Best selling 3D printers
Here's a ranking of the best products in this category. To give you a quick overview, we've also added some key information about the products.
1. Bambu Lab A1 Combo
Bambu Lab A1 printer is a cutting-edge technology that revolutionizes the field of 3D printing. Powered by the latest advancements in additive manufacturing, this printer sets new standards in precision, speed, and versatility. With its sleek design and user-friendly interface, Bambu Lab A1 seamlessly integrates into any professional workspace or personal creative studio. The all-new AMS lite is elegant and reliable, making multi-color 3D printing accessible to everyone. Active Flow Rate Compensation The A1 revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy. Full Auto Calibration The A1 handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically. Quick Swap Nozzle All-new quick swap hotend design, the hotend pops in and out with just 1-Clip. Active Motor Noise Cancelling The A1 can calibrate parameters to match tiny individual differences between each drive motor. This compensates for the unwanted harshness of motor noise. Bed Slinger, with CoreXY Speed And Quality Full-metal rails, rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilizes these features to print a 14-minute benchy with quality and following all the speed benchy rules straight out of the box without using specialized filaments. Sync with Bambu Studio and Bambu Handy Remote control and monitor your printer on Bambu Studio or Bambu Handy. Through the built-in camera, you can also record timelapse videos.
2. Anycubic 3D-Drucker Kobra S1
Designed for speed and precision, the CoreXY design of the Kobra S1 ensures stable and accurate printing, even at high speeds. It delivers high-quality results with a recommended speed of 300 mm/s and a maximum speed of 600 mm/s. Whether you're working on detailed models or quick prototypes, this printer gets the job done efficiently.
Easy maintenance and setup: The hotend, which reaches temperatures of 320 °C, features a quick-release design for easy maintenance, while its aerospace-grade ceramic neck tube ensures reliable performance and heat resistance. The printer comes pre-assembled and is ready to print in just 15 minutes, allowing you to get started quickly.
Quiet and user-friendly: With a silent printing mode that reduces noise to as low as 44 dB, the Kobra S1 is ideal for use at home or in the office. Its 4.3-inch touchscreen and intuitive design make operation simple and hassle-free.
Expand your printing possibilities with multi-color options. Enhanced software integration: The Anycubic Slicer Next and the Anycubic App provide powerful tools for managing your prints. From remote monitoring and real-time control to one-click slicing and printing, these features make the Kobra S1 a versatile and modern 3D printing solution. Whether you're a hobbyist or a professional, the Anycubic Kobra S1 offers reliable performance and user-friendly features in a compact high-speed machine.
Included in the package:
• Kobra S1 printer
• Spool holder
• Screws: M3*6 (2 pieces)
• U-Disk (1 piece)
• Power cable (2 pieces)
• Allen keys: 2.5 / 2.0 / 1.5
• Filament sample
• Activated carbon (1 piece)
• Nozzle cleaning module (1 piece)
• Nozzle silicone part (1 piece)
• Nozzle cleaner
• Grease.
3. Anycubic 3d printer Kobra 3 Combo
Intelligent Multi-Color Printing
With the integration of a four-color printing system (supporting up to eight spools), the Kobra 3 Combo simplifies multi-color printing (or printing with multiple materials) and eliminates extensive workflow adjustments. Immerse yourself in a world of vibrant colors and unleash your creative ideas in multi-color printing.
RFID Compatibility
The ACE Pro is equipped with an RFID reader for Anycubic filaments, providing flexibility in print settings and efficient spool management.
Fast Printing. Seamless
Maximum print speed: 600 mm/s
Maximum acceleration: 11 min 30 s for Benchy print
Recommended print speed: 300 mm/s
Extended Print Volume
Maximize your printing possibilities and fully realize your creative ideas with print sizes of up to 250 mm x 250 mm x 260 mm. The maximum print volume of the Kobra 3 Combo is 16.25 liters.
Smooth and Precise Printing
The Anycubic algorithm precisely monitors and controls the printing in the nozzle, ensuring consistent and smooth extrusion for each layer of the print. This precise control of filament extrusion contributes to flawless printing results.
