Best selling Weather station accessories from Technoline
On this page you’ll find a ranking of the best Weather station accessories from Technoline. To give you a quick overview, we’ve added the most important product details. This page always stays fresh and updates automatically.
1. Technoline Tx 35-It
Is your station not receiving outdoor temperature readings despite following the battery replacement instructions and/or performing a reset? Then your outdoor sensor may be defective. But no worries, you can now replace the outdoor sensor without necessarily having to invest in a new station. A proper smart home includes measuring temperature and humidity in every room. However, this can quickly drive up hardware costs. To build a JeeLink yourself, you will need an Arduino Nano and an RFM12B for 433/868 MHz. The TX 35-IT sensor is a significantly cheaper alternative. It is only recommended for true DIY enthusiasts and tech lovers.
2. Technoline TX 37 IT
The TX 37 IT from Technoline is a highly advanced thermal sensor designed for use with various weather stations. It offers wireless signal transmission with a maximum range of up to 100 meters, making it ideal for outdoor use. The sensor is powered by two AA batteries, ensuring easy handling and maintenance. With compact dimensions of 38 x 21 x 129 mm, the TX 37 IT is easy to install and integrate. It is compatible with several Technoline models, including the WS 9632, WS 8118, WS 8117, WS 9140, and WS 9130, highlighting its versatility. The sensor features a simple gray tone that blends harmoniously into various environments.
- Wireless signal transmission with a range of up to 100 m
- Operates on two AA batteries for easy maintenance
- Compatible with multiple Technoline weather stations
- Compact dimensions for flexible installation options.
3. Technoline Ma 10100
The temperature sensor continuously sends you the current temperatures in your rooms. With the help of the gateway (also included in the set) and the Mobile Alerts app, the temperature sensor transmits the current temperature to your smartphone, allowing you to check the temperatures at any time. The unique feature of this system is that you can set alarm thresholds within the app, and you will be immediately notified via push notification if these thresholds are exceeded or not met. Note: only functional with the gateway.
- Accurate temperature measurement of indoor or outdoor temperatures
- Access to measurement values via the app from your smartphone
- Notification via push message when set alarm thresholds are exceeded
- Customizable alarm values
- A history is available within the app.
4. Technoline Temp with probe/humidity Pro
The MA 10320 is an additional sensor for the Mobile Alerts system. It allows you to monitor temperature and humidity from your smartphone. In conjunction with the gateway and the "Mobile Alerts" app, you have the option to set individual alarm thresholds, triggering an immediate alert via push notification on your smartphone when these thresholds are exceeded or not met. Using the existing gateway and the installed "Mobile Alerts" app, temperature and humidity data are transmitted directly to your smartphone, enabling you to check the temperature and humidity of, for example, your terrarium at any time. Within the app, you can set alarm thresholds that will notify you on your phone when they are exceeded or not met. If the temperature or humidity rises or falls too drastically, you will be promptly alerted, allowing you to prevent significant damage. Additionally, the MA 10320 transmitter is compatible with Amazon's Alexa, so you can easily check the temperature and humidity levels at any time using an Echo device.
5. Technoline Rain sensor
The Technoline rain gauge MA 10650, as an extension to the Technoline basic set, is designed to monitor precipitation amounts. The battery life is approximately 2 years. The measurement range for precipitation extends from 0 mm/h to 300 mm/h, with a continuous measurement interval during rainfall.
6. Technoline Anemometer
The Pro-Series Wind Sensor MA 10660 is an essential component of the Mobile-Alerts home monitoring system, monitoring wind strength, wind direction, and gusts. Equipped with a solar panel, it eliminates the hassle of changing batteries. The sensor accurately captures every gust of wind and transmits the data to your smartphone every seven minutes. Within the app, the data can be analyzed in advanced graphs, and individual alarm thresholds can be set. To get started, a smartphone (with Android or iOS), a gateway, the Mobile-Alerts app, and an internet connection are required. Historical measurements are displayed weekly, including graphical representations of wind speed and direction.
7. Technoline MA 10350, Temperature / Humidity / Water sensor, 1.5m cable
The MA10350 is a sensor for monitoring indoor or outdoor temperatures, humidity, and water detection. The sensor must be installed protected from direct rain and sunlight. Length of the probe cable: 1.5 m.
Weather station accessories
EUR42,63
Technoline MA 10350, Temperature / Humidity / Water sensor, 1.5m cable
8. Technoline Thermo/Hygro Sensor Mobile Ale
The sensor permanently monitors the temperature and humidity and immediately reports faults to your smartphone if the preset alarm limits are exceeded. The MA 10241 is an additional sensor for the Mobile Alerts home monitoring system and belongs to the sensors from the Pro Series. All sensors of the Professional Series have a comprehensive graphical display of the sensor data and an indication of minimum and maximum values. With MOBILE - ALERTS always a good feeling! Worldwide query of the data via smartphone + app. A quick glance at your smartphone is enough to get certainty about the status of your home. At any time, from anywhere.
9. Technoline TX29DTH-IT
Your station is not receiving an outdoor temperature despite changing the battery according to the instructions and/or resetting? Then your outdoor transmitter may be faulty. But no problem, you can now replace the transmitter without necessarily having to invest in a station. Please note the compatibility of the sensor with the stations. A proper smart home includes measuring the temperature and humidity in every room. However, this can quickly cause hardware costs to skyrocket. To build your own JeeLink, you need an Arduino Nano and an RFM12B for 433/868 MHz. The TX 29 DTH-IT is an alternative sensor system. Only recommended for real tinkerers and technology enthusiasts.
10. Technoline Ma 10200
The MA 10200 is an additional sensor for the Mobile Alerts system. It allows you to monitor temperature and humidity from your smartphone. In conjunction with the gateway and the "Mobile Alerts" app, you have the option to set individual alarm thresholds. If these thresholds are exceeded or not reached, you will receive an immediate alert via push notification on your smartphone. With the existing gateway and the installed "Mobile Alerts" app, temperature and humidity data is transmitted directly to your smartphone, allowing you to check the temperature and humidity of, for example, your terrarium at any time. Within the app, you can set alarm thresholds, and if these are exceeded or not reached, an alert will be sent to your phone. If the temperature or humidity rises or falls too drastically, you will be notified immediately, helping you to prevent significant damage. Additionally, the MA 10200 transmitter is compatible with Amazon's Alexa, so you can easily check the temperature and humidity levels at any time through an Echo device.
Product order
See all products