DALI 4-Channel KNX Easy Actor, Broadcast, RGB(T)W. The DALI 4-Channel KNX Easy and Broadcast Actor allows the integration of devices with a DALI interface into the easy or KNX system. A maximum of 94 DALI devices can be controlled and visualized. The color and color temperature for luminaires with DALI Device Type 8 for Tunable White and Colour Control according to IEC 62386-209 can be set. The control of color and color temperature is done via relative or absolute dimming as well as through scenes. The manual control available on the device allows for the operation of connected DALI devices even during commissioning on the construction site, without the need for the device to be powered by the KNX bus voltage or configured beforehand. The devices connected to the DALI system are centrally controlled via so-called broadcast commands. The actor enables switching and dimming of the connected DALI devices (electronic ballasts) via central commands per channel (4 channels). A DALI light group corresponds to a KNX actor channel. Additionally, 16 light scenes can be configured and recalled in ETS mode and 8 in easy mode. Commissioning can be done either through easy configuration or with ETS. Feedback on the switching status is provided in both bus and manual operation. Furthermore, it is possible to set a separate on and off delay or a stair light function with a pre-warning feature. The device has the following functions: On/Off switching, dimming, RGBW color control, TW temperature control, time functions, manual operation, scene recalls, and status feedback. Note: The device can be programmed using the easy commissioning tool, domovea basic, or ETS (from version 5).