Best selling PC case from Montech
On this page you'll find a ranking of the best Montech products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Montech Xr
The XR from Montech is a midi tower with a very elegant front I/O together with a design that resembles wood grain. It is also optimised for airflow and comes with a total of three integrated, powerful ARGB PWM fans ex works. With this, the manufacturer sets the basis for every gaming computer that focusses on cooling performance. The case consists of a sturdy steel construction with a tempered glass side panel and front. The lid, the side of the power supply compartment and the rear side panel are fitted with a fine mesh. The high air permeability benefits the cooling of your components.
Both advocates of air cooling and water cooling enthusiasts will get their money's worth with this case: the Montech XR offers options for installing a total of nine fans. Instead of on the front, two powerful 120 mm fans are pre-installed on the side. Three 120 mm fans can be installed on the lower power supply cover. A 120 mm fan is also pre-installed at the rear. All three of the Montech fans can be controlled via PWM signal and have ARGB lighting. Three 120 mm or two 140 mm fans can be retrofitted in the lid. The height of the CPU cooler is limited to a maximum of 175 mm.
Montech has also made provisions for fans of AiOs or custom water cooling systems. Up to 240 mm radiators can be mounted on the side. There is space on the lid for a radiator up to 360 mm in size. Thanks to the generous mesh surfaces, plenty of air can get in and out of the housing. To ensure the long-term effectiveness of your cooling and simplify the cleaning of your fans, additional dust filters are attached to the side and base. You can easily remove, clean and replace them.
The interior offers an exceptional amount of space for powerful hardware, for example for ATX mainboards and high-performance gaming graphics cards up to 420 mm in length. The graphics card can also be installed vertically using the optional PCI bracket from Montech. Two 2.5-inch SSDs can be attached to the rear of the mainboard tray in the corresponding brackets.
2. Montech Air 100 Black
The AIR 100 series is the first Micro-ATX case from Montech's highly acclaimed AIR series of PC cases. Its smaller footprint makes it easy to transport and takes up much less space.
Despite the smaller form factor, the AIR 100 does not compromise on achieving the best possible cooling performance. The expandability and anti-dust features also meet the standards of Montech's AIR series. Combined with a clear, minimalist design, the AIR 100 offers PC users a smooth and elegant, yet powerful building experience.
3. Montech Air 903 Base
Introducing the Montech AIR 903 series – the ultimate upgrade for PC enthusiasts. It offers outstanding aesthetics, unparalleled airflow, great attention to detail, and exceptional compatibility.
4. Montech King 95 Pro
Step into the future with the KING series from Montech – the epitome of high-quality materials and cutting-edge design. KING is the result of our relentless pursuit of quality and innovation, seamlessly combining premium materials with distinctive aesthetics. Whether you are a forward-thinking gamer or a visionary developer striving for excellence, the KING series is designed to meet and exceed all your technical desires.
This collection embodies our unwavering commitment to excellence. The KING 95, our flagship product, stands as a symbol of our steadfast dedication to quality. With its captivating exterior design and groundbreaking features, the KING series promises to immerse you in a world full of technology-driven excitement.
