The Corsair Vengeance with the manufacturer number CMK32GX5M2E6000Z36 has a memory clock frequency of 6000 MHz.

Corsair Vengeance RAM (2 x 16GB, 6000 MHz, DDR5 RAM, DIMM) has no RGB bands. These memory modules are designed for performance and reliability, but they do not feature RGB lighting.

Amd is a cpu brand, exactly. However, this ram model was specialised for the amd cpus so that if you own one, you can also extract the best performance from the ram, so to speak. A compatibility check would have to be done. You can simply type your mainboard into a browser and open the official page and from there everything should be self-explanatory. In other words, it could theoretically work with an intel cpu, but not at full power. If you are looking for full performance, look for the same model or similar models that are "intel xmp ready". If you have any further questions, just reply to me.

2x 16Go

It should be 2 x 32 GB, as correctly guessed. Thank you very much for pointing this out. We will gladly forward this internally to the responsible department and hope that this will be adjusted in a timely manner.

Yes

Hi, I have installed it in the DXP 8800Plus. Runs like hell...

In this case, we will refer you to our digitec Assistant, which provides direct contact options so that you can be helped accordingly. https://www.digitec.ch/help

Yes, the Corsair Vengeance DDR5 RAM module (CMK32GX5M2E6000Z36) is equipped with a heatsink. The heatsink is permanently attached and is not intended to be removed.

I was able to do a search and yes, the RAMs are compatible with both the CPU and the motherboard.

Hello, It is indeed DDR5/DIMM. However, it's 2 x 16 GB and not 2 x 32 GB. We'll adjust this as soon as possible!

Terramaster f4-424 work with a Corsair Vengeance 32GB, 4800 MHz, DDR5-RAM, SO-DIMM

These DDR5 RAM modules are generally compatible with AMD motherboards as they support the XMP and EXPO profiles, which are optimised for AMD and Intel. However, it is important to check the specific motherboard compatibility as not all motherboards support all RAM configurations. The modules should work with AMD 600 Series motherboards as they are optimised for DDR5.

Unfortunately, we do not have a field for a lifetime guarantee and can only provide a maximum of 30 years, hence this funny statement.

Corsair's "Vengeance (2 x 32GB, 4800 MHz, DDR5 RAM, SO-DIMM)" RAM, with product code "CMSX64GX5M2A4800C40", is not specifically listed as compatible with the Minisforum UM690 Venus Series in the available sources. However, here are some points to consider: - The Minisforum UM690 Venus Series supports 4800MHz DDR5 memory in dual-channel configuration, which matches the Corsair Vengeance memory specification. - Compatibility often depends on the compatibility of the mother system and the exact specifications of the system. To confirm compatibility, it is recommended that you check the specifications of the Minisforum UM690's mother system and consult the manufacturer's documentation or contact Minisforum or Corsair technical support.

Yes, you can change the colour of the RGB lighting of the Corsair Vengeance RAM. This is done via the Corsair iCUE software. With iCUE, you can customise individual lighting effects, select different colours and effects and even configure the speed and direction of the lighting.

That depends on which versions you are comparing and what you want to use the RAM for: G.Skill Ripjaw (e.g. CL30, 6000 MHz): Better for gaming thanks to lower latency (CL). Corsair Vengeance (CL36, 6400 MHz): Better for tasks with large amounts of data, as the higher MHz provides more bandwidth.

Hello, These strips are indeed RGB, as indicated in the product data sheet.

I don't use them myself were for a gamer PC I built.

Yes

Yes, I have also used this for AMD builds. But the safest way is to use RAMs according to the manufacturer's compatibility list.

The RAM is designed for Intel XMP. According to my information, the AMD Expo version is only available in black: Corsair Vengeance RGB.

EDIT: The RAM is designed for Intel XMP.

Thank you for pointing this out, I have just reported the misleading information.

Thank you very much for letting us know. We will be happy to pass this on internally to the relevant department and hope that this will be checked promptly.

According to our information, they are expected to be delivered again in mid-February.

Did you insert the memories into the second and fourth ddr5 slots correctly? They should be 100% compatible, because if they are not, you cannot insert them. If it doesn't work in the second and fourth ddr5 slots there might be a defect in the memory probably.

The CMH64GX5M2B6000C30 is for Intel. The CMH64GX5M2B6000Z30 is for AMD

Yes I can confirm it is the amd expo version.