Best QNAP products in the NAS accessories category
On this page you'll find a ranking of the best QNAP products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. QNAP QXG-10G1T
The QXG-10G1T from QNAP is equipped with the Aquantia AQtion AQC107 NIC, which supports speeds of 10, 5, 2.5, 1 Gbps, and 100 Mbps. The RJ45 connector allows for the continued use of existing cables. In combination with Cat 5e cables, the network environment can achieve transmission speeds of up to 5 Gbps, while using Cat 6a cables enables speeds of up to 10 Gbps.
2. QNAP 2U rail kit
QNAP rail kits assist with the rack mounting of QNAP NAS devices. Thanks to the sliding rails, you can easily slide the QNAP NAS in and out for maintenance and management. QNAP's rackmount NAS models comply with the ANSI/EIA-RS-310-D rack mounting standards. Please ensure that any server racks you purchase meet the corresponding specifications.
- A. Distance between mounting posts: ≥ 451 mm
- B. Device width including mounting rails: ≥ 485 mm
- C. Rack depth: 443 – 815 mm
- D. The distance between two rack posts (measured from the center of the square holes in the rack) is 465 mm.
3. QNAP TL-R1200S-RP
The TL-R1200S-RP Rackmount JBOD expansion enclosure allows you to back up and expand your QNAP NAS, Windows, and Ubuntu computers and servers. The TL-R1200S-RP features twelve 3.5-inch SATA 6Gb/s drive bays. It comes with a QXP PCIe card for connecting the enclosure using an SFF-8088 (or SFF-8644) cable. It provides reliable read/write performance for smooth storage and backup tasks.
The TL SATA JBOD supports Multi-Lane SATA 6Gb/s transmission, with each SATA lane directly connected to an individual SATA drive to enhance performance. With the 1-to-1 high-speed channel, the TL SATA JBOD delivers excellent transfer performance.
The TL-R1200S-RP offers software-controlled storage configurations for greater management flexibility. You can configure RAID and monitor the status of the JBOD enclosure.
4. QNAP TL-D800C Expansion Unit
The TL-D800C JBOD storage enclosure allows you to back up and expand your QNAP NAS. The TL-D800C features eight 3.5-inch SATA drive bays with 6 Gb/s and USB 3.2 Gen2 (10 Gbps) Type-C connectivity to provide a fast and seamless expansion solution.
5. QNAP QM2-2P-344A QM2 Card
QNAP QM2-2P-344A. Host interface: PCIe, output interface: M.2, expansion card standard: PCIe 3.0. Product color: Brown, Gray, purpose: NAS / Storage server, cooling: Active. Maximum data transfer rate: 32 Gbit/s. Width: 68.9 mm, depth: 170.5 mm, height: 19.3 mm. Quantity per pack: 1 piece.
Connections and interfaces:
- Host interface: PCIe
- Output interface: M.2
- Expansion card standard: PCIe 3.0
- NVMe: Yes
Design:
- Built-in: Yes
- Product color: Brown, Gray
- Purpose: NAS / Storage server
- Cooling: Active
- Number of fans: 1 fan
- Number of expansion slots: 2
- LED indicators: Yes
Features:
- Maximum data transfer rate: 32 Gbit/s
Weight and dimensions:
- Width: 68.9 mm
- Depth: 170.5 mm
- Height: 19.3 mm
Packaging data:
- Quantity per pack: 1 piece
Other functions:
- Interface: PCIe Gen3 x 4.
6. QNAP QM2-4P-384
QM2 enhances performance by adding M.2 SSDs. It does not occupy any 3.5-inch drive bays, allowing you to maximize both your storage capacity and performance.
7. QNAP DUAL M.2 SQM2-2P-244A
The QM2 series PCIe cards offer support for M.2 SSDs on a QNAP NAS, allowing users to configure SSD caching, a caching pool, or an auto-tiering volume to enhance overall NAS performance. QM2 boosts performance by adding M.2 SSDs. It does not occupy 3.5-inch drive bays, enabling you to maximize both your storage capacity and performance.
8. QNAP TR-002
The TR-002 is an ideal storage expansion solution for PCs, especially laptops, where higher capacity drives cannot be installed. The TR-002 supports RAID configurations and offers the ability to store numerous files and data to ensure protection against possible hard drive failures.
The TR-002 can also be used as a DAS (direct-attached storage) device, allowing direct access to the content by simply connecting it via USB. The TR-002 has two 3.5-inch SATA drive bays with USB 3.2 Gen 2 Type-C connectivity to provide a highly reliable and secure solution for expanding storage capacity.
- USB 3.2 Gen 2 (10Gbps) - USB 3.2 Gen 2 Type-C connector for faster data transfer (Note: A USB cable of maximum 1m length is recommended).
- Supports SATA drives - Supports up to two SATA drives.
- Hard drive mode DIP switch - Hard drive mode DIP switch to switch between hardware control and software control configurations to set the RAID group.
- Lockable drive bays - Lockable hard drive bays to prevent accidental removal of the drives.
- Easy Eject - Eject button to disconnect the TR-002 from a NAS or computer (Note: Requires the QNAP External RAID Manager utility:
9. QNAP FAN-9CM-T01 92x92x25mm fan 12V 4PIN
The QNAP FAN-9CM-T01 is a powerful case fan specifically designed for use in NAS systems. With a diameter of 92 mm and a maximum rotation speed of 2400 RPM, this fan provides efficient cooling and contributes to the optimal performance of your devices. The fan operates at a voltage of 12 V and features a 4-PIN connector, allowing for easy integration into various systems. The FAN-9CM-T01 is not only functional but also comes in a sleek black design, making it an aesthetic addition to any setup. It is compatible with a variety of QNAP models, making it a versatile choice for users of QNAP NAS systems. This fan is an essential accessory for anyone looking to maximize the lifespan and performance of their devices.
- Maximum rotation speed of 2400 RPM for efficient cooling
- Compatible with various QNAP NAS models
- Easy integration thanks to the 4-PIN connector
- Sturdy construction for reliable operation.
NAS accessories
−26%
only 3 of 3 remaining on sale
EUR16,13 was EUR21,90
QNAP FAN-9CM-T01 92x92x25mm fan 12V 4PIN
10. QNAP Rail Kit support rack-post 4.96" 16.34
QNAP rail kits assist with the rack mounting of QNAP NAS devices. Thanks to the sliding rails, you can easily pull the QNAP NAS in and out for maintenance and management. QNAP's rackmount NAS models comply with the rack mounting standards ANSI/EIA-RS-310-D. Please ensure that any server racks you purchase meet the appropriate specifications before buying.
