Best selling Spackling paste from Fischer
On this page you'll find a ranking of the best Fischer products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Fischer High-performance mortar FIS V Plus 825 S
The fischer high-performance mortar FIS V Plus is the universal all-rounder for the highest demands. The styrene-free vinylester hybrid mortar, with its numerous fastening elements, is approved for fixings in cracked and uncracked concrete as well as masonry. The injection mortar is also used with the approved system components for reinforcement connections, the fischer facing renovation anchor VBS 8, the fischer weather shield anchor FWS II, and the distance mounting system TherMax. The shorter curing time of the FIS VW Plus High Speed variant allows for a rapid work progress even at low temperatures.
2. Fischer Installation mortar FIS VL
The Fischer mounting mortar 300 T is a 2-component injection system based on vinyl ester. The resin and hardener are mixed and activated only when dispensed from the static mixer. The mounting mortar can be processed particularly economically with a standard sealant gun. Opened cartridges can be reused with a new static mixer. The hybrid system offers many application possibilities for fastening in concrete and masonry with approved system components such as FIS A anchor rods, internal thread anchors, and injection anchor sleeves for both indoor and outdoor use.
Spackling paste
Quantity discount
EUR13,93 per piece for 2 units EUR46,43/1l
Fischer Installation mortar FIS VL
620 g
3. Fischer Fisc mounting bracket FIS VL 300 T HWK G 553657
Secure the contractor's case now with 20 cartridges of FIS VL 300 T mounting mortar and 40 static mixers. The fischer mounting mortar FIS VL 300 T is a 2-component injection system based on vinyl ester. The resin and hardener are mixed and activated only when extruded from the static mixer. The mounting mortar can be processed particularly economically with a standard sealant gun. Opened cartridges can be reused with a new static mixer. The hybrid system offers many application possibilities in both indoor and outdoor settings with approved system components such as FIS A anchor rods, internal thread anchors, and injection anchor sleeves for fixings in concrete and masonry.
Advantages: The FIS VL is approved for use in cracked concrete and masonry, achieving high load-bearing capacity in these materials. The injection mortar based on vinyl ester resin allows anchoring in water-filled drill holes in concrete, facilitating quick progress on the job. The temperature resistance of the FIS VL injection mortar from -40 °C to +120 °C ensures a solid load level even under high temperature requirements, thus increasing flexibility during processing. The FIS VL HIGH SPEED has a significantly shorter curing time than the FIS VL, allowing for quick processing even at low temperatures.
Applications: Steel construction, timber construction, railings, facades, stairs, steel brackets, machinery, masts, awnings, canopies, gates, brackets, pipelines, grids, satellite antennas.
Building materials: Approved for anchoring in concrete C20/25 to C50/60, cracked, lightweight concrete hollow blocks, high-hole bricks, sand-lime hollow bricks, sand-lime solid bricks, solid bricks, reinforcement connections, aerated concrete. Also suitable for: Concrete C12/15, concrete hollow blocks.
Functionality: The FIS VL is a 2-component injection mortar based on vinyl ester.
4. Fischer FIS 519125 Highbond special mortar FIS HB 345 S
The Fischer Highbond Special Mortar FIS HB 360 S is a system component of the Fischer Highbond System FHB II for anchoring in uncracked and cracked concrete. The cartridge contains a styrene-free vinyl ester mortar. The special mortar can be used with Fischer Highbond anchor rods FHB II-A S (standard) and FHB II-A L (long) made of galvanized steel, stainless steel, and highly corrosion-resistant steel. When tightening the hex nut, the cones of the anchor rod are pulled into the mortar shell, which is then tensioned against the borehole wall. With the Fischer Highbond System FHB II, railings, machines, and steel constructions are securely anchored both indoors and outdoors.
5. Fischer Injection mortar
The fischer universal mortar FIS V Zero, based on an innovative and special formulation, offers maximum safety for people and nature. The injection mortar meets the highest occupational safety requirements and is classified as label-free in accordance with the CLP Regulation. FIS V Zero is approved for fixings in cracked and non-cracked concrete, masonry and for post-installed reinforcement connections. Special applications, such as anchorages in water-filled boreholes, as well as installation at temperatures from -10 to 40°C, are also regulated in the approval and offer maximum flexibility under any weather conditions.
6. Fischer Installation mortar FIS VL 150 C
The Fischer mounting mortar 150 C is a 2-component injection system based on vinyl ester. The resin and hardener are mixed and activated only when extruded from the static mixer. The mounting mortar can be processed particularly economically with a standard sealant gun. Opened cartridges can be reused with a new static mixer. The hybrid system offers many application possibilities for fastening in concrete and masonry with approved system components such as FIS A anchor rods, internal thread anchors, and injection anchor sleeves for both indoor and outdoor use.
7. Fischer Mortar FIS VW Plus 300 T 563293 1 pc.
Top Features Injection mortar system with approvals for all relevant building materials. Highest load capacity for significantly increased safety. Short curing time. Usable down to -10 °C in the building material. Applicable in water-filled drill holes. Advantages The FIS V Plus injection mortars have a wide range of system approvals, for example in cracked and uncracked concrete, masonry, and for reinforcement connections. This makes FIS V Plus the universal injection mortar family with guaranteed safety for almost every application. The ETA approval for a service life of 100 years provides lasting safety for all applications. The approved use in water-filled drill holes allows for a wide range of applications, even under adverse environmental conditions. FIS VW Plus High Speed has a significantly shorter curing time than FIS V Plus, ensuring rapid progress even at low temperatures. The possible installation temperature range of -10° to 40 °C allows for year-round processing of the universal mortar. The extensive range of accessories is optimally coordinated with the FIS V Plus injection mortar family, enhancing the system's great flexibility and enabling a wide application field. Functionality FIS V Plus is a 2-component injection mortar based on vinylester hybrid. The resin and hardener are stored in two separate chambers and are only mixed and activated when extruded in the static mixer. The mortar is injected bubble-free from the bottom of the drill hole. The mortar fully bonds the fastening element to the drill hole wall and seals the drill hole. The injection cartridges can be processed quickly and with minimal effort using Fischer's dispensing devices. Open cartridges can be reused by changing the static mixer.
8. Fischer GOW furniture rescuer
Hinges can tear out and the door is hanging crooked. Good thing it's so easy to repair with the fischer furniture saver. Simply fill the hole with the furniture saver. The adhesive, almost like liquid wood, is the saviour for all household furniture. Thanks to its durability, it can be used flexibly to repair your cupboard, drawer or table. Due to its extreme hardness, the adhesive can be sanded without any problems. Once the adhesive has hardened, you can even screw it back in.
9. Fischer Multifunctional mortar FIS VS 300 T K
Fischer 502493 FIS multifunctional mortar.
10. Fischer Installation mortar FIS VL 150 C Set
The Fischer Montagemörtel 150 C Set is a 2-component injection system based on vinyl ester. The resin and hardener are mixed and activated only when extruded from the static mixer. The practical set includes plastic injection anchor sleeves. The mounting mortar can be processed particularly economically with a standard sealant gun. Opened cartridges can be reused with a new static mixer. The hybrid system offers many application possibilities for fastening in concrete and masonry, both indoors and outdoors, with approved system components such as FIS A anchor rods, internal thread anchors, and injection anchor sleeves.
