The soundbar is connected to the computer via USB cable or Bluetooth. For the USB connection, plug the USB cable supplied into the USB-C port on the soundbar and the USB-A plug into your PC. For Bluetooth, switch on the soundbar, press the multifunction button for 2 seconds until the LED flashes blue and select "Creative Stage SE" in the Bluetooth settings of your device. Step by step: 1. USB: Connect USB-C cable to the soundbar and USB-A to the PC → automatic detection (Windows) or manual selection in the system settings (macOS: Apple menu > System Preferences > Sound > Output). 2. Bluetooth: Switch on the soundbar, hold the multifunction button for 2 seconds → start Bluetooth pairing (flashing blue LED) → pair the device in your Bluetooth settings. Note: The remote control (according to the product data) is not mentioned in the official instructions - if available, use it to change the volume or source. If you have problems with USB detection, manually select the soundbar as the default output device in the Windows sound settings.

No it does not have a 3.5 mm jack socket It has a usb c audio in that turns into usb And a usb service

The Creative Stage SE soundbar can be connected to a TV, but the connection options and the automation of switching on have some limitations. ### Connection options - You can connect the soundbar to your TV via a USB-C to USB-A cable if the TV has a USB port that is suitable for audio output. However, this is not the case with all TVs. - Another option is to use Bluetooth 5.3 if your TV supports Bluetooth. However, you will need to manually switch the soundbar to Bluetooth mode and pair it with the TV. ### Automatic switch on - Unfortunately, the soundbar does not switch on automatically when the TV is switched on. You must switch on the soundbar manually either using the multifunctional button on the side of the soundbar or using the remote control and, if necessary, select the correct input mode (USB or Bluetooth). There is therefore no way to configure the soundbar so that it switches on automatically when the TV is switched on. You have to switch it on separately and adjust the input mode if necessary.