The wireless connect actuator is a radio receiver designed for retrofitting existing mechanical or electrical motors for blinds, awnings, or roller shutters to wireless operation. The wireless connect actuator is operated by radio transmitters and control units. It offers both a tubular motor mode and a blind mode, which can be configured via the radio control units. For example, in blind mode, a reversing automation or a tap operation can be set. Thanks to a standard plug connection, the wireless connect actuator is compatible as an intermediate plug with the 3(4)-pole Hirschmann STAS3 / STAK3 plug system. The wireless connect actuator has a supply voltage of 230 V and is classified with protection class IP 54. The wireless connect actuator UP has a standby consumption of less than 0.5 W. The maximum switching capacity is 5 A for resistive loads and 2 A for inductive loads. The transmission frequency is 434.5 MHz with a maximum transmission power of 10 mW. In open field, a range of approximately 100 m is achieved, and around 30 m indoors (depending on the building structure). The dimensions are 123.5 x 33.5 x 26.5 mm (L x W x H).