Best Hager products in the Hazard detectors category
On this page you'll find a ranking of the best Hager products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Hager Radio control center
The Hager RFZ050D wireless control panel is a highly advanced bidirectional wireless fire detection system specifically designed for preventive fire protection in children's day care facilities, smaller homes, and accommodation establishments. This control panel allows for the connection of up to 64 devices, including 50 wireless smoke detectors, 14 wireless indoor sirens, or 10 repeaters, and provides comprehensive monitoring and control across up to 8 alarm zones. The wireless transmission occurs over two separate frequency bands, ensuring reliable communication and interference resistance. The panel is equipped with a clear central display that shows status and alarm messages in plain text and emits acoustic signals. Additionally, the integrated transmission path verification within 300 seconds allows for continuous monitoring of connected devices, enhancing the system's safety and efficiency.
- Bidirectional wireless transmission over two frequency bands (434 MHz and 868 MHz)
- Connection of up to 64 devices in 8 alarm zones
- Integrated automatic sensor identification and push-button learning procedure
- Central display with plain text messages and acoustic signals
- Transmission path verification within 300 seconds for increased safety.
2. Hager RFM101D
Hager Wireless Heat Detector RFM101D
Manufacturer: Hager
Designation: Wireless Heat Detector with Siren EN54-5, white
Type: RFM101D
Operating Principle: Thermodifferential
Response Temperature: -10 °C
Standalone: No
Wired Connectivity: No
Wireless Connectivity (standard): Yes
Wireless Connectivity (optional): Yes
Max. Number of Connectable Units: 1
Primary Power Supply: Battery/Accu
Supply Voltage: 3 V
Voltage Display: No
With Backup Battery: No
Included Backup Battery: None
Volume: 85 dB(A)
Mounting Type: Other
Length: 124 mm
Width: 125 mm
Height: 51 mm
Diameter: 124 mm
Color: White
RAL Number (similar): 9010
Smoke Switch: No
With Orientation Light: No
Type of Test/Pause Button: Combination
Protection Class (IP): IP32
With Q-Label: No
VdS Approved: No
Hager Wireless Heat Detector RFM101D: Additional Details
BEKA wireless heat detector with integrated siren. Bidirectional wireless heat detector according to DIN EN 54-5 with integrated signaling device and threshold tracking, contamination level and battery capacity evaluation, disturbance detection EMC, designed for heat detection using thresholds and A2 characteristics. Integration into the fire detection system RFZxxxD and deactivation of smoke detection via central settings as a day-night function. Area or individual detector alarm signaling possible via integrated signaling device through central menu. Learning mode with optical display on the detector for range indication and display of learning field strength at the central unit. After interruption of the bidirectional polling interval of over 300 seconds with the central unit, the detector switches to an autonomous mode and ensures acoustic signaling in case of fire in its area. Sensor head replacement every 8 years. After the sensor head replacement cycle, no settings need to be made at the central unit, and it automatically recognizes the type of the new sensor head. In case of deviation from the previous sensor head, this must be confirmed at the central unit.
EAN: 3599430014543.
3. Hager Radio smoke alarm set
The Hager wireless smoke alarm set offers a reliable solution for early fire detection indoors. With a modern design and user-friendly installation, this set is ideal for households that prioritize safety. The smoke detectors are battery-operated, ensuring continuous functionality even during power outages. Thanks to the optical warning signals and a sound output level of 85 decibels, the devices can quickly alert occupants to dangers in an emergency. Compatibility with smart home systems allows for easy integration into existing security solutions. This set is a sensible investment in the protection of living spaces and provides a high level of safety for all residents.
- Battery-operated power supply for reliable function without the risk of power failure
- Optical warning signal for quick detection of dangers
- Compatible with smart home systems for easy integration
- Protection class IP32, suitable for indoor use.
4. Hager Wireless push-button alarm TG558B
Hager Wireless Push Button Alarm TG558B
Manufacturer: Hager
Designation: Wireless Push Button Alarm Stop
Type: TG558B
Reporting Type: Other
Height: 125 mm
Width: 125 mm
Depth: 35 mm
Wireless System: Yes
With Glass Panel: Yes
With Paper Cover: No
Color: White
Material: Plastic
Protection Class (IP): IP42
The Hager Wireless Push Button Alarm TG558B is a wireless push button alarm for TG55xA, Alarm Stop, in white. It is suitable for wall mounting and allows for the integration of wireless smoke detectors Comfort VdS Q (up to 40 wireless smoke detectors) as well as the manual triggering of a fire alarm. To activate the alarm, the glass panel is broken, and the push button is pressed. When the flap is opened, a test alarm is triggered. The use of the push button can be replaced separately after the low battery notification, approximately every 10 years. The integrated 3 V lithium battery is not replaceable. Note: Suitable for indoor use only.
