The measuring mode analog signal 0/2 to 10 V DC is supported at two measuring inputs. Two parameters can be displayed simultaneously via the multiple display and threshold values can be provided with individual colour warnings. Min and max values are recorded and can be displayed and reset via jumper or external switch. The device records measured values of a parameter over a period of time from three minutes up to 14 days. The time range as well as the display of the graph of the measured values can be switched by an external switch. The values remain stored as long as the device is supplied with voltage. The following parameters can be configured via the associated USB configuration software: Scale deflection, scale labeling, display design (pointer, tacho, bar, etc.), start graphic, illumination color, threshold values for the alarm outputs, color warning per threshold value (illuminated or flashing), hysteresis and many more. The measured values in the measuring memory can be read out via software, and continuous measured value transmission can be activated. The measured values can be evaluated graphically within the software and exported as a CSV file.