Best Axton products in the Car hi-fi speakers category
On this page you'll find a ranking of the best Axton products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Axton ATX165 16.5 cm 2-way coaxial system 90 W RMS
AXTON's new coaxes are designed as a point source. - The 13 mm dome lies on one level with the woofer cone and thus enables an in-phase radiation of the respective frequency components. Phase shifts in the transition range of the frequency components, as they occur with conventional protruding tweeters, are thus a thing of the past. - - The result is a transparent, clear music reproduction with high dynamics. - - - Technical data - Music power handling: 90 W - Rated power handling (RMS): 60 W - Efficiency (1 W/1 m): 91 dB - Frequency response: 60 Hz - 22 kHz - Impedance: 4 Ohm - Mounting diameter: 146 mm - Mounting depth: 59 mm - - Features - - precision-machined sheet steel basket (Euro-DIN) - - voice coil cooling through ventilation openings on the basket - - powerful strontium ferrite magnet - - injection-molded cone made of low-resonance polypropylene - - linear bead made of NBR nitrile rubber - - rear-ventilated Nomex fiber spider - - 25 mm CCAW voice coil on Kapton carrier - - tweeter with 13 mm Mylar dome and kerrofluid-cooled neodymium drive - - foil capacitors as high-pass filter for the tweeter - - hard gold-plated, corrosion-resistant plug-in contacts - - LS grille included.
2. Axton ATX130S 13 cm 2-way coaxial loudspeaker
Axton ATX130S 13 cm / 5.25 inch 2-Way Coaxial System 70 W RMS
Everything about the ATX130S coaxial system: The AXTON ATX130S is a powerful 13 cm / 5 inch coaxial system, a 2-way car speaker with a mounting depth of only 43 mm and a sound system with 70 watts RMS.
The new AXTON 13 cm coaxial system ATX130S replaces the successful predecessor model, which was awarded Best Product, and offers a significant increase in efficiency and performance. The ATX130S impresses with its dynamic sound and enormous spatiality, as well as its ease of installation: The innovative speaker baskets made of high-strength, low-vibration composite material allow for a minimal mounting depth of 43 mm – a true problem solver for tight installation spaces!
The woofer/midrange drivers use a specially shaped basket that provides the necessary stability and contributes to optimal voice coil ventilation through the rear openings. Additionally, there is the proven AXTON PP diaphragm with its excellent damping and a massive ferrite magnet that increases efficiency. The progressive suspension with Nomex spider and durable rubber surround is a lightweight, long-lasting frame that ensures high linearity and accuracy.
The new 13 cm 2-way sound system is designed as a point sound source. The 13 mm tweeter with ferrofluid-cooled neodymium drive is on the same plane as the woofer diaphragm, allowing for phase-coherent radiation of the respective frequency components. Phase shifts in the transition range of the frequency components, which occur with conventional protruding tweeters, are thus a thing of the past. The result is a transparent, clear music reproduction with high dynamics.
Highlights:
- 13 cm 2-way coaxial system
- 2-way coaxial system designed as a point sound source for realistic music reproduction
- 13 mm tweeter with Mylar dome and neodymium magnet
- Precision-manufactured composite basket
- Strontium ferrite magnet for the mid-woofer.
3. Axton ATC130S - Autospeakers - 13cm composet - 110Watt - Ondiepe luidsprekers - Autoboxen 100mm
Axton ATC130S 13 cm / 5.25 inch 2-Way Component System 80 W RMS
All about the ATC130S speaker: The Axton ATC130S is a powerful 13 cm / 5 inch component system, a 2-way car speaker with a mounting depth of only 43 mm and a sound system with 70 watts RMS.
The new Axton 13 cm component system ATC130S replaces the successful predecessor model and offers a significant increase in efficiency and performance. The ATC130S impresses with its dynamic sound and enormous spatiality, as well as its installation-friendly design. The innovative speaker baskets made of high-strength, low-vibration composite material allow for a minimal mounting depth of just 39 mm, making it a true problem solver for tight installation spaces.
