HyperX Fury
2 x 16GB, 2133 MHz, DDR4-RAM, DIMM
Questions about HyperX Fury
What would you like to know?
0 questions and answers
Helpful answer
Is the RAM being used to its full capacity? Why don't you check this in the task manager in the various applications you are using?
So if the question is whether they also run under Windows, they do
what are you using this ram for? mainboard? ever checked how much ram is supported? maybe if it is technically possible plug in 1 or 2 16gb modules for expandability instead of using 4x 4g ram
8+8=16 yes did you skip maths at school?
Yes, this should normally also be compatible. The difference is that the HX421C14FBK2/16 is single-rank memory and the HX421C14FB2K2/16 is dual-rank memory. Attached is an interesting discussion about this: https://www.computerbase.de/forum/showthread.php?t=1465445 PS: For which motherboard do you want to use the RAM?
Hello Marc, This service is not offered by digitec. Depending on the case, you would also have to be careful when installing it yourself. Sometimes such fixed PCs are also sealed, in which case the manufacturer's warranty "COULD" expire as soon as the case is opened. A service centre may be able to offer this service (e.g. http://www.littlebit.ch/), so that it is then sealed cleanly again. Greets
Please contact the customer service department in this regard. The question function is basically there to ask other customers about the characteristics of the product in question. However, if by "almost new" you mean a used/returned item, it is normal for the warranty period to be 12 months.
Helpful answer
The manufacturer's number provides information. HX421C14FB2/8 vs. HX421C14FB/8 The difference is the 2 after the FB. The one with the 2 after the FB is probably the newer version of the same bolt. According to the manufacturer, HX421C14FB/8 is discontinued. It is better to take the newer version. It is certainly more compatible with current hardware.
if they are supported by your mainboard (pay attention to ram compatibility), there should certainly be no objections.
Helpful answer
Hello, I have installed the strips on a Z270e with the Z270f it is also compatible. It's a lot of fun ;-)
Helpful answer
In general, the computer is not bad, but as already mentioned, you won't get far with the graphics card. It also depends on what kind of games you play. The CPU isn't exactly top-notch either. You're better equipped with an i5. I wouldn't be too stingy with the mainboard either. I'd recommend getting a more expensive but better one, so that you'll still be in good hands in two years. MFG Rafael
Yes, the RAM should be compatible with that motherboard.
Ja sollte Kompatibel sein gemäss diesem Dokument vom Hersteller: https://media.kingston.com/pdfs/hx-product-memory-ddr4-amd-ryzen-and-hx-compatibility-us.pdf
Absolument :)
No, it could be true because it is 4 x16GB. So 64GB RAM!
Helpful answer
I'm sure it does! It's in the specifications. Even M.2 SSD memory! Such an expensive board must be able to cope with everything. Good luck!
Helpful answer
The P8Z77-V LX is designed for DDR3 RAM and has 48 fewer contacts than DDR4. It is therefore not compatible.
Yes, it is unbuffered and non ecc :) You can find this information in the specs. Where it says unbuffered, it would say ECC if it is ECC RAM.
30 of 34 questions