Order-specific, non-cancellable. Product information: The shielded Cat.6A RJ45 patch cable ensures excellent performance for 10 Gigabit Ethernet applications. The molded boot impresses with its slim design, making it easier to plug in in tight spaces. Cross-section 4 x 2 x AWG26/7. Molded strain relief, slim design. Length marking on the boot. Product features: Category 6A (TIA). Connector type connection 1: RJ45 8(8). Connector type connection 2: RJ45 8(8). Connector type: RJ45. Standard: yellow. Contacts: gold-plated. Pin assignment: 1:1 assignment according to TIA/EIA 568B. Design: shielded. Length marking: yes. Strain relief molded. Color of strain relief: gray. Latch lever protection: yes. Plug cycles: 750. Bending radius: > 32.5 mm. Shield contact: point shield contact. Raw cable: Cat.7. Cable structure: S/FTP. Cable construction: 4x2 AWG cross-section/strands per conductor: 26/7. Conductor material: copper. Silicone-free: yes. Jacket material: LSZH. Jacket color: gray. Cable print: Cat.7 raw cable S/FTP 4x2xAWG26/7 PIMF 600MHz ISO/IEC 11801 and EN50173-1 TIA/EIA 568B-2.1. Halogen-free. 10 Gigabit. Outer diameter of the cable: 6.5 mm. Flame retardant according to IEC60332-1. Halogen-free according to IEC60754-2. Low smoke according to IEC61034. Temperature range: -20 to 60 °C. Impedance: 100 ± 5 Ω. DC conductor resistance: 146 Ω/km. Loop resistance: 292 Ω/km. Resistance asymmetry: 5%. Insulation resistance: 10 MΩ. Contact resistance: 30 mΩ. Test voltage: 1000 V DC, 1 min. Conductor/conductor and conductor/shield. PoE class: PoE according to IEEE802.3af, PoE+ according to IEEE802.3at, 4P PoE according to IEEE802.3bt. Bandwidth: 500 MHz. Transmission: 10 Gbit. Connector: IEC 60603-7-51.