Best selling Mobile power distributors from Block
This page always stays fresh and updates automatically.
1. Block DIN rail power supply (DIN rail
All PowerVision switch-mode power supplies feature enormous power reserves thanks to the integrated Power Boost. This ensures a smooth start-up for consumers with high inrush currents. Additionally, the rapid tripping of cost-effective standard circuit breakers is now possible for the first time, thanks to Top Boost technology. The power supplies are equipped with internal input fuses. Using the devices without the usual pre-fuse for equipment protection saves money and space in your installation. The three-phase PowerVision switch-mode power supplies are available in three different configurations. The electronics monitor the level of input voltages, possible phase failures, frequency, and direction of the rotating field.
2. Block Electronic circuit breaker
A cost-effective alternative to traditional circuit breakers are protective switches with a thermomagnetic characteristic curve in the Economy Smart version. They ensure safe tripping even under high line resistances and are ideally suited for equipment and series machine construction. The electronic protective switch distributes the load current across multiple branches and reliably monitors them for overload and short circuit. It allows short-term current spikes, such as those caused by high inrush currents; however, branches with prolonged overload are disconnected. This is ensured even on high-resistance lines and in the case of "slow" short circuits. The rated current for each output can be individually set using a selector switch. If the rated current is exceeded, the output is automatically switched off after a defined tripping time and can be reactivated after a short wait (thermal relaxation) using a button or remote reset. The button also serves for manual switching of the output. The status of the output is indicated by a multi-colored LED.
3. Block PC-0648-400-0 Redundancy module 40A Number of outputs: 1 x
Redundancy module for decoupling two power supplies when building a fail-safe supply system. For machines and systems that have high demands on operational safety.
4. Block PC-0724-800-2 Electronic circuit breaker
An economical alternative to traditional circuit breakers are protective switches with a thermal-magnetic characteristic curve in the Economy Smart version. They ensure safe tripping even with high line resistances and are ideally suited for device and series machine construction. The electronic protective switch distributes the load current across multiple branches and reliably monitors them for overload and short circuit. It allows short-term current peaks, such as those caused by high inrush currents, while disconnecting branches with prolonged overload. This is ensured even on high-resistance lines and in the case of creeping short circuits. The nominal current for each output can be individually set with a selector switch. If the nominal current is exceeded, the output is automatically switched off after a defined tripping time and can be reactivated after a short waiting period (thermal relaxation) using a button or remote reset. The button also serves for manual switching of the output. The status of the output is indicated by a multi-colored LED.
5. Block DCT encapsulated unregulated PSU,24V 60W
AC or DC input voltage: AC
AC or DC output voltage: DC
Input voltage minimum: 230V AC
Input voltage maximum: 230V AC
Output voltage minimum: 24V DC
Output voltage maximum: 24V DC
Output current: 2.5A
Rated power: 60W
Electrical phases: 1
Type: Linear
Dimensions: 159 x 63 x 94mm
Width: 63mm
Hum and noise voltage: ±5%
The mentioned load regulation is a typical value (unregulated). 6 to 60 W, unregulated, DCT series. 230 Vac input, 12 or 24 Vdc (nominal) output power supply/safety isolating transformer manufactured according to EN61588 and VDE0570. Fully encapsulated in a plastic housing, constructed for easy installation on rails according to DIN EN50022. 3.75 kV input/output, breakdown tested. Screw terminals on input and output. Efficiency: 75% (typical). Integrated fuse and overtemperature cut-off as protection against overload and short circuit.
6. Block PC-0724-800-0I1 Electronic circuit breaker
A cost-effective alternative to traditional circuit breakers are protective switches with a thermomagnetic characteristic curve in the Economy Smart version. They ensure safe tripping even under high line resistances and are ideally suited for device and series machine construction. The electronic protective switch distributes the load current across multiple branches and reliably monitors them for overload and short circuit. It allows short-term current peaks, such as those caused by high inrush currents, while branches experiencing prolonged overload are switched off. This is ensured even on high-resistance lines and in the case of creeping short circuits. The nominal current for each output can be individually set using a selector switch. If the nominal current is exceeded, the output is automatically switched off after a defined tripping time and can be turned back on after a short waiting period (thermal relaxation) using a button or remote reset. The button is also used for manual switching of the output. The status of the output is indicated by a multicolored LED.
