Residual-current device
EUR136,59
Hager Helicopter 3 + N AC Switch B 10A 0.03A Type A 6kA Type RCBO (ADZ310D)
Best selling Residual-current devices
Here's a ranking of the best products in this category. To give you a quick overview, we've also added some key information about the products.
1. Hager Helicopter 3 + N AC Switch B 10A 0.03A Type A 6kA Type RCBO (ADZ310D)
Residual current circuit breaker 3X 1PN 6kA B-10A 30mA Type QuickConnect. Residual current circuit breaker according to DIN EN61009-1 VDE 0664-20 with a single-pole circuit breaker for 230V AC circuits and a residual current protection circuit in a compact housing. QuickConnect terminal according to DIN EN 60898-1 VDE 0641-11, with a load capacity of up to 16 A at the output and up to 63 A at the input, blue test button, and residual current indicator. Easy individual removal from the phase rail connection. Suitable for retrofitting additional devices. Labeling option directly on the device. ADZ310D.
2. Schneider Electric Acti9 iMX tripping unit 100-415VAC
Range: Acti 9
Series: iMX
Type: Shunt release
Control voltage: 100 to 415 V AC, 110 to 130 V DC
Auxiliary contacts: Auxiliary electrical components are combined with iC60 circuit breakers, iID residual current circuit breakers, iSW-NA remotely tripped disconnect switches, RCA remote controls, and ARA automatic make contacts. They provide trip or remote indication of their position (open/closed/tripped) in the event of a fault.
Tripping auxiliary components:
- iMN: Undervoltage release
- iMNs: Undervoltage release with delay
- iMNx: Undervoltage release, independent of supply voltage
- iMX: Shunt release
- IMX + OF: Shunt release with NC/NO contact
Indicator auxiliary components:
- iOF: Normally closed/normally open contact
- iSD: Fault indication contact
- IOF/SD + OF: Normally closed/normally open contact and switchable OF or SD contact.
3. Hager CDA440D
Hager RCD CDA440D
Manufacturer: Hager
Designation: 4-pole RCD 40A/30mA, 6kA
Type: CDA440D
Number of poles: 4
Rated voltage: 400 V
Rated current: 40 A
Rated residual current: 0.03 A
Rated insulation voltage Ui: 500 V
Rated impulse voltage withstand Uimp: 4 kV
Power loss: 6.5 W
Mounting type: DIN rail
Residual current type: A
Selective type: no
Time-delayed type: no
Short-circuit strength (Icw): 6 kA
Surge current strength: 0.25 kA
Voltage type: AC
With locking device: yes
Frequency: 50 Hz
Additional devices possible: yes
Protection class (IP): IP20
Width in division units: 4
Installation depth: 70 mm
Ambient temperature during operation: -25..40 °C
Degree of pollution: 2
Connectable conductor cross-section multi-stranded: 1..16 mm²
Connectable conductor cross-section single-stranded: 1..25 mm²
RAL number (similar): 7005
Explosion-proof: no
Hager RCD CDA440D: additional details
4-pole residual current circuit breaker 6kA 40A 30mA Type A. Residual current circuit breaker (RCD) according to DIN EN 61008-1 (VDE 0664-10), DIN EN 61008-2-1 (VDE 0664-11) with Bi-Connect terminals at the bottom, external blue test button, and residual current indicator. Suitable for retrofitting additional devices. Connection terminals with wire insertion protection, labeling option directly on the device.
4. Hager CEC425J
The Hager CEC425J is a residual current protection block designed to protect electrical systems from hazardous fault currents. This protective switch is an essential component in electrical installations, as it helps minimize the risk of electric shocks and fires. With a high rated insulation voltage of 400 volts and a rated current of 25 amperes, the CEC425J offers a reliable solution for various applications. The residual current protection block is designed for use in alternating current systems and features a pole count of 4, making it versatile. Its compact design allows for easy integration into existing switch cabinets and installations.
- Rated fault current of 0.1 A for enhanced safety
- Fault current of 100 mA to prevent overloads
- Suitable for use in alternating current systems.
5. Hager HAG ADX420D FI-LS 4P 10kA B-20A 30mA A
Residual current circuit breaker 4P 10kA B-20A 30mA Type A. Residual current circuit breaker according to DIN EN 61009-1 VDE 0664-20 with a 4-pole circuit breaker for 400 three-phase circuits and a residual current protection circuit in a compact housing, blue test button, and residual current indicator. Easy single removal from the phase rail connection. Suitable for retrofitting additional devices. Labeling option directly on the device. ADX420D.
6. Hager ADZ316D
Residual current circuit breaker according to DIN VDE 0664-20 / EN61009-1 with 3 x 1-pole miniature circuit breakers for 230 V AC circuits and a residual current circuit breaker in a compact housing. QuickConnect connection according to DIN EN 60898-1, VDE 0641-11, for supply lines up to 16 A and for supply lines up to 63 A, touch protection according to IP2x DIN VDE 0106 Part 100, blue test button and residual current indicator. Easy individual removal from the phase busbar system. With VDE symbol. Suitable for retrofitting additional devices. Labeling option directly on the device.