Filament Drying Anytime
The powerful dual PTC heating system with up to 200 W ensures efficient air circulation and a constant temperature of up to 55 °C, keeping the filament dry at all times. Print and dry simultaneously for up to 24 hours to ensure the quality of the printed model.
Clog Detection Minimizes Filament Tangling
The ACE Pro delivers filaments individually through four tubes, reducing filament length during color changes or filament securing. Additionally, the ACE Pro supports automatic loading and unloading of filaments to avoid mess or tangling. The integrated buffer detects nozzle clogs and interrupts the printing process.
4. Anycubic Cobra 2 Neo
With an impressive maximum print speed of 250 mm/s and a recommended print speed of 150 mm/s, this device ensures a perfect blend of precision and performance, allowing you to bring your ideas to life with unparalleled speed and accuracy. The enhanced extrusion and cooling systems quickly melt filaments through the 60W hot end. At the same time, it is equipped with a cooling fan that operates at 7000 RPM to ensure rapid cooling and shaping of the model.
The linear drive and input shaping functions in the Marlin firmware reduce spills and print resonances, improving print quality and stability while producing smoother and clearer model details. Even beginners can create high-quality works for their first print. The design of a unique module intelligently compensates for the Z-axis offset after automatic leveling, and the Z-axis compensation value supports the needs of various users and usage scenarios, making the creation process efficient and straightforward.
The entire machine consists of five modules with a portal frame construction, allowing for easy assembly and less maintenance for a quick printing experience. The use of a 2.4-inch LCD button screen provides a more intuitive, simpler, and easy-to-navigate user interface. This makes control and usage easier and enables more agile interaction and response.
5. Bambu Lab A1
The Bambu Lab A1 printer is cutting-edge technology that revolutionizes the field of 3D printing. Powered by the latest advancements in additive manufacturing, this printer sets new standards in precision, speed, and versatility. With its sleek design and user-friendly interface, the Bambu Lab A1 can be seamlessly integrated into any professional workspace or personal creative studio.
Active flow rate compensation: The A1 revolutionizes flow control in 3D printing. It uses a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. The algorithm actively compensates for the flow rate based on the measurements to ensure precise extrusion.
Fully automatic calibration: The A1 performs various calibrations entirely on its own. It automatically and carefully calibrates the Z-offset, bed level, vibration resonance, and nozzle pressure for each print job.
Quick-change hotend design: The hotend can be easily plugged in and out with just one clip.
Active motor noise suppression: The A1 can calibrate parameters to compensate for tiny individual differences between the drive motors. This balances out the unwanted harshness of the motor noise.
Bed slinger with CoreXY speed and quality: Full metal rails, a rigid frame, a nozzle pressure sensor, an accelerometer, a powerful MCU, and, most importantly, an advanced motion control system utilize these features to print a 14-minute Benchy with quality while adhering to all speed Benchy rules right out of the box, without the need for special filaments.
Synchronization with Bambu Studio and Bambu Handy: Remotely control and monitor your printer via Bambu Studio or Bambu Handy. With the built-in camera, you can also capture time-lapse videos.
6. Creality K1C
Creality K1C The K1C builds on the success of the highly praised Creality K1 and is a closed-core XY FDM printer with speeds of up to 600 mm/s. The K1C is designed to compete with the best 3D printers in the industry, setting a new standard with its all-metal hotend, improved motor system, and innovative build plate. The capabilities of the K1C extend beyond PLA, as it is specifically optimized for the use of carbon fiber filament - the "C" in K1C stands for Carbon. Additionally, the K1C hotend can reach and maintain temperatures of up to 300 degrees Celsius, and its direct drive system is designed to handle carbon fiber filament with exceptional performance.
New All-Metal Extruder Kit The extruder is optimized to tightly grip the filament without slippage. The copper nozzle with a steel tip is equipped with a titanium alloy to prevent heat buildup and allow for quick changes.
