EUR299,17
Ergotron HX Monitor Arm mit patentierter CF-Technologie
Table, 49"
Questions about Ergotron HX Monitor Arm mit patentierter CF-Technologie
What would you like to know?
0 questions and answers
Helpful answer
Basically, such monitor mounts must support the weight and possibly the height of the monitor alone. Size specifications such as -42" here, for example, should be regarded more as guidelines. The mount here is attached/screwed to the tabletop with two clamps (see Fig. 4) or can also be permanently mounted by means of a hole directly through the tabletop. Instructions: https://www.ergotron.com/portals/0/reserved/resources/3e1f0d4bb999407ebc471fbfecbe6554-orig.pdf
Helpful answer
Unfortunately, we cannot obtain this variant from any of our suppliers :(
Helpful answer
It should work, the fixing is standard.
Hi Bernd, I measured the distance of my HX monitor arm from the table top to the lower edge of the VESA mount - at maximum "extended" height. It is 32.5 cm. In my opinion, this will unfortunately not be enough. :-(
Helpful answer
Firstly, you need to check that the vesa standards are the same (100x100 200x200). If this is not the case, you will need to buy an adaptive plate to make it compatible. If they are the same then try to check if there are screws on the screen that allow you to remove the round part and uncover the fixing plate (this is often the case with competing brands). If neither of the two solutions work, it will be complicated. Good evening
Afaik no difference. Reference is made to the same manufacturer's number.
You cannot mount two monitors with this arm, but he is able to reach on top, so if you have two of the Arms this would work. Maybe this one would give you the possibility to mount two arms with the same mount point.
Is this stand ok for the LG 38WN95C-W curved monitor or do you need another stand to fix on a table?
Helpful answer
Depending on the characteristics of your monitor and stand yes they are compatible. :)
87mm gemäss diesem Dokument https://media.ergotron.com/reserved/resources/dim-hxsingledesk-orig.pdf
I fully agree with this! There can be no argument at all about design, functionality and stability. The only point of criticism is the fact that the mount does not come as a separate kit with the heavy duty adapter. By that I mean two separate kits, mount + standard adapter and mount with HD adapter (e.g. for the Samsung Odyssey+Neo). You really buy the mount with the standard adapter and then pay another 90,- for the HD adapter.
Hello, I have exactly the same monitor and the mount holds it just fine.
I have used it with a 32 inch Benq monitor and it worked well. Just check the total weight supported by the arm and if your model fits in you will be just fine.
Should fit, your screen has VESA 100 x 100 and this arm supports that too :)
Helpful answer
The distance between the suspension and the wall is about 12 cm. The arm is then naturally at an angle to the wall.
Fully stretched, it comes to 594 mm + screen thickness. Of course, it depends on what you intend to do with it. My table is 500 mm deep for gaming with the steering wheel. It is important to pay attention to the weight of the screen. It must not be lighter than 9 kg. I had a steel plate of 3 kg made so that it works with my odyssey g7 27".
Schritt 7-10 vielleicht nötig https://www.ergotron.com/portals/0/reserved/resources/888-45-345-g-orig.pdf
Helpful answer
Max. 4.4cm when delivered. With a little craftsmanship and some tinkering, up to 7.5cm possible (e.g. for USM tables).
This is because we work with different suppliers and daily prices. If, for example, one supplier can no longer deliver the device, but the other can, then we naturally change in order to be able to continue offering the product. With such a move, however, you have to expect that the price will adjust upwards or downwards. In addition, the price is also influenced by supply and demand, which can also lead to fluctuations. Currently, we cannot lower the price, I'm sorry.
Helpful answer
Hello Payload 19 kg, according to the description. The parts are very stable, also the holder for the table top. I use it with 32", 2x 24" so far no problems. The question is rather whether your table top can withstand it and not break out when the arm is fully extended...the surface for the bracket is only hand-sized.
This monitor arm can handle 75x75 mm and 100x100 mm. 200x200 mm is also possible with the Ergotron VESA mount adapter kit, but must be ordered separately.
I have answered your question here: https://www.digitec.ch/de/s1/QuestionAndAnswer/wie-genau-befestig-man-den-arm-an-den-tisch-ich-brauche-ein-tisch-mount-fuer-ein-acer-predator-x34-3-76367
Hello I would like to sell my monitor arm. Didn't realise my monitor was too light until after assembling. 1 week old, original packaging present (except the plastic bags). Are you still interested? If so, would 200 francs be ok?
30 of 30 questions