Best selling Charge controllers from Victron Energy
This page always stays fresh and updates automatically.
1. Victron Energy BlueSolar MPPT 150/60-Tr
MPPT controller with an efficiency of over 98%. Fast MPPT controller for maximum energy yield. Fully programmable charging algorithm. Protection against overheating and short circuits. The algorithm maximizes energy output. Rated PV power, 12 V: 860 W. Rated PV power, 48 V: 3440 W. Especially in overcast conditions, when light intensity is constantly changing, an extremely fast MPPT controller can improve energy yield by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. In the case of partial shading, there may be two or more maximum power points on the current-voltage curve. Conventional MPPTs tend to lock onto a local maximum power point, which may not be the optimal point. The innovative algorithm of this device maximizes energy yield by locking onto the optimal point. Fully programmable charging algorithm as well as eight pre-programmed algorithms that can be selected via a rotary knob. Overheating protection and load reduction at high temperatures. Protection against PV short circuits and PV reverse polarity. PV backflow protection.
2. Victron Energy SmartSolar MPPT
A solar charger is powered by solar modules and stores this energy in batteries. Using the fastest technology, the SmartSolar maximizes this energy collection and directs it intelligently to fully charge the batteries in the shortest time possible. The SmartSolar maintains the functionality of the battery, thereby extending its lifespan. The SmartSolar charge controller can even recharge a deeply discharged battery. It can operate with a battery voltage as low as 0 volts, provided that the cells are not permanently sulfated or otherwise damaged.
What our customers think
Pro
- App operation super
- Everything visible in the app
- Simple installation
3. Victron Energy BlueSolar
The load output disconnects the loads when the battery has been discharged to a predetermined voltage level. Alternatively, an algorithm for intelligent battery management can also be selected. The load output is short-circuit proof. Some loads, particularly inverters, are best connected directly to the battery. The inverter remote control is best connected to the load output. In some cases, a special interface cable may be required.
The BatteryLife algorithm monitors the state of charge of the battery. If necessary, it raises the threshold for disconnecting the load day by day until the energy gained is sufficient to charge the battery to nearly 100%. From this point on, the threshold for disconnecting the load is modulated so that charging to nearly 100% is achieved approximately once a week. Options for displaying data in real-time are available for Apple and Android smartphones, tablets, and other devices.
4. Victron Energy BlueSolar PWM-Pro 12V 24V 20A Solar Charge Controller
The Victron BlueSolar PWM-PRO 20A (MPN SCC010020110) is a solid entry-level device for solar technology and already has a number of professional functions integrated. In addition, it can handle both the 12V and 24V battery voltage ranges and is therefore very flexible in its use. Compared to the PWM_Light series, the BlueSolar series from Victron offers the user a lot more comfort and configuration options. In addition, a remote display is optionally available with the help of which the controller can be monitored and configured.
Charge controller
−7%
EUR55,41 was EUR59,56
Victron Energy BlueSolar PWM-Pro 12V 24V 20A Solar Charge Controller
5. Victron Energy Phoenix Charger
Adaptive four-stage charging characteristic: constant current ("bulk") phase, constant voltage ("absorption") phase, float voltage ("float") phase, storage voltage ("storage") phase The microprocessor-controlled 'adaptive' battery management system of the Phoenix charger can be adapted to different battery types. 'Adaptive' means that the charging characteristic is automatically adapted to the type of battery utilisation. The right amount of charge: adapted constant voltage time In the case of low battery discharge (e.g. a yacht connected to shore power), a short constant voltage phase is selected to prevent overcharging. After a deep discharge, the constant voltage phase is automatically extended to ensure that the battery is fully charged. Preventing damage due to excessive gassing: the battery protection mode In order to shorten the charging time, the highest possible charging current was selected together with a high constant voltage. However, to prevent excessive gassing towards the end of the constant current phase, the Phoenix charger limits the speed of the voltage increase after the gassing voltage has been reached. Less maintenance and ageing when the battery is at rest: storage mode Storage mode is always activated if no discharge has taken place within 24 hours. In storage mode, the charge retention voltage is then reduced to 2.2 V/cell (13.2 V for a 12 V battery) in order to minimise gassing and corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This achieves a kind of equalising charge that prevents electrolyte stratification and sulphation - the two main causes of premature battery failure.
6. Victron Energy BlueSolar MPPT 100/50
MPPT controller with an efficiency of over 98%. Fast MPPT controller for maximum energy yield. Fully programmable charging algorithm. Protection against overheating and short circuits. The algorithm maximizes energy output. Rated PV power, 12 V: 700 W. Rated PV power, 24 V: 1400 W. Especially in overcast conditions, when light intensity is constantly changing, an extremely fast MPPT controller can improve energy yield by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. In the case of partial shading, there may be two or more maximum power points (MPP) on the current-voltage curve. Conventional MPPTs tend to lock onto a local MPP, which may not be the optimal MPP. The innovative algorithm of the BlueSolar device maximizes energy yield by locking onto the optimal MPP. Fully programmable charging algorithm as well as eight pre-programmed algorithms that can be selected via a rotary knob. Overheating protection and load reduction at high temperatures. Protection against PV short circuits and PV reverse polarity. PV backflow protection.
