Detectors
EUR115,61
Laserliner Locating device MultiScanner Plus 080.967A Locating depth (max.) 120mm Suitable for ferrous metals
Best Laserliner products in the Detectors category
On this page you'll find a ranking of the best Laserliner products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Laserliner Locating device MultiScanner Plus 080.967A Locating depth (max.) 120mm Suitable for ferrous metals
Electronic locating device for metal objects, power lines, as well as wall and cross beams - including depth indication in metal mode and display of center and edges when locating beams.
Additional technical specifications:
- Weight: 178 g
Scope of delivery: MultiScanner Plus, Li-Ion battery pack, USB-C cable, carrying case.
Note on the disposal of batteries and accumulators: Since we sell batteries and accumulators or devices that contain batteries and accumulators, we are required by the Battery Act (BattG) to inform you of the following: The symbol of the crossed-out trash can on batteries or accumulators means that they must not be disposed of in household waste after use. If batteries or accumulators contain mercury, cadmium, or lead, you will find the respective chemical symbol (Hg, Cd, or Pb) below the symbol of the crossed-out trash can. Every user of batteries or accumulators is legally obligated to return old batteries and accumulators. You can do this free of charge at retail stores or at another collection point near you. Addresses of suitable collection points in your area can be obtained from your city or municipal administration. For batteries that contain more than 0.0005 mass percent mercury, more than 0.002 mass percent cadmium, or more than 0.004 mass percent lead, the chemical designations of the respective hazardous substance are located under the trash can symbol. The chemical designations have the following meanings: Pb: battery contains lead, Cd: battery contains cadmium, Hg: battery contains mercury.
2. Laserliner Coating thickness gauge CoatingTest-Master
Compact thickness gauge with indication and eddy current principle for detecting substrate materials. It features an internal memory for 400 measurements and allows for one- and two-point calibration. The device measures non-magnetic coatings such as paint and zinc on steel, as well as insulating coatings on non-ferrous metals. Additionally, the device automatically recognizes the material being measured and distinguishes between ferrous/ferromagnetic and non-ferrous/non-ferromagnetic materials.
The CoatingTest-Master offers a USB interface, a illuminated and clear display, as well as an internal memory for 400 measurements. Non-destructive measurement of coating thickness is applicable in many fields. The precise and spot-on measurement of coating thickness is not only in demand for quality control in painting companies and the automotive industry, but also enables sustainable corrosion protection for metallic components through the inspection of material coatings.
The Laserliner brand is a globally competent partner in planning, new construction, modernization, renovation, and refurbishment. Laserliner measuring devices are characterized by numerous technical innovations. Reliable products provide more safety in daily use and save time and costs. Discover the extensive range that is application-oriented and user-friendly: rotary lasers, cross and line lasers, moisture and building inspection, distance meters, electronic locating devices, spirit levels, and angle gauges.
3. Laserliner CenterScanner Plus
The precise drilling guide consists of a transmitter and a receiver, allowing for the safe alignment of the drill channel for wall and ceiling drilling up to 150 cm. Location is indicated by easily visible LED indicators and acoustic signals. Well-accessible marking aids in both the transmitter and receiver assist with center alignment. The integrated LCD display can determine the required drilling depth of up to 200 cm. The TX transmitter with metal and voltage detection ensures effective prevention of misdrilling. An optical and acoustic warning is emitted when foreign objects are detected. The simple and accurate alignment of the drill channel, as well as the precise location of entry and exit points, is achieved through the LED indicators.
4. Laserliner Locating device MultiFinder Plus 080.965E Locating depth (max.) 100mm
This universal locating device is suitable for wood, metal, copper, iron, and live wires. It quickly adapts to the substrate right after being switched on, saving time. The user guidance on the illuminated LCD display makes the device easy to handle. With the permanent voltage warning, high safety is ensured. A special feature: in metal mode, it also detects non-live wires behind walls. The housing of the locating device is largely made from recycled plastic, contributing significantly to sustainability.
5. Laserliner Locator MultiFinder Pro
Multiple integrated sensors make the MultiFinder Pro a locating device for various applications. One-button operation allows for switching between different measurement modes. The user guidance on the LCD display ensures that the device can be used easily and safely. Auto-Calibration adjusts the device to different surfaces immediately after switching it on. Auto-Cal Plus enables easy narrowing down of measurement objects in metal scan mode. Acoustic and optical signals assist in locating items. The continuous voltage warning ensures a high level of safety. Special feature: In metal mode, non-energized wires behind walls can also be detected.
6. Laserliner Locating device StarFinder Plus 080.972E Locating depth (max.) 40mm
The electronic locating device detects the exact position of live electrical wires, wall studs, and cross beams. It informs the user through an accurate LCD bar display, which also registers very slight positional changes and movements of the device. This helps to avoid misdrilling and costly repair work. In drywall construction, stable points for hanging objects and areas without substructures, such as for doorways, can be identified. The continuous voltage warning protects against unshielded live wires during drilling. The housing of the locating device is largely made from recycled plastic, contributing significantly to sustainability.
7. Laserliner Electronic locator StarSensor 150 - 080.977A
This electronic locating device detects walls and beams as well as live wires in drywall. The device simultaneously checks the surface at nine points and signals the detection of hidden objects via a clearly visible LED display. The extra-wide screen with closely arranged LEDs allows for complete and precise identification of both single and double paneling. Thanks to the simple one-handed operation and ergonomic housing, using the device is comfortable. The continuous voltage warning ensures high safety. No calibration of the device is required.
Main features:
- Detectable materials: Ferrous metal, live wire, metal, non-ferrous metal, wood
- Product color: Black, Gray, Orange
- Maximum detection depth (steel): 4 cm
- Maximum detection depth (copper): 4 cm
- Maximum detection depth (wood): 4 cm
- Maximum detection depth (live wire): 2 cm
- Voltage range detection: 110 - 230 V
- Acoustic signals: Yes
- Built-in display: No
- Precision: 3%
- Sustainability compliance: Yes
- Sustainability certificates: CE, UKCA
- Battery type: AAA
- Battery voltage: 1.5 V
- Number of supported batteries: 2
Weight and dimensions:
- Width: 140 mm
- Depth: 52 mm
- Height: 74 mm
- Weight: 184 g
Energy:
- Power source: Battery
Operating conditions:
- Operating temperature: 0 - 40 °C
- Storage temperature range: 10 - 50 °C
Delivery contents:
- Carrying case: Yes.
8. Laserliner LuxTest-Master
The LuxTest Master from Laserliner is a professional illuminance meter designed for measuring light levels in workplaces, offices, public buildings, and industrial settings. The sensitive photodiode with cosine correction captures light from wide angle ranges.
9. Laserliner Locating device CombiFinder Plus 080.955E Locating depth (max.) 75mm
This electronic locating device reliably detects metals as well as the position and path of live electrical cables. This helps avoid unnecessary drilling and identify potential hazards. Clear signals inform the user when locating objects. The continuous voltage warning ensures high safety during work. The housing of the locating device is largely made from recycled plastic, contributing significantly to sustainability.
10. Laserliner CenterScanner Compact
This precise drilling guide device, consisting of a transmitter and receiver, allows for the safe alignment of the drill channel for wall and ceiling drilling up to 120 cm. Location is indicated by easily visible LED indicators and optional acoustic signals. Easily accessible marking aids on both the transmitter and receiver assist with center alignment. The integrated LCD display can determine the required drilling depth of up to 150 cm. When foreign objects are detected, an optical and acoustic warning is emitted. Thanks to its ergonomic design, the transmitter and receiver fit comfortably in the hand.
