VdS-IP 2465 demand-controlled encrypted.
Dimensions: WxHxD mm. Number of voice messages: Type of inputs: Wired. Width: 150 mm. Gross weight: 0.338 kg. Inputs: Remote access: Yes. Height: 190 mm. Power consumption: 2.04 W. Length: 64 mm. Installation location: Surface-mounted. Net weight: 0.338 kg. Backup power supply: No. Tamper monitoring: Yes. DC power supply: 12 V.
Scope of delivery: 1 dialing device, 1 network cable, 1 antenna, 1 mounting material, 1 safety instructions, 1 QuickGuide AZWG10200.
7. Abus Seco BUS radio extension BUMO60030 (Seco radio) BUMO60030
8. Abus Secvest wireless outdoor motion detector
ABUS FUBW50022 Secvest Wireless Outdoor Motion Detector
Robust detector for reliable motion detection. The Secvest wireless outdoor motion detector responds to all types of heat movement and reliably reports this to the Secvest alarm control panel. Used as a perimeter warning, it monitors the exterior of your home. As soon as someone enters the monitored area of the detector, a warning can be issued through the outdoor siren, potentially deterring intruders before they can enter.
Flexible application. The integrated PIR elements can be swiveled 180° and tilted 90°, allowing the detector to be installed in almost any location. The detection range – depending on the installation height – is up to 30 meters.
- Outdoor motion detector for perimeter monitoring
- Integratable into alarm and video surveillance systems
- Dual-PIR element
- Detection range up to 30 m
- Protection class IP55
- End customer
Note: According to the manufacturer, this product should only be installed by qualified professionals.
9. Abus Terxon MX 8-Zone Wire Extension
8-Zone Wired Expansion for Abus Terxon MX Control Panel
The Terxon MX 8-Zone Wired Expansion is an expansion module for the Terxon MX. With this module, you can expand your alarm system by up to 8 wired alarm zones.
The 8-Zone Wired Expansion is connected to the main board of the Terxon MX via a 4-wire bus wiring. You can connect up to 3 expansion modules (wireless or wired) to your existing alarm control panel. This allows the Terxon MX to be expanded to a total of 32 zones.
The additional alarm zones are freely programmable and tamper-monitored. The type of wiring – NC or DEOL – is up to you, but it must be the same for all zones. You assign the zones of the expansion modules (9 to 16, 17 to 24, and 25 to 32) via a jumper on the board.
- 8-Zone Wired Expansion for Terxon MX
- Easy connection with 4-wire bus
- Allows individual identification of detectors (recommended in security-sensitive areas)
- Enables clustering into logical areas
- Minimizes wiring effort
Note: According to the manufacturer, this product should only be installed by qualified partners.
10. Abus Frame for 1 module for flush mounting
Total modular: The video door intercom system
See who's at the door, talk to them, and open the door. Modular and easily adaptable to any building – with the appropriate installation frame.
Discreetly flush-mounted: Your ModuVis installation
When installing ModuVis modules (video module, doorbell button module, etc.), you can choose between surface-mounted and flush-mounted installation. You can also choose between a single-frame (for 1 module), double-frame, and triple-frame (for 3 modules). This installation frame is suitable for flush mounting of 1 module.
Totally modular, extensively expandable
A clear advantage: Depending on the number of apartments or living areas and the local requirements, modules can simply be added to the system, such as an info module with a nameplate, doorbell button module, or keypad for keyless access via PIN code. If only the video module is installed and no expansion is planned, the single-frame is the first choice. If additional modules are planned but not installed during the initial setup, a larger frame (double or triple) can be selected, and the unoccupied part can be covered with a blank module (blind cover).
