Best selling Network antennas
This page always stays fresh and updates automatically.
1. Ubiquiti Panel antenna
Panel antenna UACC-UK-Ultra-Panel-Antenna.
2. Netgear 6000451-10000S
The omnidirectional MIMO antenna increases performance indoors or in the fringe areas of the network. The antenna enhances and boosts speed in buildings, vehicles, or remote locations with poor network coverage. Since no software is required, installation is quick and straightforward.
What our customers think
Pro
- Power amplification on the Nighthawk M1
- Power amplification on my Hawk M1 is great
- It is black
Contra
- Suction cups do not hold
- Cable too short 1 metre is too short
3. Poynting XPOL-2-5G
The XPOL-2-5G is Poynting's V3 of the third generation of this very popular cross-polarised (XPOL) mobile radio band 2x2 MIMO antenna. The antenna housing looks virtually the same as the second generation V2, but has been completely redesigned inside. Poynting has utilised advanced metamaterial technology, using artificial magnetic conductors (AMC) and a patent-pending radiator configuration that demonstrates exceptional improvements in bandwidth and gain. The radiation patterns of this antenna are exceptionally well controlled, further enhancing the antenna's performance.
The XPOL-2-5G antenna includes the 3400 - 3800 MHz bands not previously covered by the V2 and is suitable for 2G, 3G, 4G and 5G. This antenna performs exceptionally well in the following frequency bands: 698 - 960 MHz, 1700 - 2170 MHz, 2300 - 2700 MHz and 3400 - 3800 MHz. In addition, the gain at 1700 MHz and 2.7 GHz over the same frequency bands is about 3 dB higher than with V2. The V2 antenna already outperformed most competitors in these bands, so this significant improvement in gain demonstrates the benefits of the advanced materials and radiator design.
So if it was a car, Poynting installed a technology engine that produces twice the power under the bonnet - it may look the same, but just wait until you switch on the ignition.
Aerial cable not included.
4. Allnet Antenna 868MHz 7.3dbi N-Female Omnidirectional/Round beam ANT-868-7
The ALLNET antenna 868MHz 7.3dBi N-Female is a powerful omnidirectional antenna specifically designed for use in the frequency range of 860 to 880 MHz. With an antenna gain of 7.3 dBi, it offers excellent signal strength and range, making it ideal for applications in the Internet of Things (IoT), LoRa networks, and Helium miners. The antenna is suitable for outdoor use and can be mounted on both walls and poles. It is robustly constructed to withstand extreme weather conditions, with a maximum wind load of 180 km/h and an operating temperature range of -40 °C to +60 °C. The connection is made via an N-type female connector, allowing for easy integration into existing systems. This antenna is a reliable choice for anyone needing a stable and high-performance connection.
- Omnidirectional radiation with a radiation pattern of H360 V20
- N-type female connector for easy integration
- Maximum wind load of 180 km/h for high stability
- Operating temperature range of -40 °C to +60 °C
- Suitable for LoRa, Helium networks, and IoT applications.
Network antenna
EUR62,90
Allnet Antenna 868MHz 7.3dbi N-Female Omnidirectional/Round beam ANT-868-7
Wi-Fi
5. Poynting 43081 - A-PUCK-0002-V2-01-W white, MIMO 5GLTE IoT vehicle antenna, 2x 5GLTE 698-
The new PUCK series from Poynting offers a low-profile antenna designed for use in the IoT/M2M, smart meter, smart utilities, transport, shipping, and agriculture markets. The PUCK-2 consists of a 2-in-1 antenna system housed in a single enclosure and features 2x2 MIMO 5G/LTE antennas that provide broadband coverage from 617 to 6000 MHz, covering current LTE/4G and 5G bands for future-proof implementation. The ultra-broadband performance of the mobile antennas allows for use with various operators and technologies and is ready for future mobile technologies up to 6 GHz for 5G applications. The PUCK outperforms many competitors due to the careful design of this high-performance antenna. The radiation patterns of all radiating elements offer an excellent balance between omnidirectional characteristics, pattern diversity, and good radiation properties at the desired height, which is often overlooked in such a small antenna. Despite its compact size, this antenna delivers outstanding performance, especially in the higher frequency bands where performance is critical for 5G and LTE throughput and connection stability. This antenna is designed to connect both 5G/LTE ports to the router to ensure optimal performance. Please consider other derivatives of the PUCK series that may be better suited for a SISO application.
Highlights
- 2-in-1 5G high-performance multi-frequency antenna
- Antenna supports Private 5G/5G/4G/3G/2G/Wi-Fi/LoRa/Bluetooth
- 5G (2x2 MIMO)
- Ultra-broadband coverage from 617 - 6000 MHz for mobile networks
- Robust, vandal-resistant, and waterproof (IP 69K)
- Ideal for transport, shipping, and IoT/M2M applications
- Ultra-versatile mounting options for easy installation
Delivery includes
- Antenna (2m cable permanently installed)
- Mounting kit.
