Glen Dimplex SEE well pump UWE 200-95

Manufacturer: Glen Dimplex SEE
Designation: High-efficiency well pump
Type: UWE 200-95
Pump casing material: Stainless steel
Pump casing material grade: Stainless steel 304 (1.4301)
Impeller material: Other
Flow rate (BEP): 3.2 m³/h
Head at flow rate (BEP): 26 kPa
Max. head: 26 m
Max. working pressure: 2.8 bar
Electrical connection: Cable
Cable length: 15 m
Rated voltage: 380-415 V
Number of phases: 3
Frequency: 50 Hz
Rated current: 0.52 A
Motor output power (P2): 0.25 kW
Insulation class according to IEC: B
Speed: 2900 1/min
Speed control motor: External (not included)
Type of speed control: Regulated in fixed steps
Medium temperature (continuous operation): 3-40 °C
Connection outlet side: Female thread (metric)
Nominal diameter, connection outlet side: 1 1/4 inch (32)
Connection standard outlet side: EN 1092-2
With check valve: Yes
Diameter pump: 98 mm
Length pump and motor: 513 mm
Immersion depth: 0.22 m
Min. borehole diameter: 125 mm
Max. sand content: 0 g/m³
Weight: 10 kg
Protection class (IP): IP68

Glen Dimplex SEE well pump UWE 200-95: More details
High-efficiency well pump with stainless steel housing for low energy consumption (motor power consumption 0.3 kW) and high operating figures. Can be used in the cold water circuit (primary circuit) of a water/water heat pump up to 10 kW, max. delivery head 26 m, operating temperature range +3 °C to +40 °C, max. diameter of the well pump 100 mm, pressure range +3 °C to +40 °C. Diameter of well pump 100 mm, pressure connection Rp 1, mains connection, 3/PE ~400 V, 50 Hz, including connection cable 4 x 1.5 mm² (length 15 m), protection class IP 68. Delivery head max. 11 m at a volume flow of 3.2 m³/h.