Best selling Relays from Eltako
On this page you’ll find a ranking of the best Relays from Eltako. To give you a quick overview, we’ve added the most important product details. This page always stays fresh and updates automatically.
1. Eltako Impulse switch
1 switch and 1 opener, potential-free, 16A/250V AC, suitable for 230V LED lamps up to 200W and incandescent lamps up to 2000W. No standby loss. Rail-mounted device for installation on DIN-EN 60715 TH35 mounting rail. 1 division unit = 18mm wide, 58mm deep. Either universal control voltage 12-230V UC at the control input +A1/-A2 or 230V with up to 5mA glow lamp current at the control input (L)/-A2(N). The simultaneous use of two potentials at the control inputs is not permitted. Very low switching noise. No continuous power supply required, hence no standby loss. State-of-the-art hybrid technology combines the advantages of wear-free electronic control with the high performance of special relays. By using a bistable relay, there is no coil loss and no heating even when switched on. The relay contact can be open or closed at startup and will synchronize during the first operation. The terminal connection layout is identical to the electromechanical pulse switch S12-110-. If this pulse switch is in a circuit monitored by a field disconnector, no additional base load is required. However, the monitoring voltage must be set to maximum. The electronics have no independent power supply and therefore consume no power in either contact position. Only during the brief control pulse of just 0.2 seconds does the control current flow, activating the microcontroller. It reads the last switching state from its non-volatile memory, switches the bistable relay accordingly in the opposite direction, and writes the new switching state back to memory.
2. Eltako Koppelrelais
Coupling relay. No standby loss. The latest hybrid technology combines the advantages of wear-free electronic control with the high performance of special relays. Control display with LED. Control power requirement only 0.2W. Safe isolation in accordance with VDE 0106, Part 101, therefore also suitable for use as a coupling relay.
3. Eltako Eud12npn-Uc
Universal dimmer switch with automatic lamp detection. Standby loss is only 0.1 watts. Minimum or maximum brightness and dimming speed are adjustable. Equipped with a children's room and snooze function. The dimmer switch is dependent on ventilation conditions and supports dimmable energy-saving lamps as well as dimmable 230V LED lamps, depending on the lamp electronics. The switching occurs at zero crossing with soft on and soft off for lamp protection. There is a universal control voltage that is galvanically isolated from the supply and switching voltage. No minimum load is required. Short control commands turn the light on or off, while continuous control adjusts the brightness to the maximum value. Interrupting the control changes the dimming direction. The set brightness level is saved when switched off. In the event of a power failure, the switching position and brightness level are saved and may be turned on again when the supply voltage returns. From 110V control voltage, the glow lamp current is 5mA. An automatic electronic overload protection and over-temperature shutdown are also included.
4. Eltako Switching relay
Eltako Switching Relay for Rail-Mounted Devices R12-100-8V
Manufacturer: Eltako
Designation: Switching Relay for Rail-Mounted Devices
Type: R12-100-8V
Function: Other
Mounting Type: DIN Rail
Width in Division Units: 1
Installation Depth: 55 mm
Number of Contacts as Normally Open: 1
Control Voltage 1: 8 V
Control Voltage Type 1: AC
Frequency of Control Voltage 1: 50 Hz
Rated Current: 16 A
Supply Voltage: 230 V
Type of Supply Voltage: AC
Max. Incandescent Lamp Load: 2300 W
Max. Fluorescent Lamp Load: 2300 VA
Max. Fluorescent Lamp Load (Duo Circuit): 2300 VA
Max. Fluorescent Lamp Load (Parallel Compensated): 500 VA
Max. Switching Current (cos phi 0.6): 10 A
Additional Details: 1-pole 16A/250V AC. Rail-mounted devices for installation on mounting rail DIN-EN 60715 TH35 with manual operation and switching position indication. 1 division unit = 18 mm wide, 55 mm deep. Duty cycle 100%. Control power requirement 1.9 W. Contacts: 1 Normally Open. Contact Distance: 3 mm. Test Voltage Contact/Contact: 2000 V and Test Voltage Control Connections/Contact: 4000 V. The compatible electronic switching relays ER12DX-UC, ER12-200-UC, and ER12-110-UC can also be used. The universal control voltage UC covers the voltage range of 12-230 V AC 50-60 Hz and 12-230 V DC. EAN: 4010312200414.
5. Eltako Switching relay 230V. 4 NO contact 16A/250V AC
The Eltako relay R12-400-230V is a reliable electromechanical device designed for mounting on DIN rail according to DIN-EN 60715 TH35. With a rated voltage of 230V and a maximum switching current of 16A, this relay is ideal for various applications in electrical engineering. It features four normally open contacts that allow for precise control. Manual operation and a switching position indicator provide additional user-friendliness and control. The device is designed for a duty cycle of 100%, meaning it can be operated continuously without the risk of overheating. The high test voltages of 2000V between the contacts and 4000V between the control terminals and the contacts ensure high safety and reliability in operation.
