Best selling Garage equipment from Unitec
This page always stays fresh and updates automatically.
1. Unitec Breakaway rope
Tear-off cable with ring and carabiner hook. Used to trigger the trailer's breakaway brake. This blocks the trailer's brake, preventing it from rolling uncontrollably if the connection to the towing vehicle's coupling is interrupted. Required for all braked trailers. Length: approximately 100 cm.
2. Unitec Coupling protection cap
Coupling protection cap for easy installation. Attractive due to its high-quality appearance. Protects clothing from dirt. The protective cap is made of soft material that prevents breakage. Suitable for all standard couplings.
3. Unitec Socket 7-pin
For mounting on 7-pin connectors. Screw connection with strain relief. Load capacity: 25 A at 12 V. Includes automatic shutdown for fog lights.
4. Unitec Short adapter
Mini adapter 12V 7-pin to 13-pin. 13-pin for new vehicles. 7-pin mainly for older vehicles, trailers, etc. Complies with ISO 1724 and 11446 standards.
5. Unitec Towing ball coupling
With these cartrend towing ball couplings, trailers can be prepared for combination with ball head couplings on passenger cars. The installation of the towing ball coupling on the trailer is successful with all square towing tubes that have a width of 60 mm. All necessary mounting holes for the screw fastening to the coupling jaw are already pre-drilled, which speeds up the installation process. The cartrend towing coupling for trailers is compatible with round trailer couplings that have a diameter of 50 mm. These ball head couplings are standard and therefore widely used. Thus, such a trailer is ready for combination with most couplings on vehicles. The connection between the passenger car and the trailer can be quickly released and secured, as there is a large handle for operation. This also provides security through the locking mechanism, ensuring that the coupling and ball head are firmly connected. The cartrend towing coupling for trailers is compatible with passenger car trailer couplings with a maximum support load of 75 kg. Furthermore, it is permitted for use on trailers with an axle load of up to 750 kg. Helpful for coupling a trailer is the sticker near the handle, which indicates the wear limit of the coupling, making it immediately clear whether the connection between the trailer and the coupling is correct and secure.
6. Unitec Coupling head
The round ball head coupling has a diameter of 60 mm. The maximum axle load is 750 kg, and the maximum pulling load is 75 kg.
7. Unitec Plug 7-pin
For mounting on 7-pole connections. Screw connection with strain relief. Load capacity: 20 A at 12 V.
8. Unitec Rear reflector
The rear reflector from Unitec is an essential accessory for garage equipment that significantly enhances visibility in road traffic. These self-adhesive reflectors are made from high-quality ABS plastic and provide a reliable solution for increasing safety. With a compact size, they are easy to install and are ideal for mounting on vehicles or near garages. The reflector is designed in a striking red color, optimizing visibility in low light conditions. The package includes two pieces, allowing for even distribution or replacement. These reflectors are not only functional but also contribute to road safety by making potential hazards visible.
- Self-adhesive for easy installation
- Made from high-quality ABS plastic
- Improves visibility in road traffic.
9. Unitec Holder for trailer breakaway cable Spring eyelet
A trailer safety hook with a spring eye like this one from cartrend is designed to secure the trailer breakaway cable between the vehicle and the trailer. The trailer breakaway cable serves as a safety measure in case the trailer detaches from the hitch while driving. This ensures that a connection remains intact, allowing the vehicle to be stopped before the trailer drifts uncontrollably into traffic. In some countries, the use of such a device is legally required, including Switzerland and the Netherlands. Therefore, it is important to install a trailer safety hook before traveling to these countries. This applies to both flatbed trailers and caravans. This way, you can avoid hefty fines. The installation of the cartrend trailer breakaway cable is simple and can be completed quickly. The holes for attachment are pre-drilled and have a distance of 85 mm. Additionally, it is compatible with all ball neck couplings with a diameter ranging from 30 to 50 mm.
Garage equipment
Quantity discount
EUR12,87 per piece for 2 units
Unitec Holder for trailer breakaway cable Spring eyelet
10. Unitec Spout
The Unitec pouring spout is designed for the 20L metal canister from Cartrend and is also compatible with the common 20L metal canisters from Valpro. Its additional air vents and flexible construction allow for comfortable and quick pouring. The securing hook ensures a firm fit and a drip-free application. Made from stainless steel, it is ideal for use with cars, trucks, tractors, boats, or motorcycles.
Product order
See all products