Best selling Water cooling hoses
Here’s a ranking of the best selling Water cooling hoses. To give you a quick overview, we’ve added the most important information about each product. This page always stays fresh and updates automatically.
1. Corsair Hydro X Series XT Hardline
Corsair Hydro X Series XT Hardline Tubing completes the connections between custom Hydro X Series coolers and puts your coolant on display with crystal clear PMMA tubing. The tubing is designed for high pressure and high coolant temperatures, yet is easy to cut with a standard fine-toothed saw.
2. Alphacool Ice pipe set of 4
The most commonly used method for water cooling so far has been standard PVC hoses. Now, Alphacool offers another way to design a water cooling system. The HardTube variant brings more order to the system, creating a much more structured appearance. Brand new are the brass tubes, available in Black Chrome and Chrome, as well as acrylic tubes, carbon, and borosilicate glass. With the appropriate fittings and a very simple design, these can be connected or attached absolutely leak-proof. The PETG tube can be easily adjusted to the system with the right bending tool, without the need for additional angle pieces. To install the tubes into the system, they need to be cut to the appropriate length. PETG tubes require lower temperatures than acrylic to bend and are generally a bit more flexible and easier to handle. The perfect entry into the world of HardTubes.
3. Alphacool Ice pipe satin 13/10mm - set of 4
The most common hard tubes are clear and transparent. In addition, hard tubes made of brass and carbon have also gained popularity. Now, Alphacool offers the Ice Tube as part of its Ice product line. The surface visually resembles ice and feels like it too—somewhat rough, yet still smooth. The Ice Tube significantly alters the appearance within the system. Especially after filling the system, the actual effect is best observed. The water has the look of frozen ice. When the loop is illuminated with LEDs, clear hard tubes reflect the individual LEDs very well, but this is not the case with the Ice Tubes. Here, the light is diffused, resulting in a much softer and better illumination. The Ice Tube can be bent like all acrylic hard tubes using the appropriate bending tools. However, this noticeably changes the appearance of the Ice Tubes at the bends, no longer matching the original look. This can create an additional effect, but those who wish to maintain the Ice Tube appearance should use appropriate fittings for bends.
4. Aquatuning Hose
This new UV-active hose has significantly increased its brightness through an optimized use of UV-active additives. The flexibility and other technical specifications remain fully intact compared to conventional hoses. Therefore, the hose is ideal for creating the best possible lighting effect in a PC. Additionally, the hose can be slotted to be used, for example, as a cable channel.
Technical data: Allows for tight bending radii and is very flexible. The hose is transparent and fluoresces blue under UV light. Order quantity = hose length in meters. Packaging unit (for resellers): 30 m or 100 m (roll). Compatible with screw fittings and hose fittings. Not compatible with plug connections.
Fluorescent color: blue. Dimensions: 13 mm outer diameter and 10 mm inner diameter.
Please note: Due to transport and storage conditions, the hose may arrive somewhat "chilled" to the customer. Cold PVC hose tends to become a bit stiff. To enable optimal installation, we recommend storing the hose in a warm room for a few hours after receipt or briefly placing it in hot water (e.g., 60°). This will allow the hose to reach its optimal flexibility.
Water cooling hoses
Quantity discount
EUR8,65 per piece for 2 units EUR8,65/1m
Aquatuning Hose
1 m, Plastic
5. Alphacool AlphaTube Hose HF 13/10mm - Ultra Clear 3 m
A water cooling system consists of many different elements: pumps, radiators, cooling blocks, expansion tanks, and often additional components. To build a functional water cooling system, these parts need to be connected. The simplest way to do this is, of course, to use a hose. Here, the Alphacool AlphaTube HF hose is an excellent choice.
Appearance: Available in various vibrant colors, clear, and also UV-active. There is a wide selection of different variants of the AlphaTube HF hoses, making it easy to find the hose that best suits your taste.
Usage: The AlphaTube HF hose has the perfect flexibility for easy handling. It is flexible enough to be laid without effort, yet rigid enough to avoid kinking even at tighter bend radii.
Various sizes: We offer the AlphaTube HF hose in all common sizes.
Technical specifications:
Length: 3 m
Hose size: OD 13 mm / ID 10 mm
Material: PVC
Hardness: 65-70 A-Shore
Operating temperature: -10 - 80 °C
Burst pressure: 8 bar
Nominal pressure: 2 bar.
Water cooling hoses
EUR16,96 EUR5,65/1m
Alphacool AlphaTube Hose HF 13/10mm - Ultra Clear 3 m
3 m, Plastic
6. Teguma Kühlwasserschlauch RADIACORD® Innen-Ø 25,0 mm Länge 40 m
The RADIACORD® cooling water hose is a reliable solution for efficient cooling in various applications. With an inner diameter of 25 mm and a length of 40 m, this hose provides an optimal flow rate for coolant. It is resistant to a variety of antifreezes, making it suitable for use in different climatic conditions. The wall thickness of 3.5 mm ensures additional stability and durability. The hose is made from high-quality plastic, with an extruded inner core that guarantees uniform wall thickness and high flexibility. The smooth outer surface facilitates handling and installation. The RADIACORD® hose is designed for operating temperatures of up to 100 °C, making it a safe choice for demanding applications.
