DALI Gateway Pro, SpaceLogic KNX DALI Gateway Pro 2.0. The SpaceLogic KNX DALI Gateway Pro controls electronic ballasts with a DALI interface via the KNX installation bus. The gateway is DALI 2.0 Multi-Master certified. It supports KNX Longframe communication and is compatible with KNX security telegrams and devices, and can be activated in the ETS 5 software. Access to the device itself (e.g., for a download) is protected by KNX Secure. It supports ballasts according to EN 62386-102 ed1 (DALI1), devices according to EN 62386-102 ed2 (DALI2), as well as DALI2 motion detectors and light sensors according to EN 62386-303 and EN 62386-304. The gateway has a DALI output that can control up to 64 electronic ballasts. Additionally, up to 8 DALI2 motion detectors or light sensors can be connected. Multi-master operation according to EN 62386-103 ed2 is permitted. The required power supply for the connected ballasts and motion detectors is provided directly by the device. Additional DALI power supplies are not required. Each DALI gateway can control the ballasts in 16 groups. In addition to group control, the gateway also allows for individual control (single addressing) of up to 64 ballasts. Furthermore, the gateway enables the operation of single-battery emergency lights (EN 62386-202). Central battery emergency lighting systems are also supported. DALI commissioning and configuration, as well as group assignment and scene setting, can be performed via the gateway. It features an integrated bus coupler. Designed for mounting on DIN rails TH35 according to EN 60715. The bus connection is made via a bus connection terminal; a data rail is not required.