For wooden fronts and wide aluminium frames. Ideal for higher wall units with split fronts. Carcase height 480-1200 mm. Cabinet width up to 1800 mm. Clear depth of at least 264 mm. Integrated Blumotion adjustment for soft and quiet closing. Low operating forces. Stepless stop. Integrated opening angle limiter. Fixed position of the power reservoir and front attachment. Symmetrical levers. Tool-free assembly. Two types of power reservoir mounting. 3-dimensional adjustment of both fronts. Intermediate hinge including finger safety. Consisting of: 2x symmetrical power levers incl. positioning. 8x chipboard screws Ø 4 x 35 mm. Consisting of: 2x symmetrical energy accumulators with pre-assembled system screws. Power factor (LF) = carcase height (KH) [mm] x front weight including handle weight [kg]. For asymmetrical fronts, calculate with theoretical carcase height (TKH). For asymmetrical fronts: Theoretical carcase height TKH = top front height FHo (mm) x 2 + joints. For asymmetrical fronts, the larger front must be at the top. In the case of overlapping areas, we recommend using the thicker power reservoir. A stop test is recommended in the edge areas of the individual power reservoirs. The power factor can be increased by 50 % if a third energy store is used. A third energy store is recommended for wide carcasses. The reason for this is the possible bending of the front in the open position.