jes, but needs work to make everything tight

Yes, a graphics card up to 375 mm in length can be installed in the housing. Depending on the model, the Nvidia RTX 5070 usually has a length of less than 375 mm, so installation is possible as long as the specific model does not exceed this length. The housing supports graphics cards with a maximum length of 375 mm and a maximum width of 75 mm.

Yes, a graphics card such as the RTX 5070 can be installed in the housing as long as it is no longer than 375 mm. The maximum graphics card length is 375 mm, which is sufficient for most RTX 5070 models. The graphics card is mounted vertically and the case supports modern GPUs with a PCIe 4.0 riser cable.

Yes is possible However, only standard radiator no thicker ones such as from Arctic

The Hyte Y60 comes with three pre-assembled fans: - Two 120 mm fans in the lower chamber. - One 120 mm fan at the rear of the case.

2x 120mm are also possible

yes, with this Silverstone SST-PP08 Power Adapter Cover for SFX to ATX

Correct. The three fans are included. One at the back and two at the bottom. The other product is a riser cable. It is used to mount the graphics card vertically. Normal mounting is not possible.

I have this setup. It was the biggest mistake ever. I have the AORUS GeForce RTX 4080 16GB MASTER. The card fits, but there is only about 2mm space between the glass and the card. This leads to overheating. I left the case open for six months until the solution arrived. A custom acrylic panel with perforation: https://www.etsy.com/ch/listing/1486764631/hyte-y60-custom-beluftetes-seitenteil

A joke, but unfortunately not from us. Thank you for pointing this out, we have found the error in the system.

Hello, According to the information available in our database, a batch of this article should reach us this month, but unfortunately without any guarantee.

Unfortunately, we cannot organise either. Regarding tempered glass, it is best to contact the manufacturer: https://support.hyte.com/hc/en-us?_ga=2.8393719.35965946.1661884318-415838632.1661884318

Yes, the top and rear covers and the filter frame at the bottom are only plastic.

But above. On the side only 240mm

Yes, of course, that's no problem. You can use normal ATX power supply units.

Yes, it is the colour snow white (CS-HYTE-Y60-WW).

I have a 4090 from Gigabyte air-cooled. It still has about 4mm of space to the glass. Certainly not ideal, but after countless hours in Cyberpunk2077 it didn't get above 60°C. I have not made a real benchmark. But I would be happy to do that on request.

We should probably be able to list the case soon. I am still clarifying this and will give you feedback here again.

You are welcome to contact our customer service directly regarding the product recording: https://helpcenter.digitec.ch/hc/de/requests/new

yes, 3x 120mm are installed. Two in the bottom for intake air and one in the top rear as outtake air. The fans are black and the blades grey.

Yes