EUR103,53
Arctic Liquid Freezer III Pro 360 A-RGB
Questions about Arctic Liquid Freezer III Pro 360 A-RGB
What would you like to know?
0 questions and answers
Yes, the Arctic Liquid Freezer III Pro 240 AIO fits into the AeroCool Streak RGB because the case offers space for a 240 mm radiator at the front. The prerequisite is that there is sufficient installation space at the front and the radiator including fans can be mounted there.
Helpful answer
I had one with me, but it had almost dried out and I had to buy a new one anyway.
Galaxus
2 months ago
Yes, this AIO cooler is compatible with the Lian Li O11D EVO RGB case. It requires at least 63 mm clearance for installation of the 360 mm radiator and 38 mm thickness. Check the available space in your case for a trouble-free installation.
Automatically generated from the .
Helpful answer
Yes, never installed it myself, but it should fit. Be sure to check the compatibility of the motherboards on the Arctic website, occasionally the radiator head collides with the SSD. Also check case compatibility, radiator significantly thicker than standard.
Helpful answer
What kind of mainboard do you have? Question about the ramslot position.... (Not every board/manufacturer has them at the same height)
Galaxus
6 months ago
The cooling system fits into the Fractal Define 7 case, as this supports radiators up to 420 mm in length at the top and the radiator of the cooling system measures 360 mm. This means that it can be mounted at the top of the case.
The Asus Prime Z590-A mainboard and Corsair DDR4 Vengeance RGB Pro RAM are compatible with the cooling system, as the cooling system supports the standard LGA 1700 socket (for Intel Z590) and there are no restrictions regarding RAM types.
To summarise: The Arctic Liquid Freezer III Pro 360 fits into the Fractal Define 7 case and is compatible with the Asus Prime Z590-A motherboard and Corsair DDR4 Vengeance RGB Pro RAM.
Automatically generated from the .Galaxus
6 months ago
The cooler fits into the top of the Fractal Define 7 case, as the case supports radiators up to 420 mm in length at the top and the radiator of the cooler measures 360 mm. This means that the Liquid Freezer III Pro 360 A-RGB with its 360 mm radiator is compatible for mounting on the top of the Define 7.
Automatically generated from the .Yes, it is supplied. (MX-6)
Galaxus
9 months ago
Helpful answer
The fans are already pre-installed on the CPU water cooling system. The three 120 mm radiator fans are factory-fitted in a push configuration and the cables are integrated so that only one cable needs to be connected to the mainboard, which makes installation easier. This also applies to the Liquid Freezer III Pro 360 A-RGB, where all three fans are already attached and pre-wired.
Automatically generated from the .
Moin
So outside on the housing, okay that is a closed water cooling and you bad but not impossible the hoses off and water out and refill okay .....mit rivets and screws everything possible but must be. But it's also a big one. Don't forget the pump lower than the radiator otherwise air in the pump ....not good
10 of 10 questions