5. Montech X3
Main Features
Design
Form Factor: Midi Tower
Type: PC
Product Color: Black
Supported Motherboards
Form Factors: ATX, micro ATX, Mini-ITX
Number of 3.5" Expansion Slots: 2
Number of 2.5" Expansion Slots: 2
Number of Expansion Slots: 7
Side Window: Yes
Suitable for Gaming: Yes
Lighting: Yes
Lighting Colors: Multi
Lighting Location: Rear, Front, Top
Tempered Glass Panels: Yes
Anti-Dust Filter: Yes
RGB Control Button: Yes
Maximum CPU Cooler Height: 16 cm
Maximum Graphics Card Length: 30.5 cm
Maximum PSU Length: 16 cm
Power Supply
Power Supply Included: No
Number of Power Supply Units: 1
Connections and Interfaces
Number of USB 2.0 Ports: 2
USB 3.2 Gen 1 (3.1 Gen 1) Type A Ports: 1
Audio Ports: Yes
Audio Output: Yes
Cooling
Installed Fans (Front): 3x 140 mm
Maximum Supported Front Fans: 3
Supported Front Fan Diameters: 120, 140 mm
Installed Fans (Rear): 1x 120 mm
Maximum Supported Rear Fans: 1
Supported Rear Fan Diameter: 120 mm
Installed Fans (Top): 1x 120 mm
Maximum Supported Top Fans: 2
Supported Fan Diameter (Top): 120 mm
Maximum Supported Bottom Fans: 2
Supported Bottom Fan Diameter: 120 mm
Storage Medium
Supported Hard Disk Drive Sizes: 2.5, 3.5" HDD/SSD Combo Case: Yes
SSD Form Factor: 2.5"
Maximum Supported Number of HDDs: 2
Weight and Dimensions
Width: 210 mm
Depth: 370 mm
Height: 480 mm
Weight: 5.42 kg
Packaging Data
Packaging Width: 265 mm
Packaging Depth: 530 mm
Packaging Height: 425 mm
Package Weight: 6.28 kg.
6. Montech HS01 (weiss, Tempered Glass)
7. Montech X3 Mesh
The Montech X3 Mesh Midi Tower is the ideal foundation for your custom-built gaming PC. The PC case comes with robust airflow cooling right out of the box, allowing you to focus on installing your preferred gaming hardware. At the same time, it is expandable, so you can transform it into your very own gaming setup. Additionally, it looks great, thanks in part to the tempered glass side panel on hinges.
8. Montech King 65 PRO
With the Montech KING 65 Pro, Montech offers a simple yet attractive PC case for gamers and hardware enthusiasts. The midi tower is equipped with sophisticated air cooling ex works so that you can concentrate on installing your favourite gaming hardware. The case also impresses with its minimalist and clean look, especially thanks to the front and side panels made of tempered glass, which fit together seamlessly.
The total of three pre-installed fans in the Montech KING 65 Pro ensure plenty of airflow, which is also supported by the large mesh integrated into the right-hand side panel and the lid. Two 140 mm ARGB PWM fans are installed on the side, which can be replaced by two 120 mm fans. There is space under the lid for three 120 mm or two 140 mm fans. A further 120 mm ARGB PWM fan is pre-installed at the rear. Up to three 120 mm or two 140 mm fans can be installed on the base to improve the cooling of your graphics card. The CPU can be fitted with a cooler up to 175 mm high.
The Montech KING 65 PRO offers plenty of space for sophisticated gaming hardware. The housing supports mainboards up to the ATX form factor. Graphics cards attached to it can be up to 420 mm long. There is a drive cage for either two 3.5-inch HDDs or three 2.5-inch SSD drives. Two additional 2.5-inch SSDs can be attached to the rear of the mainboard tray.
The IO panel on the side features a USB-C port, two USB 3.0 ports and a 3.5 mm socket for a microphone and headphones, as well as a switch to control the lighting. A hub for controlling the lighting and fan speed is pre-installed in the Montech KING 65 PRO.
9. Montech King 95
Step into the future with the KING series from Montech – the epitome of high-quality materials and cutting-edge design. KING is the result of our relentless pursuit of quality and innovation, seamlessly combining premium materials with distinctive aesthetics. Whether you are a forward-thinking gamer or a visionary developer striving for excellence, the KING series is designed to meet and exceed all your technical desires.
This collection embodies our unwavering commitment to excellence. The KING 95, our flagship product, stands as a symbol of our steadfast dedication to quality. With its captivating exterior design and groundbreaking features, the KING series promises to immerse you in a world full of technology-driven excitement.
10. Montech AIR 903 MAX B
Introducing the Montech AIR 903 series – the ultimate upgrade for PC enthusiasts. It offers outstanding aesthetics, unparalleled airflow, meticulous attention to detail, and exceptional compatibility. Experience the innovative AIR 903 case with a metal front panel and an impressive ventilation rate of 51%.