Use of CF Filaments With a 300℃ hotend and a hardened steel nozzle tip, the K1C can use carbon fiber-filled filaments to print 3D models with excellent mechanical strength as well as high wear and deformation resistance.
No Vibration at High Speed The K1C can print at speeds of up to 600 mm/s while avoiding vibrations. The metal frame is extremely stable, as it contains die-cast parts with fewer seams and connections. The print head fans are dynamically balanced to rotate smoothly while cooling the hotend and during 3D printing. Additionally, the G-sensor in the print head eliminates resonance with the input shaping. Therefore, your prints will not be affected by ringing or ghosting.
Silent Mode & Air Purifier Whenever you desire peace and quiet, simply switch to Silent Mode, where the noise level is less than 4 dB.
7. Elegoo Neptune 4 Pro
With the Klipper mainboard and the 1.5 GHz ARM 64-bit quad-core processor for faster processing and command execution, the Neptune 4 Pro can print at speeds of up to 500 mm/s, allowing you to complete your printing projects quickly and efficiently. With the pre-installed Klipper firmware, you can start printing right away without needing to install new firmware.
Additionally, it supports input shaping, which eliminates artifacts and resonances on the model surface, as well as pressure advance, which predicts the nozzle pressure, resulting in more accurate and consistent extrusion with fewer filament stringing and blobbing issues.
8. Elegoo Centauri Carbon 3D Printer
The Centauri Carbon 3D printer from Elegoo is a highly advanced FDM printing system designed for precise and efficient printing results. With a generous build volume of 256 x 256 x 256 mm, this printer allows for the creation of complex and detailed objects. The innovative CoreXY technology enables a high printing speed of up to 500 mm/s, while the advanced self-calibration and automatic Z-offset ensure user-friendly operation. The printer supports a variety of materials, including PLA, PETG, TPU, ABS, ASA, and CF composites, making it a versatile choice for different applications. Equipped with a 4.3-inch touchscreen and an AI camera for real-time monitoring, the Centauri Carbon offers both ease of use and modern features that optimize the printing process.
- Maximum nozzle temperature of 320 °C for demanding materials
- Active cooling for improved print quality
- Real-time monitoring through integrated AI camera
- Versatile material compatibility for various applications
- User-friendly 4.3-inch touchscreen display.
9. Creality Ender 3 V3 SE
Stable, fast, secure: The Creality Ender-3 V3 SE is a 3D printer for objects measuring 22 x 25 x 22 cm (width x height x depth). It features a sturdy metal structure with an integrated power supply. Leveling is the foundation for print quality. The Ender-3 V3 SE is equipped with a CR-Touch sensor for automatic leveling and a strain sensor for automatic Z-offset adjustment. Just sit back and enjoy successful printing. Low-vibration components and a specially designed motherboard promote particularly quiet operation. The resume function allows for the continuation of interrupted print projects. The Ender-3 V3 SE delivers precise results for applications in medicine, architecture, model making, or industry. It has an improved user interface for a clear view of the print status. The printer supports 3D printing with PLA, TPU, and PETG filaments.
10. FlashForge Adventurer 5M
A good companion is essential during development to provide assistance. The Adventurer 5M is the perfect assistant for beginners to bring ideas to life and unlock their potential. The Adventurer 5M meets users' innovative needs with its technology and craftsmanship. Whether you are a beginner or an expert, there are no limits to your originality. No leveling tools or manual calibration and adjustment of the Z-axis are required. The Flashforge Adventurer 5M features an advanced auto-leveling system that measures the height of the nozzle in relation to the build plate, automatically and effortlessly compensating for deviations to ensure a flawless first layer. Combined with the next-generation high-speed nozzle kit, the Adventurer 5M can achieve a running speed of up to 600 mm/s while maintaining consistent operation. Unique extruder design: The Adventurer 5M is equipped with a direct drive extruder, and the improved fast-heating nozzle enhances the printing of flexible filament. Vibration compensation: Eliminates ghosting in prints, ensuring successful first layer printing. Enhanced cooling: More effective cooling through a powerful fan and a dual-channel air structure.
Product order
See all products