5. Hager Optical detector Wired detector
Smoke detector with a compact size and appealing design according to DIN EN 14604, additionally certified under the increased testing requirements of the Q-certification based on the vfdb guidelines 14-01 "Association for the Promotion of German Fire Protection" (vfdb). Enhanced testing criteria against the ingress of foreign bodies as well as improved protection against moist heat, oxidation, and electromagnetic compatibility (EMC) are provided, along with better temperature cycling resistance. The detector is designed for the early detection and signaling of fires with smoke development indoors. A processor-controlled functional self-test occurs every 10 seconds, and the PGSA technology offers independent algorithmic re-triggering in the presence of disturbances such as dust to ensure operational reliability. A large function and reset button spans the entire top of the detector. An acoustic signal (85 dB at 3 m) and a red flashing LED serve as alarms. Additionally, there is an acoustic signal for low battery, contamination, or fault notifications.
6. Hager TG600AL-3 Smoke alarm set Stand.Q.
Smoke alarm set Standard Q, 3x TG600AL, white. The smoke alarm set consists of three TG600AL units with a compact size and appealing design language according to DIN EN 14604, additionally certified under the increased testing requirements of the Q certification based on the vfdb guidelines 14-01 from the Association for the Promotion of German Fire Protection. It offers enhanced testing criteria against the ingress of foreign bodies as well as better protection against moist heat, oxidation, and electromagnetic compatibility (EMC), and is more resilient to temperature fluctuations.
The device serves for the early detection and signaling of fires with smoke development indoors. A processor-controlled functional self-test occurs every 10 seconds, and the PGSA technology allows for independent algorithmic re-triggering in the presence of disturbances such as dust to ensure operational reliability.
A large function and reset button spans the entire top of the detector. The acoustic signal reaches 85 dB, accompanied by red flashing LEDs for alarm indication. There are also acoustic signals for low battery, contamination, or fault alerts, supported by a yellow LED.
A time-limited deactivation function for smoke detection suppresses false alarms for about 12 minutes, with automatic reset to normal operation. Fault alerts can be delayed by hours or days through acknowledgment at the reset button. The fault of a contaminated detection unit cannot be reset as long as the error message is pending in the evaluation unit.
Installation can be done on the ceiling or wall according to DIN 14676. The detector has a camping caravan approval. A disassembly and theft protection feature can be activated, with unlocking possible only using a screwdriver with a maximum size of 7 mm. When screwed into the base, the detector is automatically activated. The battery life is at least 10 years thanks to a sealed lithium battery. TG600AL-3.
7. Hager Radio smoke detector
Hager Wireless Smoke Detector RFM100D
Manufacturer: Hager
Description: Wireless smoke detector with siren EN54-7, white
Type: RFM100D
Operating principle: optical
Response temperature: -10 °C
Standalone: no
Wired connectivity: no
Wireless connectivity (standard): yes
Wireless connectivity (optional): yes
Max. number of connectable units: 1
Primary power supply: battery/rechargeable battery
Supply voltage: 3 V
With voltage display: no
With backup battery: no
Included backup battery: none
Volume: 85 dB(A)
Mounting type: other
Length: 124 mm
Width: 124 mm
Height: 51 mm
Diameter: 124 mm
Color: white
RAL number (similar): 9010
Smoke switch: no
With orientation light: no
Type of test/pause button: combination
Protection class (IP): IP32
With Q-label: no
VdS approved: no
Further details:
The BEKA EN54-7 wireless smoke detector with siren is a bidirectional wireless smoke detector according to DIN EN 54-7, featuring an integrated signaling device and threshold tracking. It provides dirt level and battery capacity evaluation as well as disturbance detection for EMC. The detector is used for smoke detection and can be integrated into the fire detection system. Deactivation of smoke detection via central settings as a day-night function is possible.
Area or individual detector alarm is triggered via the integrated signaling device through the central menu. The learning mode with optical display on the detector shows the range display and the learning field strength at the central unit. After a break in the bidirectional query interval of over 300 seconds with the central unit, the detector switches to an autonomous mode, ensuring acoustic signaling in case of fire in its area.
