With the Airblade hand dryer technology integrated into a faucet, hands can be dried in just 14 seconds. There is no need to move to a separate area to dry hands, so no dripping water ends up on the floor. Touch-free infrared activation. Automatic shut-off after 30 seconds. HEPA filter (fiberglass and fleece layers) removes 99.95% of bacteria from the air. The Dyson Airblade Wash+Dry is compatible with most sinks. It is important to ensure that the sinks are not closed with a plug. Inserts with integrated plugs should not be used (e.g., swivel or liftable types). Sink dimensions: All measurements listed here are based on internal Dyson measurements unless otherwise specified. Sink width (minimum): 350 mm. From front to back edge of the sink (minimum): 300 mm. Depth within the sink (minimum): 100 mm. Maximum depth within the sink (only WD06): 200 mm (according to external sink measurements). Sink material/surfaces: Sinks with high-gloss surfaces, such as polished chrome, are not recommended. Ceramic or brushed steel sinks are ideal. When multiple Dyson Airblade Wash+Dry hand dryers are installed side by side, the distance between each fixture should be at least 580 mm.