Network antenna
EUR76,90
Poynting 43081 - A-PUCK-0002-V2-01-W white, MIMO 5GLTE IoT vehicle antenna, 2x 5GLTE 698-
2G, 3G, 5G, Lora
6. Poynting Antennas - 5G/LTE - Automotive/Marine - A-MIMO-0004-V1-17-B - Wi-Fi - black - SMA (M) - 3.56d
Poynting A-MIMO-0004-V1-17-B 4x 4G/5G/LTE 2x WLAN 1x GPS Combo Antenna, IP69 Outdoor, 21dBi max. 617 - 7200MHz, 2m SMA(m), black The MIMO-4-17 is a 7-in-1 high-performance multi-frequency antenna in a single housing. The antenna features four cellular antennas, two Wi-Fi antennas, and one GPS/GLONASS antenna. The four cellular MIMO antennas provide broadband coverage from 617 to 6000 MHz, thus covering the current LTE/4G and 5G bands for future-proof implementation. The ultra-broadband performance of the cellular antennas allows for use with various operators and technologies and is ready for future mobile technologies up to 6 GHz for 5G applications as well as for Wi-Fi applications from 5 to 6 GHz. The antenna also includes two dual-band Wi-Fi antennas that simultaneously provide 2.4 GHz and 5 to 7.2 GHz on each antenna for 2x2 MIMO capability. The MIMO-4-17 outperforms most competitors, as significant attention was paid to the design during the development of this high-performance antenna. The radiation patterns of all radiating elements offer an excellent balance between omnidirectionality, pattern diversity, and good radiation characteristics at the desired height. This is an important criterion for the transport and marine market for which the antenna was specifically designed. Main applications include utility/industrial vehicles, shipping, M2M, and other IoT systems that utilize a wide range of radio technologies while being future-proof across the broad frequency band. Delivery includes: - Antenna in black (2m cable permanently installed) - Ø25 threaded stud (up to 70 mm clamping thickness), mast/wall mounting angle, and adhesive for surface mounting - 2 x RP-SMA(m) to SMA(f) adapters Highlights: - 7-in-1 high-performance multi-frequency vehicle antenna - Ultra-broadband coverage from 617 to 6000 MHz for...
Network antenna
−6%
EUR349,– was EUR369,55
Poynting Antennas - 5G/LTE - Automotive/Marine - A-MIMO-0004-V1-17-B - Wi-Fi - black - SMA (M) - 3.56d
4G, GPS, Wi-Fi
7. Teltonika 5G Combi MIMO mobile roof antenna SMA
The Teltonika PR1KC647 antenna is designed for robust connectivity and supports both LTE and 5G networks. It features an IP67 and IP69K rating, ensuring protection against dust and water ingress, making it ideal for various environments. With omnidirectional radiation and a gain of 4.7 dBi, this antenna enhances signal reception and transmission across a frequency range of 600 to 6000 MHz, ensuring reliable mobile communication. The linear polarization and MIMO technology improve performance, especially under challenging conditions. This antenna is suitable for roof or screw mounting, is versatile and easy to install, providing users with efficient wireless communication options.
8. Poynting Antennas - 5G/LTE - Automotive/Marine - A-MIMO-0004-V1-04-B - black - SMA (M) - 3.56dBi - 2M
Poynting A-MIMO-0004-V1-04-B 4x4 MIMO 4G/5G/LTE 4-in-1 Transport/Automotive IoT Antenna, IP69 Outdoor, 6dBi max. 617 - 6000MHz, 2m SMA(m), black
The MIMO-4-4 is a high-performance 4-in-1 multi-frequency antenna featuring four cellular antennas housed in a single enclosure. The four cellular MIMO antennas provide broadband coverage from 617 to 6000 MHz, thus covering the current LTE/4G and 5G bands for a future-proof implementation. The ultra-broadband performance of the cellular antennas allows for use with various operators and technologies, and is ready for future mobile technologies up to 6 GHz for 5G applications.
The MIMO-4-4 outperforms most competitors, as special attention was given to performance during the development of this high-performance antenna. The radiation patterns of all radiating elements offer an excellent balance between omnidirectionality, diversity of patterns, and good radiation characteristics at the desired height. This is a crucial criterion for the transport and marine market for which the antenna was specifically designed. Main applications include commercial/industrial vehicles, shipping, M2M, and other IoT systems that utilize a wide range of radio technologies while being future-proof across the broad frequency band.
Delivery includes:
- Antenna in black
- M4 x 10mm flat head screws made of stainless steel
- 37mm and 85mm threaded studs
- 55mm internal threaded stud
- Magnetic foot adapter
- Mast/wall mounting bracket
- Locknut
- Stud/adhesive mounting foam seal
- Grip extensions
- SMA(F)-RP-SMA(M) adapter
- Pipe clamp
- Screws for wall mounting
- Magnetic mount foam seal
Highlights:
- Ultra-broadband operation from 617 to 6000 MHz for cellular applications
- Features 4 x...
Network antenna
EUR204,58
Poynting Antennas - 5G/LTE - Automotive/Marine - A-MIMO-0004-V1-04-B - black - SMA (M) - 3.56dBi - 2M
2G, 3G, 4G, 5G
9. Panorama Antennas USL 5G/LTE antenna
The antenna features a round radiation pattern and supports 5G, 4G/LTE, 3G, and 2G standards. With its robust and weatherproof design, the omnidirectional antenna is suitable for both indoor and outdoor use.
Specifications: The omnidirectional antenna has a gain of 2.5 to 4 dBi and can be used in the frequency range of 800 MHz to 3.8 GHz. It is equipped with two SMA connectors, making it compatible with many commercially available UMTS routers. Additionally, the antenna offers MiMo and diversity across mobile bands and features a 90-degree cross-polarization.
Application possibilities: The antenna allows you to enhance the reception of wireless communication networks in areas where only a weak signal is available. This results in a significant increase in performance for data and voice communication.
10. Teltonika 5G Mobile SMA Antenna
Teltonika 5G Mobile SMA Antenna (PR1US540).
Product order
See all products