- Resistant to various antifreezes
- Maximum operating temperature of 100 °C
- Wall thickness of 3.5 mm for high stability
- Extruded inner core for consistent quality.
7. Teguma Kühlwasserschlauch RADIACORD®/DIN Innen-Ø 32,0 mm Länge 1 m
The RADIACORD®/DIN cooling water hose with an inner diameter of 32.0 mm and a length of 1 m is a standardized hose suitable for various applications in cooling water and hot water technology. It is characterized by its resistance to a variety of antifreeze agents, making it a reliable choice for demanding environments. The inner core of the hose is smooth, while the outer cover is wrapped, which enhances flexibility and durability. With a wall thickness of 4.0 mm and a working pressure of up to 12 bar, this hose offers high performance and safety in use. The printing according to DIN 73411:1979 ensures compliance with standards, highlighting the quality of the product.
- Resistant to various antifreeze agents
- Suitable for hot water and cooling water applications
- Wall thickness of 4.0 mm for high stability
- Working pressure of up to 12 bar for reliable performance.
Water cooling hoses
EUR42,22 EUR42,22/1m
Teguma Kühlwasserschlauch RADIACORD®/DIN Innen-Ø 32,0 mm Länge 1 m
1 m, Plastic
8. Alphacool Alphac HardTube Bending Kit Basic 1018029
With the Alphacool HardTube Bending Kit Basic, you get all the products needed to trim, deburr, and bend your PETG tubes. The set is designed for hard tubes with an inner diameter of 10 and 13 mm.
Deburring made easy: Anyone working with hard tubes knows that all ends of the tubes must be deburred. The classic deburring tool from Alphacool allows for deburring both the inside and outside of hard tubes. The outer deburring is extremely important to ensure that the hard tubes fit perfectly and do not damage any O-rings. The inner deburring is only meant to remove cutting residues. For clean deburring, the tool features three steel blades with sharpened edges. Its large round shape makes the deburring tool comfortable to hold.
Cutting PETG tubes: The Eistools Modding Cutter works like scissors and is ideal for easily trimming PETG hard tubes. However, it is important to note that acrylic hard tubes cannot be cut.
9. Teguma Kühlwasserschlauch RADIACORD®/DIN Innen-Ø 15,0 mm Länge 1 m
The RADIACORD®/DIN coolant hose with an inner diameter of 15.0 mm and a length of 1 m is a high-quality hose specifically designed for coolant applications and as a hot water hose. It is characterized by its resistance to a variety of antifreeze solutions, making it a reliable choice for various applications. The inner core of the hose is smooth, while the outer cover is wrapped, which enhances flexibility and durability. With a wall thickness of 3.5 mm and a working pressure of up to 12 bar, this hose offers high stability and safety in use. The printing according to DIN 73411:1979 ensures compliance with standards and regulations, highlighting the quality of the product.
- Resistant to various antifreeze solutions
- Suitable for hot water and coolant applications
- Wall thickness of 3.5 mm for high stability
- Working pressure of up to 12 bar for safety.
Water cooling hoses
−20%
EUR30,99 was EUR38,90 EUR30,99/1m
Teguma Kühlwasserschlauch RADIACORD®/DIN Innen-Ø 15,0 mm Länge 1 m
1 m, Plastic
10. Alphacool Hardtube acrylic 13/10mm bent 90 degree
The HardTube project is becoming a reality. Alphacool is taking a completely new approach and making a strong statement! The most commonly used method for water cooling has been regular PVC hoses. Now, Alphacool offers another way to design a water cooling system. The HardTube variant brings even more order to the system, giving it a much more structured appearance. Brand new are the brass tubes, available in Black Chrome and Chrome. With the appropriate fittings and a very simple functionality, these can be connected or attached absolutely leak-proof. The acrylic tube can also be easily adjusted to the system with the appropriate bending tool, without the need for additional angle pieces. To install the tubes into the system, they must be cut to the appropriate length. The following variants are available:
- HardTube 13/10mm clear acrylic 20cm, 40cm, 60cm, and 80cm
- HardTube 13/10mm brass chrome 20cm and 40cm
- HardTube 13/10mm brass deep black 20cm and 40cm
- HardTube 16/12mm clear acrylic 20cm, 40cm, 60cm, and 80cm
- HardTube 13/10mm 90° acrylic 10/30cm, 20/40
- HardTube 16/13mm 90° acrylic 10/30cm, 20/40
Due to the precisely manufactured tubes, the fittings must be pushed on firmly.
Delivery includes: 1x Alphacool HardTube 13/10mm 90° acrylic (PMMA) 10/30cm.
Note: Not compatible with Monsoon fittings.
Water cooling hoses
Quantity discount
EUR13,90 per piece for 2 units EUR34,75/1m
Alphacool Hardtube acrylic 13/10mm bent 90 degree
0.40 m, Plastic
Product order
See all products