7. Block Schaltnetzteil 1+2ph PC-0224-100-0primär 200-500VAC 10A
The Power Compact series switching power supply from Block offers a reliable and powerful solution for various applications in solar, measurement, and control technology. With a nominal power of 240 watts and an output voltage of 24 volts, this power supply is suitable for a wide range of industrial applications. It is characterized by its robustness against transients and high-energy interference pulses at the input, contributing to high system availability. The flexible input range of 180 to 550 volts allows for use in different environments. The output voltage can be easily adjusted via a rotary potentiometer on the front of the housing. Additionally, the robust DIN rail mounting combined with push-in terminal blocks ensures quick and secure installation, significantly simplifying the setup process.
- Robust against transients and interference pulses
- Flexible input range from 180 to 550 V
- Easy voltage adjustment via rotary potentiometer
- Quick installation with push-in terminal blocks.
8. Block PM-0724-200-0 Electronic circuit breaker
A cost-effective alternative to traditional circuit breakers are protective switches with a thermal-magnetic characteristic curve in the Economy Smart version. They ensure safe tripping even under high line resistances and are ideally suited for device and series machine construction. The electronic protective switch distributes the load current across multiple branches and reliably monitors them for overload and short circuits. Short-term current peaks, such as those caused by high inrush currents, are tolerated by the electronics, while branches with prolonged overload are switched off. This is ensured even on high-resistance lines and in the case of creeping short circuits. The nominal current for each output can be individually set using a selector switch. If the nominal current is exceeded, the output is automatically switched off after a defined tripping time and can be reactivated after a short waiting period (thermal relaxation) using a button or remote reset. The button also serves for manual switching of the output. The status of the output is indicated by a multi-colored LED.
9. Block Schaltnetzteil 1+2ph PC-0224-100-2primär 200-500VAC 10A Power
The PC-0224-100-2 switching power supply from Block is a powerful and compact solution for system power supply. With a nominal voltage of 24 volts and a nominal current of 10 amperes, it offers a maximum power output of 240 watts. Its robust design ensures high resilience against transients and energy-rich interference pulses, which increases system availability worldwide. The flexible input range of 180 to 550 volts makes this power supply ideal for various applications in solar technology, measurement and control technology, as well as in mechanical engineering. The output voltage can be easily adjusted via a rotary potentiometer on the front of the housing. Additionally, the DIN rail mounting allows for quick and secure installation, while the push-in terminal blocks facilitate the installation process.
- Robust design for high system availability
- Input range of 180 to 550 volts
- Easy voltage adjustment via rotary potentiometer
- Quick installation through DIN rail mounting and push-in terminals.
Mobile power distributors
EUR439,–
Block Schaltnetzteil 1+2ph PC-0224-100-2primär 200-500VAC 10A Power
10. Block Schaltnetzteil 3ph.PC-0348-200-2primär 400-500VAC 15A Power
The Power Compact series switching power supply from Block offers a reliable and powerful solution for system power supply. With a nominal voltage of 400-500 VAC and a nominal current of 15 A, this device is designed for demanding applications. It is characterized by its robustness against transients and high-energy interference pulses at the input, which increases system availability worldwide. The output voltage can be conveniently adjusted via a rotary potentiometer on the front of the housing, allowing for flexible customization. Installation is quick and secure thanks to the robust DIN rail mounting and push-in connection terminals. For applications with high inrush currents, variants with 50% power reserves are also available, ensuring reliable power supply.
- Adjustable output voltage via rotary potentiometer
- Robust DIN rail mounting for easy installation
- Push-in connection terminals for secure connections
- Optional variants with 50% power reserves available.
Product order
See all products