- 4-pole with 4 normally open contacts
- Duty cycle of 100%
- Manual operation and switching position indicator
- High test voltage for safety: 2000V contact/contact and 4000V control terminals/contact
- Suitable for mounting on DIN rail DIN-EN 60715 TH35.
6. Eltako Multifunction time relay
Digital adjustable multifunction time relay with 18 functions. Standby loss is only 0.05 to 0.5 watts. Simply connect the neutral conductor to terminal (N) and the live conductor to terminal 15 (L). This results in an additional standby consumption of only 0.1 watts. Universal control voltage of 8 to 230 V AC. Supply voltage matches the control voltage. Both the function and the times are entered with a button press and displayed digitally on an LCD. Only two buttons need to be operated for this. When setting the time, all values can be entered within the selected time frames (0.1 to 9.9 or 1 to 99 seconds, minutes, or hours). The maximum time is 99 hours. Up to 600 time settings are possible. The entered time(s) is (are) continuously displayed digitally. By using a bistable relay, there is no coil loss and no heating even when switched on. After installation, wait for the automatic short synchronization.
7. Eltako Shock switch 230V. 1 NO + 1 NC 25A/250V AC
The Eltako current relay switch is an electromechanical device designed for controlling electrical loads in various applications. With a nominal voltage of 230V and a maximum output current of 25A, this step switch is ideal for use in residential and commercial installations. The switch features manual operation and a switching position indicator, allowing for easy handling and monitoring of the switching status. The 100% duty cycle ensures reliable operation, while the control power requirement of only 5-6W ensures energy-efficient use. The contact gap of 3mm provides safe separation of the contacts and enhances operational safety. The switch is suitable for mounting on a DIN rail according to DIN-EN 60715 TH35 and occupies only a width of 18mm.
- 100% duty cycle for continuous operation
- Manual operation and switching position indicator for easy handling
- Low control power requirement of 5-6W
- Suitable for mounting on DIN rail according to DIN-EN 60715 TH35
- Contact gap of 3mm for increased safety.
8. Eltako Electron. impulse switch.
1 switch 16 A/250 V AC, 230 V LED lamps up to 200 W, incandescent lamps 2000 W. Standby loss only 0.3 W. Modular device for mounting on DIN-EN 60715 TH35 mounting rail. 1 module unit = 18 mm wide, 58 mm deep. Control voltage 230 V AC at control input A1. Very low switching noise. The terminal connection layout is compatible with the electromechanical pulse switch S12-100.
9. Eltako ER12SSR-UC Solid-state relay DIN rail, top-hat rail Switching capacity (max.) 400 W
Noiseless solid-state relay, 400 watts. No stand-by loss. Modular device for DIN-EN 60715 TH35 rail mounting. 1 module = 18 mm wide, 58 mm deep. Universal control voltage: 8..230 V UC. Control display with LED. Switching voltage 230 V AC. Contact switching at zero crossing. With automatic electronic overtemperature shutdown. At one load Main features Product color Blue, White Power AC output voltage 230 V DC Voltage range 8 - 230 V.
Relays
EUR47,–
Eltako ER12SSR-UC Solid-state relay DIN rail, top-hat rail Switching capacity (max.) 400 W
10. Eltako FGTZ-230V
Eltako Wireless Garage Door FGTZ-230V
Manufacturer: Eltako
Description: Wireless Garage Door Plug
Type: FGTZ-230V
KNX Bus System: no
KNX Wireless Bus System: no
Wireless Bus System: yes
LON Bus System: no
Powernet Bus System: no
Other Bus Systems: none
Bidirectional Wireless: yes
Mounting Type: Plug
Local/Manual Operation: no
With LED Display: no
Max. Switching Power: 30 W
Suitable for C-Load: no
Max. Number of Switching Outputs: 1
Max. Switching Current: 1 A
Rated Current: 16 A
Rated Operating Voltage: 230 V
Connectable Different Phases: no
With Bus Coupling: yes
Bus Module Removable: no
Modular Expansion Option: no
Protection Class (IP): IP20
Eltako Wireless Garage Door FGTZ-230V: Additional Details
Wireless garage door plug. Dimensions: 100x55x45 mm (without plug), pure white. With potential-free switching contact output for a maximum of 30 V/1 A. Encrypted wireless, bidirectional wireless, and repeater function can be activated. Standby loss is only 0.8 W. Smart Home sensor. Plug for German safety sockets with increased touch protection. The safety socket (16 A) is directly connected to the safety plug, so no power outlet is blocked, and the power plug of the garage door opener can be plugged in directly here. To control the garage door opener with additional wireless buttons, its terminal connections for an external potential-free button (contact) are connected to the plug-in screw terminals of the potential-free switching contact output of the actuator. Only safety low voltage (SELV) may be switched! With the convenient tap technology, up to 24 wireless universal buttons and wireless direction buttons can be learned. For the wireless direction button to function as such, a wireless window-door contact must also be learned, which reports whether the garage door is open or closed.
EAN: 4010312324462.
Product order
See all products