7. Schneider Electric M9R81225 M9 GFP 2P 25A 26MA TYPE A-SI 120/240V circuit breaker
The M9R81225 M9 GFP 2P 25A 26MA Type A-SI 120/240V residual current circuit breaker from Schneider Electric is a highly advanced residual current device designed for use in various electrical applications. This circuit breaker provides reliable protection against electric shocks from direct and indirect contact, as well as effective protection for electrical installations in the event of insulation faults. With a rated current of 25A and an operating voltage of 120-240V, this circuit breaker is ideal for use in damp or aggressive environments. The tripping unit technology is based on differential current, ensuring high immunity to transient leakage currents. The M9R81225 complies with relevant standards, including IEC/EN 61008-1 and UL 1053, providing high safety and reliability in application.
- Two-pole residual current circuit breaker with 25A rated current
- Type A-SI for enhanced safety in damp environments
- High electrical immunity to transient leakage currents
- Complies with international standards such as IEC/EN 61008-1 and UL 1053
- Suitable for use in aggressive environments.
Residual-current device
−30%
EUR139,– was EUR199,96
Schneider Electric M9R81225 M9 GFP 2P 25A 26MA TYPE A-SI 120/240V circuit breaker
8. Schneider Electric Acti9 iC60N MCB 1 Pole 1A Curve B
Acti 9 iC60N circuit breaker, 6kA (IEC/EN 60898-1), 50kA (IEC/EN 60947-2). Single-pole, rated current 1A, B-characteristic, operating voltage (Ue) 220-240V AC, insulation voltage (Ui) 500V AC. Double connection terminal for cables and pin busbar at the top and bottom of the device. Jump switching for wear-free operation of the contacts. Moving insulation cover. Operation of the DIN rail mounting element on the front side of the device for tool-free assembly and easy accessibility for the user. With mechanical front-facing fault indication (VisiTrip) to show tripping due to overload or short circuit. Safe contact indication (VisiSafe) of the circuit breaker, with a green indication ensuring voltage-free safety on the outgoing side. Terminals IP20, moving insulation cover. Double connection terminal from above or below. Easy removal of the individual device when the phase busbar is installed, thanks to the front-accessible mounting element. Technology of the tripping unit - thermomagnetic. Compatible with the residual current devices of the Acti 9 iID series as well as the Vigi iC60 residual current block. Additional snap-on auxiliary modules (optional) - indication of switching position, fault tripping, working current tripping, undervoltage tripping, overvoltage tripping. Colour shade RAL 9003. The iC60N circuit breaker complies with the following standards - IEC/EN 60898-1 and IEC/EN 60947-2. Furthermore, this series is VDE certified. Circuit breaker, automatic fuse, MCB, short circuit protection, overload protection, short circuit.
9. Doepke FISwitch DFS 4 02540,03A R
The Doepke FIS switch DFS 4 02540,03A R is a highly advanced residual current circuit breaker designed for use in electrical installations. This switch provides reliable protection against electrical fault currents and contributes to the safety of both people and equipment. With its independent network voltage design, it is sensitive to both alternating and pulsating direct fault currents. The switch is touch-safe and features a viewing window for labeling, which facilitates identification and documentation. The switching position indicator shows the neutral position in case of a fault, allowing for quick diagnosis. The DFS 4 is robustly constructed, frost-resistant down to -25°C, and offers a short-circuit breaking capacity of 10kA. The double terminal on both sides allows for easy and flexible installation with cables up to 50mm².
- Sensitive to alternating and pulsating direct fault currents
- Frost-resistant down to -25°C
- Switching position indicator with neutral position in case of a fault
- Surge resistance >1kA
- Double terminal on both sides for cables up to 50mm².
10. ABB FI/LS switch
FI/LS switches (RCBOs) provide personal and property protection as well as protection against electrically ignited fires in accordance with DIN VDE 0100-410 and DIN VDE 0100-530. They ensure the protection of single-phase circuits against overload and short-circuit currents, protection against sinusoidal alternating currents and pulsating currents with a smooth residual direct current component of up to 6 mA to earth. Additionally, they offer fault protection (protection against indirect contact), additional protection (with I∆n ≤ 30 mA), and fire protection (with I∆n ≤ 300 mA). They comply with the product standards IEC/EN 61009-1 (VDE 0664-20) and IEC/EN 61009-2-1 (VDE 0664-21). Areas of application include household, commercial, and industrial uses. The extensive range of accessories provides everything you need for your installation tasks. Numerous approvals make the DS201 suitable for worldwide use. Rated breaking capacity according to IEC/EN 61009 Icn = 6 kA. The RCBO DS201 A Type A is single-pole protected (LS) and double-pole switching.
Product order
See all products