The hinge switch SHS3 offers great flexibility in installation, connection, and adjustment. Since the hinge switch is directly integrated into the protective device, it provides increased protection against tampering. The SHS3 can be used on all doors, hoods, and flaps and can be mounted on either the right or left side. The switching point of the safe hinge switch can be freely adjusted throughout the entire pivot range from 0° to 270°. An integrated fine adjustment screw allows for the switching point to be fine-tuned by +/- 1.5°. Thanks to the included replacement kit, the adjustment of the switching points can be repeated as often as needed when the system is expanded. Since a blank hinge with the same design is also available, conventional load hinges can be omitted. It is a safe, complete solution for rotating protective devices with hinges, including hinge and safety switch. With an IP67 protection rating, it can be used in areas with strict hygiene regulations or heavy contamination. High tampering protection, as it is directly connected to the protective device. Load capacities of up to 1800N. The switching point can be freely set from 0° to 270° and later changed. Easy mounting on profiles. Simple adjustment via an integrated fine adjustment screw. Systems can be mounted on either the right or left side. Low maintenance requirements. Stainless steel hinge with integrated safety switch in a plastic housing.