The woofers/midrange drivers use a specially shaped basket that provides the necessary stability and contributes to optimal voice coil ventilation through the rear openings. Additionally, the proven Axton PP diaphragm offers excellent damping, and a massive ferrite magnet increases efficiency. The progressive suspension with Nomex spider and durable rubber surround is a lightweight, long-lasting frame that ensures high linearity and accuracy.
Thanks to the 25 mm textile dome tweeter, extended listening sessions at high volumes are a pleasure. The special diffuser allows for targeted sound dispersion and optimizes stage imaging. The tweeter is resonance-free and accurate in reproduction, while also having a compact size. For flexible installation, even away from the original mounting location, the set includes a mounting housing that allows for two different radiation angles.
The ATC130S can easily replace the factory-installed components: The woofers can be swapped 1:1, and the installation of a common crossover for mid/woofer and tweeter is not necessary. A crossover is located directly on the woofer, and the compact 6 dB/octave tweeter crossover (with 0 / -3 dB level attenuation) is also included.
Car hi-fi speakers
EUR114,78
Axton ATC130S - Autospeakers - 13cm composet - 110Watt - Ondiepe luidsprekers - Autoboxen 100mm
4. Axton ATX100S 10 cm 2-way coaxial loudspeaker
Axton ATX100S 10 cm / 4 inch 2-Way Coaxial System 60 W RMS
All about the ATX100S speaker: The Axton ATX100S is a powerful 10 cm / 4 inch coaxial system, a 2-way car speaker with a mounting depth of only 39 mm and a sound system with 60 watts RMS.
The new Axton 10 cm coaxial system ATX100S replaces the successful predecessor model, which was awarded Best Product, and offers a significant increase in efficiency and performance.
The ATX100S impresses with its dynamic sound and enormous spatiality, as well as its ease of installation. The innovative speaker baskets made of high-strength, low-vibration composite material allow for a minimal mounting depth of 39 mm, making it a true problem solver for tight installation spaces.
The woofers/midrange drivers use a specially shaped basket that provides the necessary stability and contributes to optimal voice coil ventilation through the rear openings. Additionally, it features the proven Axton PP diaphragm with excellent damping and a massive ferrite magnet that enhances efficiency.
The progressive suspension with Nomex spider and durable rubber surround is a lightweight, long-lasting frame that ensures high linearity and accuracy.
The new 10 cm 2-way sound system is designed as a point sound source. The 13 mm tweeter with ferrofluid-cooled neodymium drive is on the same level as the woofer diaphragm, allowing for phase-coherent radiation of the respective frequency components. Phase shifts in the crossover range of frequency components, which occur with conventional protruding tweeters, are thus a thing of the past. The result is a transparent, clear music reproduction with high dynamics.
Highlights:
- 10 cm 2-way coaxial system
- 2-way coaxial system designed as a point sound source for realistic music reproduction
- 13 mm tweeter with Mylar dome and neodymium magnet
- Precision-manufactured composite basket
- Strontium ferrite magnet for the mid-woofer
- Resonance-optimized polypropylene...
5. Axton AE652F 16CM 2-WAY COAXIAL AE652F
The Axton AE652F is a high-quality 2-way coaxial speaker specifically designed for automotive use. With a compact design and a robust steel basket construction in Euro-DIN format, this speaker offers excellent sound quality and durability. The powerful strontium ferrite magnet ensures strong performance, while the lightweight polypropylene injection-molded diaphragm provides precise reproduction across the entire frequency range. The polyurethane foam surround contributes to flexibility and longevity, while the 13 mm mylar dome with ferrofluid-cooled neodymium driver enhances heat dissipation and sound fidelity. The speaker is rated for a nominal power handling of 110 watts and offers a frequency response of 60 Hz to 25 kHz, making it an ideal choice for music lovers who value quality and performance.
- Compact steel basket construction in Euro-DIN format
- Lightweight polypropylene injection-molded diaphragm for precise sound reproduction
- Polyurethane foam surround for increased flexibility and durability
- Frequency response of 60 Hz to 25 kHz for a wide sound spectrum
- Includes grille for coax versions with round basket.
