Danfoss Heating Mat DTCE-300 5750W

Manufacturer: Danfoss
Designation: Heating Mat 400V
Type: DTCE-300 5750W
With Carrier Mat: No
Heating Cable Fixation: Glued
Self-Adhesive: No
Connection Power: 5750 W
Power: 300 W/m²
Heating Cable Load: 30 W/m
Number of Cold Leads: 1
Length of Cold Leads: 10000 mm
Suitable for Wet Rooms: Yes
Suitable as Outdoor Heating: Yes
Suitable as Roof Heating: No
Area: 19 m²
Length: 25400 mm
Width: 750 mm
Thickness: 7 mm
With Controller: No
With Room Thermostat: No
With Floor Temperature Sensor: No

Danfoss Heating Mat DTCE-300 5750W: Additional Details
Ready-to-install heating mat with a connection cable suitable for installation in reinforced concrete, screed, or sand bed. With additional protective sheathing for use with RCD protection. This heating mat system is particularly suitable for installation in angled and/or large areas, as the return of the second connection is eliminated. Including factory-installed waterproof connectors and a 10 m long cold lead, to be installed according to the installation instructions. Measurement of insulation and total resistances. Heating cable according to IEC 60800, voltage: 400 V, nominal limit temperature: 80°C, specific heating power: 300 W/m², resistance tolerance: +10% / -5%, minimum installation temperature: 5°C, minimum bending radius: 5 x dA, protection class: IP X7, area 19.0 m², 5750 W.