Best Phobya products in the Water cooling monitoring category
On this page you'll find a ranking of the best Phobya products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Phobya Thermosensor single 50cm
SMD temperature sensor with cable and 2-pin connector. This model is similar to the sensors used in thermometers available in the shop, as well as the Digital Doctor. This sensor is universally applicable in other devices as well. Cable length is approximately 50 cm.
2. Phobya Temperature sensor female/male thread G1/4 black matt
The new temperature sensor from Phobya, featuring both G1/4 internal and external threads, can be perfectly integrated into any cooling circuit with the corresponding thread size. Its simple design allows it to visually blend into any system. With a height of just 11.6 mm (excluding the threads), it occupies minimal space like no other before it. The connection is made via a two-pin standard connector.
3. Phobya Temperature sensor female/male thread G1/4
The new temperature sensor from Phobya, featuring G1/4 internal and external threads, can be perfectly integrated into any cooling circuit with the corresponding thread size. Its simple design allows it to visually blend into any system. With a height of only 11.6 mm (excluding threads), it takes up less space than any previous model. The connection is made via a two-pin standard connector.
HighFlow, with no constriction within the temperature sensor.
Compatibility:
This is a 10 kOhm temperature sensor that is compatible with the following devices, among others: aquaero 3.07, aquaero 4.00, aquastream XT Ultra, aquaduct variants with external sensor input (360 XT, 720 XT), Alphacool Heatmaster, Innovatek Fan-O-Matic, Lian Li Multipanel, Scythe Kaze, T-Balancer, and sensor inputs of many motherboards.
4. Phobya Thermosensor In-Line 2x G1/4 female thread black matt
High-precision in-line thermosensor for practically all 1/4" connections. The sensor can be integrated at any point in the cooling circuit. In the area of the sensor, the wall thickness is reduced to under 1 mm, and the sensor is insulated on the outside, allowing for precise and rapid measurements in close proximity to the water. It is universally applicable with the devices sold in the shop.
High-Flow: With an inner diameter of 1 cm, this sensor presents absolutely no constriction compared to connections and small to medium hoses. Therefore, the term "High-Flow" can certainly be applied here!.
5. Phobya Flow sensor cable 3 pole 80cm black sleeved
Three-wire cable for connecting the flow sensor to fan controllers or readout devices. Length approximately 80 cm, with plugs on both sides (special plug on the sensor). If necessary, the cable can be extended with standard 3-pin fan extension cables.
6. Phobya Thermosensor single 90cm
SMD temperature sensor with cable and 2-pin connector. This model is similar to the sensors used in the thermometers available in the shop as well as the Digital Doctors. This sensor is also universally applicable in other devices. Cable length is approximately 90 cm.
Compatibility: This is a 10 kOhm temperature sensor that is compatible with the following devices, among others: aquaero 3.07, aquaero 4.00, aquastream XT Ultra, aquaduct variants with external sensor input (360 XT, 720 XT), Alphacool Heatmaster, Innovatek Fan-O-Matic, Lian Li Multipanel, Scythe Kaze, T-Balancer, and sensor inputs of many motherboards.
7. Phobya Thermosensor single 50cm black sleeved
SMD temperature sensor with cable and 2-pin connector. This model is similar to the sensors used in the thermometers available in the shop as well as in the Digital Doctors. This sensor is universally applicable in other devices as well. Cable length is approximately 50 cm.
Compatibility:
This is a 10 kOhm temperature sensor that is compatible with the following devices, among others:
Aquaero 3.07, Aquaero 4.00, Aquaero 5, Aquastream XT Ultra, Aquaduct variants with external sensor input (360 XT, 720 XT), Alphacool Heatmaster, Innovatek Fan-O-Matic, Lian Li Multipanel, Scythe Kaze, T-Balancer, sensor inputs of many motherboards.
8. Phobya 4Pin PWM to 3Pin Transformer Single
Controlling 3-pin fans via a PWM signal was an insoluble problem until now. Phobya has taken on this problem and presents with the 4-pin PWM to 3-pin converter an elegant and easy to use solution. With the 4-Pin PWM to 3-Pin transformer all 3-Pin fans can now be controlled via a normal PWM signal. To do this, connect the converter to your mainboard or your PWM fan controller while you connect the fan to the converter. Now your 3-pin fan can be controlled like any other PWM fan. The converter recognises the PWM signal and controls the 3-pin fan with an appropriate voltage. This way you can control your fans easily and simply. The converter is able to supply an output voltage of 1A, which corresponds to 12W. This means that you can use a Y-splitter to control several fans simultaneously via the converter. Technical Details: Dimensions (LxWxH): 50 x 39 x 18mm Connector: 1x 4 Pin / 1x 3 Pin Power connector: 4 Pin Connector Mounting: Double sided adhesive tape for mounting on/in the case 4 Pin PWM to 4 Pin PWM Cable: black sleeved 50cm Included in delivery: Phobya 4Pin PWM to 3Pin Transformer Single .
9. Phobya Thermosensor single 80cm black sleeved
SMD temperature sensor with cable and 2-pin connector. This model is similar to the sensors used in the thermometers available in the shop as well as in the Digital Doctors. This probe is also universally applicable in other devices. Cable length is approximately 80 cm.
Sleeving:
This cable is not only practical but also visually appealing. The surrounding mesh that wraps around the actual cables is very dense and provides exactly the effect that professional sleevers desire: a complete transformation of the cables to better emphasize the uniqueness of their system. Special attention has been paid to the combination of the cable sleeve, the connector, and the heat shrink tubing, ensuring they create a cohesive look.
Compatibility:
This is a 10 kOhm temperature sensor that is compatible with the following devices, among others:
- aquaero 3.07
- aquaero 4.00
- aquaero 5
- aquastream XT Ultra
- aquaduct variants with external sensor input (360 XT, 720 XT)
- Alphacool Heatmaster
- Innovatek Fan-O-Matic
- Lian Li Multipanel
- Scythe Kaze
- T-Balancer
- Sensor inputs of many motherboards.
