Danfoss Heating Mat DTCE-100 1200W

Manufacturer: Danfoss
Designation: Heating Mat 230V
Type: DTCE-100 1200W
With carrier mat: yes
Heating conductor fixation: glued
Self-adhesive: no
Connection power: 1200 W
Power: 100 W/m²
Heating conductor load: 7.5 W/m
Number of cold conductors: 1
Length of cold conductor: 6000 mm
Suitable for wet rooms: yes
Suitable as outdoor heating: no
Suitable as roof heating: no
Area: 12 m²
Length: 16000 mm
Width: 750 mm
Thickness: 7 mm
With controller: no
With room thermostat: no
With floor temperature sensor: no

Danfoss Heating Mat DTCE-100 1200W: additional details
Heating mat with a connection cable suitable for installation in or under the screed. Suitable for use in dry, damp, or wet rooms. Features additional protective sheathing for the use of RCD protection. This heating mat system is particularly suitable for installation in angled and/or large areas, as the return of the second connection is not required. Includes factory-installed waterproof connectors and a 6 m long cold conductor. Heating cable according to IEC 60800, voltage: 230 V, rated limit temperature: 80°C, specific heating output: 100 W/m², resistance tolerance: +10% / -5%, minimum installation temperature: 5°C, outer diameter: 7 mm, minimum bending radius: 5 x dA, protection class: IP X7, area 12.0 m², 0.75 x 16.0 m.