7. Victron Energy SmartSolar MPPT 250/70-Tr
The SmartSolar MPPT 250/70-Tr from Victron Energy is a highly advanced charge controller designed for the efficient use of solar energy. With a maximum PV input voltage of 250 V DC and a rated current of 70 A, this controller can support a variety of battery systems with 12, 24, 36, or 48 volts. The innovative technology of the device enables ultra-fast power tracking and automatic detection of the optimal operating point, even in partial shading. This ensures maximum energy yield and increases the efficiency of the entire system. Additionally, the controller is equipped with an integrated Bluetooth module, allowing for easy analysis and configuration via mobile devices. The SmartSolar MPPT 250/70-Tr sets new standards in the industry by achieving an efficiency of up to 99%, making it one of the best options on the market.
- Maximum PV power: 1000 W (12 V), 2000 W (24 V), 4000 W (48 V)
- Integrated Bluetooth module for easy configuration and monitoring
- Ultra-fast power tracking and automatic power point detection
- High efficiency of up to 99%
- Supports parallel operation with other controllers of the same type.
8. Victron Energy SmartSolar MPPT 75/10
Ultra-fast Maximum Power Point Tracking (MPPT). Detection of the Maximum Power Point even in partial shading. Load output. Flexible charging algorithms. Overheat protection and load reduction at high temperatures. Automatic battery voltage detection and intelligent battery management through load shedding. A solar charger is powered by solar modules and stores this energy in batteries. Using progressive technology, the BlueSolar charge controller maximizes this energy harvesting and directs it intelligently to fully charge the batteries in the shortest time possible. The device maintains the battery's functionality, thereby extending its lifespan. By continuously monitoring the voltage and current output of your solar modules, the BlueSolar MPPT technology ensures that all available energy is extracted from the modules and stored. The advantage is most noticeable when the sky is partially overcast and light intensity is constantly changing. You can control and monitor the extensive features of your BlueSolar MPPT charger remotely: Bluetooth Smart allows setup and monitoring with a smartphone or other Bluetooth-enabled device. When your system is connected to the Victron Remote Management Internet portal, you have full access to your MPPT anytime and from anywhere. Both services are available free of charge.
What our customers think
Pro
- Statistics via Bluetooth
- Simple operation via app
Contra
- somewhat expensive
- Settings could be more user-friendly
9. Victron Energy SmartSolar MPPT 250/85 VE.Can
Solar charge controller SmartSolar MPPT 250/85
A solar charger is supplied with energy via solar panels and then stores it in batteries. Using the latest and fastest technology, the SmartSolar maximizes energy harvesting and intelligently directs it to fully charge the batteries in as short a time as possible. The SmartSolar maintains the battery's functionality, extending its life. The SmartSolar charge controller can even recharge a severely discharged battery. It can operate with a battery voltage as low as 0 volts, provided the cells are not permanently sulfated or otherwise damaged.
MPPT: Ultra-fast maximum power point tracking
By continuously monitoring the voltage and current output of your solar panels, MPPT technology ensures that all available energy is drawn from the panels and stored. The advantage of this is most noticeable when the sky is partially overcast and the light intensity is constantly changing.
Remote monitoring and control
You can remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in Bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the Victron Remote Management Internet portal via a GX device, you have full access to your MPPT anytime and from anywhere. Both VictronConnect and VRM are available free of charge. For remote installations, even if there is no internet connection nearby, you may be able to monitor your MPPT by connecting to the GlobalLink 520.
VictronConnect
With VictronConnect, you can get live status information and configure all Victron products that either have a built-in Bluetooth function or are connected with a VE.Direct Bluetooth Smart dongle.
For more information, see the VictronConnect manual.
10. Victron Energy BlueSolar MPPT 100/30
The Victron MPPT 100/30 is part of the large family of BlueSolar MPPT charge controllers and, like its larger siblings, offers ultra-fast power tracking, which can increase the yield of your solar system. In addition to the greater charging and PV power, this Blue model differs even more from the lower models. The 100/30 controller has the ability to fully program and store various charging algorithms. The custom-created algorithms can then be directly selected via a switch knob on the housing. The load output directly on the controller is no longer present from this model onwards.
Compared to the smaller models in the BlueSolar MPPT series, the 100/30 offers overheating protection with a shutdown function and automatic restart once a normal operating temperature is reached. The high-speed MPP tracker of the latest generation significantly improves energy yield, especially in overcast conditions where light intensity constantly changes, by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Additionally, the 100/30 features several other innovative technologies, such as the VE.Direct communication port.
Product order
See all products