EUR505,60
Ubiquiti UniFi AP AC NanoHD set of 3
1733 Mbit/s
Questions about Ubiquiti UniFi AP AC NanoHD set of 3
What would you like to know?
0 questions and answers
Thank you for the info! However, you can report incorrect specifications directly yourself. Product page -> Specifications -> Show more -> Scroll down -> Report wrong data -> And then change the corresponding entry.
Helpful answer
Yes, it is included but with a eu plug. I only saw it now.
Helpful answer
nanoHD ist Gen. 3 https://help.ubnt.com/hc/en-us/articles/360012192813#3
Helpful answer
Hi DargonSniper, I don't have a detailed insight into how UNIFY configure their products in HW and FirmWare and have implemented the FW stack. Even more difficult to estimate how apps in the respective OS are set up here. In general, increasing the bandwidth of the channels often helps with the transmission speed, and 2.4GHz always manages more anyway (5GHz is used for connectivity to minimise areas without reception). with the "Network Signal Info" app, my AP NanoHD managed 360MBit adhoc on an S22+... similar on my U6LR... if you are assigned a different channel in the mesh by changing the position in the housing, then the transmission speed will fluctuate somewhat because by default the UNIFY AP also adjusts its bandwidths to the number of connected devices and neighbouring channels. VG, Martin
Helpful answer
Yes, apart from the very first generation, all Unifi access points can have their uplink via radio: https://community.ui.com/questions/Missing-Wireless-Uplink-with-nanoHD/d5705c36-243f-4a82-9467-e95d9d6b42fd
I also have the set of 3. They are the same as the single product.
Simply connect a power strip with a switch between the power plug and the power supply and switch it off in the evening and on again in the morning...
To configure, you need a CloudKey or UDMPro/UDM. Then either connect them all to one switch.... or, once set up, you can also have the APs meshed with each other. Power would be needed anyway. Therefore, the cleanest way is to connect via POE with Cat. The whole thing is then easy to configure via the Cloudkey or UDM/Pro (networks, guest WLAN network, etc.).
Helpful answer
Yes, you can.
Helpful answer
There are many comparisons of both APs on the net. The following video compares 3 situations with measurements: https://www.youtube.com/watch?v=wzpdvUPxjYc Enjoy!
In my case, a POE injector was included in the scope of delivery. It works wonderfully with it. Alternatively, the Ubiquiti Unifi Switch US-8-60W would also come into question.
Helpful answer
Hello Florian. AP(stands for Access Point) NanoHD is effectively "only" an access point and intended as a component in a more complex network. From your modem onwards, you need at least the following for a functioning WLAN: - UniFi Security Gateway (the actual router) - PoE Injector (included with the AP) - A machine running the controller software (e.g. UniFi Cloud Key, Raspi or other PC, Mac), which does not always have to be running, but at least for configuration and updates. Overall, the system is very flexible, stable and reliable. However, you should have a little experience with networks to set it up. A "plug and play" approach is not likely to work here. If you don't trust yourself to do that, I would rather look for a mesh system.
Since a set price does not automatically adjust to the individual prices, it may happen that the set price is higher after a reduction of the individual price than if the individual items were ordered separately. According to the information available to us, the scope of delivery of the set does not differ from that of the individual product, except for the number of items.
Helpful answer
No, the terminal can be set up with a mobile phone for example. See here under Standalone Mode: https://help.ubnt.com/hc/en-us/articles/115012360487
Helpful answer
Mesh is unfortunately only supported by devices that can do mesh. Although it says in the Control Centre to allow mesh with other devices, my experience is that it does not always work one hundred percent.
Helpful answer
Hello Unifi APs can only be managed through a controller. Whether it is the software version you used or via the Unifi Cloud Key which is a small box that allows you to manage a large part of the Ubiquiti hardware.
This has to do with supply demand I guess
The last 3 times I ordered Ubiquiti material the connectors were "forgotten", contact customer service. They will order the cables for you free of charge. https://www.srf.ch/news/schweiz/starkstrominspektorat-ruegt-mehr-elektrogeraete-mit-verbotenen-steckern
Ubiquiti usually includes a PoE injector with the individual item. Is that really not the case here?
Helpful answer
The PoE injector is included with the single item, but with an EU cable, there is no CH cable or adapter included.
23 of 23 questions