The sensor head replacement occurs every 8 years. After the sensor head replacement cycle, no settings at the central unit are required, as it automatically recognizes the type of the new sensor head. If there is a deviation from the previous sensor head, this must be confirmed at the central unit.
EAN: 3599430014536.
8. Hager TG550A 10 year radio smoke alarm device white Smoke alarm device with small size in accordance with
The TG550A wireless smoke detector from Hager is a highly advanced safety device designed for the early detection of fires with smoke development in indoor environments. With a compact design and appealing aesthetics, this smoke detector meets the requirements of DIN EN 14604 and has also been tested according to strict Q-certification guidelines. The detector not only offers high protection against the intrusion of foreign bodies but also against damp heat, oxidation, and electromagnetic interference. Installation can be done as a standalone device or within a wireless network with up to 40 additional detectors, providing a flexible and expandable security solution. The patented alarm stop can be activated by any manufacturer-independent IR remote control or through wireless networking with a push button, making it easier to handle in emergencies. The TG550A is therefore a reliable choice for living spaces, motorhomes, and campers.
- Compact design with appealing aesthetics
- Certified according to DIN EN 14604 and Q guidelines
- Wireless networking with up to 40 detectors possible
- Patented alarm stop via IR remote control or wireless networking
- Enhanced protection features against foreign bodies and environmental influences.
Hazard detectors
EUR127,66
Hager TG550A 10 year radio smoke alarm device white Smoke alarm device with small size in accordance with
9. Hager Wireless dual alarm detector TG551A Comfort Q IR alarm stop white
The Hager Wireless Dual Alarm TG551A Komfort Q is an advanced safety device that offers both smoke and heat detection. With its compact design and appealing aesthetics, this alarm is ideal for use in living spaces, kitchens, and even in motorhomes. The innovative threshold detection and temperature rise characteristic A2 allow for precise identification of fire hazards. The alarm meets the stringent requirements of DIN EN 14604 and has also been tested according to Q certification guidelines, ensuring high reliability and safety. The ability to integrate the alarm into a wireless network with up to 40 additional alarms without the need for tools provides a flexible and expandable solution for fire protection. A notable feature is the patented IR alarm stop, which allows for easy deactivation of the alarm without compromising safety.
- Dual-function detection of smoke and heat
- Tool-free wireless networking with up to 40 alarms
- Patented IR alarm stop for easy deactivation
- Meets the enhanced testing requirements of Q certification
- Suitable for use in kitchens and dusty environments.
10. Hager RFM102D
Hager Wireless Dual Detector RFM102D
Manufacturer: Hager
Designation: Wireless dual detector with siren EN54, white
Type: RFM102D
Operating principle: Combination
Response temperature: -10 °C
Standalone: no
Wired connectivity: no
Wireless connectivity (standard): yes
Wireless connectivity (optional): yes
Max. number of connectable units: 1
Primary power supply: Battery/accumulator
Supply voltage: 3 V
With voltage indication: no
With backup battery: no
Included backup battery: none
Volume: 85 dB(A)
Mounting type: other
Length: 124 mm
Width: 124 mm
Height: 51 mm
Diameter: 124 mm
Color: white
RAL number (similar): 9010
Smoke switch: no
With orientation light: no
Type of test/pause button: combination
Protection class (IP): IP00
With Q-label: no
VdS certified: no
Hager Wireless Dual Detector RFM102D: additional details
BEKA wireless dual detector with integrated siren, EN54, white. Bidirectional wireless heat detector according to DIN EN 54-5/54-7 with integrated signaling device and threshold tracking, pollution degree and battery capacity evaluation, disturbance detection EMC, used for smoke detection, integration into the fire detection system RFZxxxD, and deactivation of smoke detection via central settings as a day-night function. Area or individual detector alarm via integrated signaling device through central menu is possible. Learning mode with optical display on the detector for range indication and display of learning field strength at the central unit. After interruption of the bidirectional polling interval of over 300 seconds with the central unit, the detector switches to an autonomous mode and ensures acoustic signaling in case of fire in its area. Sensor head replacement every 8 years. After the sensor head replacement cycle, no settings need to be made at the central unit, and it automatically recognizes the type of the new sensor head. In case of deviation from the previous sensor head, this must be confirmed at the central unit.