Cover caps for SAH 15. To be pushed onto the cabinet hanger. Guidelines for the load capacity of cabinet hangers and accessories: When it comes to the load capacity of cabinet hangers and accessories, the following principles must be observed: Both the furniture construction and the material and manufacturing quality of the furniture are beyond our control. We also have no influence over the nature of the wall materials. The hanging hooks we offer, in conjunction with dowels, are intended for use in solid bricks, aerated concrete blocks, concrete, or clinker bricks. A hole with a diameter of 8 mm must be drilled into the solid stone material, into which the plastic dowel is to be flush-driven. The minimum screw-in depth of the hook corresponds to the hook length minus 10 mm. For fastening to other wall materials, commercially available special fastening elements must be used. Dowels and screws must be compatible with each other. Dowels screws must not be replaced with standard particle board screws. Attachment of hanging rails: with 2 special screws Ø 5.5 x 50 mm in the area of each cabinet hanger. For cabinet widths of 900 mm or more, an additional special screw Ø 5.5 x 50 mm must be placed centrally behind each cabinet (Type A, Type B, and Type H). Additions such as end shelves are not permitted without separate cabinet hanging. It is the responsibility of the furniture manufacturer or dealer to ensure that the furniture placed on the market complies with the requirements of EN 14749.