Wallbox charging station ER (compliant with calibration law) with UV-resistant plastic housing for charging electric or plug-in hybrid vehicles. Charging mode 3 according to DIN EN IEC 61851-1 (VDE 0122-1) via mode 3 socket type 2, fused via the charging station supply line 32 A (3-phase). Permanently installed charging station for indoor or outdoor use.

Free use or access authorization via RFID authentication. Consisting of wall housing, cable entry for power supply, brightness sensor, RFID reader (sensor, precise user assignment), LED display (status, charge level, error), MID counter (energy recording), public key for checking the charging process, and charging controller with display. The charge controller forms a digital automatic signature. The operating mode (1- or 3-phase) and the charging current (10 - 32 A) are set in the integrated charging controller.

The charging station is connected to a backend system for monitoring and billing via the OCPP protocol. Commissioning is carried out using the embedded web server via Wi-Fi or Ethernet. With the optional load manager (LM), several charging stations can be networked together. The load management supports both static and dynamic load management with integrated direct measurement or direct converter connection.

The power supply to the charging station must have a separate circuit. The connection of several charging stations to the same circuit is not permitted. Each charging station must be protected with a combined residual current circuit breaker/line circuit breaker (RCBO) type A or separately with a residual current circuit breaker (RCD) type A and a miniature circuit breaker (MCB).

A type B RCD is not necessary as a 6 mA DC residual current detection is integrated. The charge controller is configured via the integrated Wi-Fi hotspot or the LAN interface during initial commissioning.

Note: A cable holder, RFID cards, and feet for free-standing installation are optionally available.