Hanging hooks and masonry anchors for SAH

• Hanging hooks
• Must be screwed in at least 40 mm into the masonry anchor
• Suitable hook driver for cordless screwdrivers
• Galvanized steel
• Masonry anchor ø 8 x 40 mm
• For use in solid bricks, calcium silicate bricks, concrete, or clinker bricks
• For other wall materials, commercially available special fastening materials must be used
• White plastic

Set consists of: 100 hanging hooks and 100 masonry anchors

Notes on the load capacity of cabinet hangers and accessories:

• The following principles regarding load capacity must be observed for cabinet hangers and accessories:
• Both the furniture construction and the material and manufacturing quality of the furniture are beyond our control.
• We also have no influence over the nature of the wall materials.
• The offered hanging hooks in conjunction with anchors are intended for use in solid bricks, calcium silicate bricks, concrete, or clinker bricks. A hole with a diameter of 8 mm must be drilled into the solid stone material, into which the plastic anchor is flush driven. The minimum hook screw-in depth corresponds to the hook length minus 10 mm.
• For fastening to other wall materials, the respective commercially available special fastening elements must be used.
• Anchors and screws must be compatible. Anchor screws must not be replaced with standard particle board screws.
• Fastening of hanging rails:
• With 2 special screws Ø 5.5 x 50 mm in the area of each cabinet hanger
• For a cabinet width of 900 mm or more, an additional special screw Ø 5.5 x 50 mm must be placed centrally behind each cabinet (Type A, Type B, and Type H).
• Add-ons such as end shelves are not permitted without separate cabinet hanging.
• It is the responsibility of the furniture manufacturer or dealer to ensure that the furniture placed on the market meets the requirements of EN 14749.