Best Pressol products in the Cartridge guns + grease guns category
On this page you'll find a ranking of the best Pressol products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Pressol Battery grease gun, 20 V, 2.0 Ah, case
Suitable for processing 400 g grease cartridges, DIN 1284, or loose grease. Processes greases up to NLGI 2 at 20 °C. Integrated display shows the grease delivery amount, battery charge status, and volume under pressure. The display blinks red when there is back pressure or if the power consumption becomes too high. Alarm for grease loss, the grease quantity counter stops. Two adjustable grease delivery speeds (L/H). Form-fitting sleeve for a tight fit with loose grease or cartridges. Up to 25 cartridges per battery charge, charging time 60 minutes. An LED light allows optimal localization of the lubrication area. Bend protection springs prevent kinks in the hose and extend its lifespan. Venting via a vent valve or by a half turn of the grease dispensing tube. Equipped with a stand base and hose holder. Support feet for easy handling and stable hold. The grease dispensing tube is galvanized. Delivery includes: 1 battery grease gun, 2 batteries, 20 V, 2.0 Ah, 1 charger, 1 shoulder strap, 1 high-pressure grease delivery hose with bend protection spring 11 x 1000 mm, 1 precision nozzle, 1 carrying case.
2. Pressol Grease gun
PRESSOL Lever oil-gun PRELIxx PRO, 400 ml silver
The gun operates with grease up to NLGI3, ergonomic handle, slip resistant, outstanding force transmission and grip. No risk of fingers being crushed, rolled thread on the grease gun tube is insensitive to damage by impact and makes for quick and easy screwing in, plunger rod operation, T-design handle, for 400g grease cartridges or bulk grease. Available in 4 different colours, this allows for differentiating the various greases by reference to the colour of the gun.
3. Pressol Grease gun accessory set
The grease gun accessory set from Pressol is a comprehensive solution for the efficient application of lubricants. It includes a cartridge gun as well as a grease press, manufactured according to the DIN 1283 standards. The set features a reinforced hose with a length of 300 mm and a diameter of 8 mm, a nozzle pipe of 150 mm, a 4-jaw hydraulic nozzle, a hollow/universal nozzle, and a pointed nozzle. These components allow for versatile use and adaptation to various lubrication applications. The connection thread has the dimensions M10 x 1 mm, ensuring easy integration into existing systems. Made in the Czech Republic, this accessory set offers high quality and durability. With a total length of 12110 mm, it is ideal for professional use in workshops or for DIY projects. Therefore, the grease gun accessory set from Pressol is a valuable addition to any tool collection.
4. Pressol 12312 Adapter for one-hand presses
Pressol 12312 Adapter for one-hand presses.
5. Pressol Press à huile
Rigid tube and follower piston.
6. Pressol Filling adapter for grease gun filler
Adapter for filling 400g cartridges according to DIN 1284.
7. Pressol Compressed air grease gun
The device processes fats up to NLGI 2. The strong knurling ensures a secure grip. The performance of the cartridge remains unchanged after 5000 operating cycles. The loose lid with a clamping piece allows for manual assistance of the spring force in any position for compressing loose grease or for pressing the sleeve into damaged cartridges. The pump piston has a high precision fit to the cylinder, preventing false lubrication. Quick venting is achieved with a half turn of the grease gun tube. There is a separate filling and venting valve in the grease gun head. The handle on the push rod ensures safe handling.
8. Pressol Grease gun two hand grease gun
The two-hand grease gun impresses with particularly ergonomic and slip-resistant handles. Thanks to the variable stroke, minimal leverage is sufficient for grease delivery. In the case of high resistance, small strokes can overcome the lubrication point with significantly less effort. Additionally, the fill level and type of grease are visible.
Features:
- Variable stroke: Minimal leverage is sufficient for grease delivery
- Small strokes can overcome the lubrication point with significantly less effort in case of high resistance
- Processes greases up to NLGI 2
- Quick and clean cartridge change is easily possible
- Complete emptying of the cartridge, making it environmentally friendly
- Top-class handle, ergonomic and slip-resistant
- No formation of air pockets
- Pump piston, cylinder, and O-ring with 6 µ precision (no false lubrication)
- Hand lever coated with cataphoresis
- Fill level and type of grease visible
- Simple construction using vacuum principle
Delivery includes:
1 piece two-hand grease gun
1 piece armored hose 300 mm, with sealing ring
1 piece precision nozzle
Technical data:
Thread size: M10 x 1
Type: ZHFP
Max. delivery pressure: 400 bar
Weight: 1.08 kg.
9. Pressol Grease gun
PRESSOL Hand lever gun, 450 / 500 ml
Light industrial design, with ball valve in grease gun head for prevention of false lubrication, even force application; with high pressure rubber hose length 300 mm, extension tube 150 mm and four-jaw hydraulic gripper head; for direct filling with grease or use with grease cartridges, wall thickness 1 mm.
10. Pressol Grease gun easyFILL ONE 400 M 10 x 1
Grease gun, M 10 x 1 a, 11 x 300 mm, with sealing ring. Precision nozzle, 4 BA, M 10 x 1 i. Grease follower piston, 10 pieces. Galvanized parts: handle, lever, pull tab. Zinc die-cast grease gun head Z 410. Ergonomic handle, non-slip, excellent power transmission and handling.
Special features:
- The design allows for one-handed lubrication, making it easier to work in hard-to-reach lubrication points.
- Can be switched from high-volume grease delivery to high pressure using the handle.
- Easy disassembly allows for hassle-free cleaning.
- Rolled thread on the grease gun tube is resistant to damage from impacts and enables quick and easy screwing with 1.5 turns.
- Quick venting with a half turn of the grease gun tube.
- Designed for rough use.
- Based on DIN 1283.
