Best EKWB products in the Water cooling monitoring category
On this page you'll find a ranking of the best EKWB products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. EKWB EK-Loop Connect temperature sensor, G1/4 inch - nickel
The measurement of water temperature serves two functions in a custom water cooling system: First, it is the best indicator of cooling performance, making it suitable for precise control. Second, some control devices allow for temperature-dependent regulation of the pump and connected fans.
To this end, EKWB offers this practical EK-Loop Connect temperature sensor, which simply screws into a G1/4-inch fitting and seals it like a plug. It can be used, for example, on the radiator, reservoir, or a T-piece.
The silver-colored fitting of the temperature sensor is fully encapsulated and galvanized, eliminating any issues with corrosion. The connection cable with a 2-pin connector is 500 mm long. EKWB adheres to the common standard, ensuring compatibility with many devices available on the market.
Technical details:
- Diameter: 16.5 mm
- Height after installation: 8 mm
- Material: nickel-plated brass (fitting), EPDM 50 (seal ring)
- Connection: 1x G1/4 inch external thread, 1x 2-pin
- Temperature sensor: NTC, 10 KΩ at 25 °C
- Temperature measurement range: 0 °C to 90 °C
- Cable length: 500 mm.
2. EKWB EK-Quantum Scalar Flowmeter Bottom-To-Top D-RGB
The EK-Quantum Scalar Flow Indicator is a high-quality GPU-mounted flow indicator with addressable D-RGB lighting. It visually represents the coolant flow rate, which can often be difficult to see with the naked eye. This can be very useful for quickly determining whether your loop is functioning properly or if there are issues with the pump or flow. It features dedicated G1/4" inlets and outlets. It is essential to connect the labeled ports correctly. This product is compatible with the common RGB synchronization technologies of all major motherboard manufacturers. The anodized aluminum cover conceals the LED hotspots and ensures even lighting. Enclosed: EK-Quantum Scalar Flow Indicator Bottom-Top D-RGB - Black G1/4" nickel-plated brass plug x 1.
3. EKWB EK Quantum Scalar Flowmeter Top-To-Bottom D-RGB - Nickel
The EK-Quantum Scalar Flow Indicator is a high-quality GPU-mounted flow indicator with addressable D-RGB lighting. It visually represents the coolant flow rate, which is often difficult to discern with the naked eye. This can be very useful for quickly determining whether your loop is functioning properly or if there are issues with the pump or flow. It features dedicated G1/4" inlets and outlets. It is essential to connect the labeled ports correctly. This product is compatible with the common RGB synchronization technologies from all major motherboard manufacturers. The anodized aluminum cover conceals the LED hotspots and ensures even lighting. Enclosed: EK-Quantum Scalar Flow Indicator Bottom-Top D-RGB - Nickel G1/4" nickel-plated brass plug x 1.
4. EKWB EK-Quantum Scalar Flowmeter Bottom-To-Top D-RGB - Nickel
The EK-Quantum Scalar Flow Indicator is a high-quality GPU-mounted flow indicator with addressable D-RGB lighting. It visually represents the coolant flow rate, which is often difficult to discern with the naked eye. This can be very useful for quickly determining whether your loop is functioning properly or if there are issues with the pump or flow. It features dedicated G1/4" inlets and outlets. It is essential to connect the labeled ports correctly. This product is compatible with the common RGB synchronization technologies of all major motherboard manufacturers. The anodized aluminum cover conceals the LED hotspots and ensures even lighting. Enclosed: EK-Quantum Scalar Flow Indicator Bottom-Top D-RGB - Nickel G1/4" nickel-plated brass plug x 1.
5. EKWB EK Quantum Scalar Flowmeter Top-To-Bottom D-RGB
The EK-Quantum Scalar Flow Indicator is a premium GPU-mounted flow indicator featuring addressable D-RGB implementation. It visually represents the coolant flow, which can often be difficult to discern with the naked eye. This can be very useful for quickly identifying whether your loop is functioning normally or if there are issues with the pump or flow. Additionally, it seamlessly integrates into your GPU block and backplate due to its aesthetically pleasing black anodized aluminum cover that matches the finish of the GPU water block backplate.
It features dedicated G1/4-inch inlet and outlet ports. It is essential to follow the proper setup as the connections are labeled. Please read the manual before installation. This variant has a flow pattern from top to bottom, indicating the direction the liquid should flow. The flow indicator has a unique impeller body with a closed center and angled blades that prevent air from getting trapped inside the display.
This product is compatible with common RGB synchronization technologies from all major motherboard manufacturers. The arrow marking on the 3-pin addressable LED connector must align with the +5V marking on the D-RGB (A-RGB) header. To adhere to the EK Quantum design language, an anodized aluminum cover is used to conceal the LED hotspots and ensure uniform lighting across the entire device. Inside the housing, there are a total of 2 LEDs.
This flow indicator is made from CNC-machined acrylic casting material with an anodized aluminum cover that features the same finish as the EK-Quantum Vector GPU backplates.
6. EKWB EK-Loop Connect Level Sensor TBE 60 Level Sensor
The EK-Loop Connect Level Sensor TBE 60 is a level sensor designed for round or cylindrical expansion tanks. With its practical mounting mechanism, it can be easily attached to the expansion tank and emits a warning signal as soon as the coolant level falls below a defined point. This effectively prevents the pump from running dry due to evaporation or malfunction, thereby protecting the system from damage.
Note: An EK-Loop Connect Controller is required for connection and operation. This is not included in the delivery.
Technical Details:
- Connection: 4-pin
- Cable Length: 50 cm
- Compatibility with Expansion Tanks: Cylinders with a diameter of 60 mm
Delivery Includes:
- Level Sensor TBE 60
- USB Cable, approximately 70 cm
- Instructions.
